Controlling the infrared optical properties of rf-sputtered NiO films for applications of infrared window

In this paper, we will focus on an IR transmittance enhancement technique from the window material point of view by using metal oxides, especially nickel oxide (NiO). At first, anti-reflection (AR) coatings were modeled by using the optical properties of NiO films. The transmittance of the model was predicted using Swanepoel’s model and verified with NiO film prepared by rf magnetron sputtering. Also, post-deposition annealing was performed and was found to change the optical properties of the NiO film. Therefore, we analyzed the annealing effect on the IR optical properties of the NiO film. Furthermore, we confirmed the durability of the NiO film and verified the possibility of this material being used in infrared optics.     

酸性金属氧化物对锰铈氧化物催化剂脱硝温度窗口的调控作用

利用溶胶-凝胶法,采用三种酸性金属氧化物（氧化铌、氧化钨和氧化钼）对锰铈复合氧化物催化剂进行了改性. 测试了催化剂的氮氧化物选择性催化还原（SCR）活性,以筛选对应不同温度窗口的合适酸性氧化物改性剂. 同时评价了催化剂的NO氧化和NH₃氧化活性. 利用X射线衍射、BET比表面积测试、H₂程序升温还原、NH₃/NO_x程序升温脱附和NH₃/NO_x吸附红外光谱等手段对催化剂进行了表征. MnO_x-CeO₂催化剂表现出良好的低温（100-150 ℃）活性. 酸性金属氧化物的添加削弱了催化剂的氧化还原特性,从而抑制了NH₃的活化和NO₂辅助的快速SCR反应. 与此同时,相对高温（250-350 ℃）区NH₃的氧化也受到了抑制,B酸和L酸上的NH₃吸附得以增强. 因此,催化剂的SCR脱硝温度窗口向高温移动,改性效果Nb₂O₅ < WO₃ < MoO₃.     

Cross-Link-Functionalized Nanoparticles for Rapid Excretion in Nanotheranostic Applications

Most NIR-IIb fluorophores are nanoparticle-based probes with long retention (≈1 month or longer) in the body. Here, we applied a novel cross-linked coating to functionalize core/shell lead sulfide/cadmium sulfide quantum dots (PbS/CdS QDs) emitting at ≈1600 nm. The coating was comprised of an amphiphilic polymer followed by three crosslinked amphiphilic polymeric layers (P³ coating), imparting high biocompatibility and >90 % excretion of QDs within 2 weeks of intravenous administration. The P³-QDs were conjugated to an engineered anti-CD8 diabody (Cys-diabody) for in vivo molecular imaging of CD8+ cytotoxic T lymphocytes (CTLs) in response to anti-PD-L1 therapy. Two-plex molecular imaging in combination with down-conversion Er nanoparticles (ErNPs) was performed for real-time in vivo monitoring of PD-L1 positive tumor cells and CTLs with cellular resolution by non-invasive NIR-IIb light sheet microscopy. Imaging of angiogenesis in the tumor microenvironment and of lymph nodes deep in the body with a signal-to-background ratio of up to ≈170 was also achieved using P³-QDs.     

新型固定化pH梯度毛细管等电聚焦方法用于蛋白分离

通过化学键合建立一种固定化pH梯度的方法,用于毛细管等电聚焦分离蛋白质.采用微流控泵驱动毛细管内的聚焦区带,通过调节泵的流量,从而调节聚焦区带的迁移速度.该方法避免了自由溶液聚焦时两性电解质所带来的影响,实现了高灵敏度及检测波长自由选择等优点,适用于两步法毛细管电泳等电聚焦分离蛋白质等两性电解质.本文考察了对牛血清白蛋白和血红蛋白两种蛋白质混合物的分离,证明了该方法可行.     

基于灰度冗余的红外图像自适应输出窗技术

根据红外图像的特点,提出了一种基于灰度冗余的红外图像自适应输出窗技术.该技术通过对图像灰度直方图的统计,设定适当的阈值,将灰度像素分布为零的灰度级进行完全压缩,将小于阈值的灰度级映射到阈值灰度级,然后将有效灰度级在整个可显示灰度级范围内作等间距排列.该算法在压缩灰度冗余的同时,实现了对有效图像灰度级的无损均衡,提高了图像质量,并能实现实时处理.     

锥形透镜光纤聚焦特性研究

锥形透镜光纤(TLF)是实现光纤与平面光波光路(PLC)芯片高效耦合的核心元件。了解和掌握其聚焦特性是指导平面光波光路尾纤封装技术的关键。给出了表征锥形透镜光纤聚焦特性的两个参量出射光斑直径和远场发散角的理论分析模型,其误差小于1.14%;采用光束传播法数值模拟了锥形透镜光纤中的光波传输和模斑的演化,确定了锥形透镜光纤端面出射光斑的大小;优化锥形透镜光纤结构参量为:拉锥长度300μm,锥角0.733°,透镜曲率半径13.485μm;建立了基于数字摄像机的锥形透镜光纤出射光场测试系统,提出了物理光学反向推演法,计算出锥形透镜光纤聚焦光斑尺寸和远场发散角。理论与实验结果有着良好的一致:对于相同结构参量的锥形透镜光纤,实验反推法得到的出射光斑尺寸与理论值相比误差为3.15%,远场发散角误差为3.67%。     

Frequency-dependent acoustic energy focusing in hexagonal ceramic micro-scaffolds

Acoustic properties of an additive-manufactured SiC scaffold with hexagonal symmetry fabricated by the robocasting method are studied both numerically and experimentally. The numerical analysis is based on the finite element method (FEM) using Bloch boundary conditions. The calculations show both angular and frequency dispersion of the acoustic waves with wavelengths comparable to the spacing between the rods, i.e., on a millimeter scale, indicating interesting acoustic properties in the MHz range. The dispersion character leads to focusing of the energy propagation into the directions of the rods of the hexagonal structure. This is illustrated by modal-based calculations of the propagation of longitudinal and out-of-plane shear wave packets with a dominant wavelength. The experimental analysis consists of two steps, the measurement of the resonant spectrum and shear wave propagation character. The measured resonant spectrum is in good agreement with the one calculated using numerically obtained low-frequency properties of the structure, also showing the quality of the overall manufactured structure. The time-domain measurement shows significant changes in the energy propagation between low and high frequencies, as predicted by FEM calculations.     

非均匀波导中的声聚焦

理论研究了声波在非均匀波导中的空间聚焦问题,利用多模态导纳法构建波导内任意位置处声压与入射声压在模态域的映射关系,计算使声波聚焦于空间某位置时的最佳入射波,并画出了相应的聚焦声场.研究了三种非均匀情况:水平变截面波导、含散射体波导以及声速垂直变化波导.结果表明,当输入最佳入射波时,在非均匀波导中可以产生良好的单点或多点声聚焦效果,声波的聚焦过程充分地利用了波导结构及介质非均匀性对声波的散射作用.     

一种新的光致变色膜：Na2WO4-PAA-Glycerol体系研究

A method for preparing Na₂WO₄-PAA-Glycerol photochromic films was reported. The film was composed of Na₂WO₄, PAA and Glycerol, which were coated on a glass substrate. The film turned blue in the sun, and bleached to transparent in the darkness. The UV-Visible spectra showed strong absorbance at 300～500 nm, and the ABS changed signifanctly at 500～800 nm. The film showed the best photochromic behavior when n_Na2WO4∶n_PAA is 4%～5%. The mechanism was suggested that after irradiation, poly tunstate produced by Na₂WO₄ and PAA formed the tungsten blues. The tungsten blues were bleached due to oxidation back to poly tunstate by oxygen. The film showed not only an excellent photochromism property with rapid response and good reversibility, but also the simple techniques and good stability.     

Fabrication of thermo-responsive polymer nanocomposites for smart window applications

Abstract

Thermo-responsive polymers have attracted much attention in recent years because they can provide a variety of applications for smart devices, but the lack of sufficient mechanical properties and late response rate of the polymers limit their applications. In the current work, we fabricated polymer nanocomposites made from poly(vinyl methyl ether) and nanofillers with photothermal conversion property such as graphene oxide, antimony tin oxide nanoparticles, and silver nanoplates. The prepared nanocomposites showed rapidly reversible and reliable transparent-opaque transitions during the repeated heating and cooling processes, suggesting that they can be applied to smart window applications.