Simultaneous determination of nitroaromatic compounds in water using capillary electrophoresis with amperometric detection on an electrode modified with a mesoporous nano‐structured carbon material

In this article, a carbon disk electrode modified with mesoporous carbon material (CMK‐3) was used in CE with amperometric detection system for the simultaneous determination of four types of important nitroaromatic compounds, including 2,4,6‐trinitrotoluene (TNT), 1,3,5‐trinitrobenzene (TNB), 2,4‐dinitrotoluene (DNT) and 1,3‐dinitrobenzene (DNB). Compared with the bare carbon electrode, the CMK‐3 modified electrode greatly improved the sensitivity at a relatively positive detection potential due to its excellent electrocatalytic activities, high conductivity and large effective surface area. The four analytes could be well separated and detected within 480 s. A good linear response was obtained for TNB, DNB, TNT and DNT from 8.4 to 5.0×10³ μg/L, with correlation coefficients higher than 0.9992. And the detection limits were established between 3.0 and 4.7 μg/L for the four investigated nitroaromatic compounds (S/N=3). The CMK‐3‐modified electrode was successfully employed to analyze coking wastewater, tap water and river samples with recoveries in the range of 94.8–109.0%, and RSDs less than 5.0%. The presented results demonstrated that the CMK‐3‐modified carbon electrode used in CE with amperometric detection was of convenient preparation, high sensitivity and good repeatability, which could be employed in the rapid determination of practical samples.     

Probing mechanical properties of thin film and ceramic materials in micro- and nano-scale using indentation techniques

In this study, we report on the mechanical properties, failure and fracture modes in two cases of engineering materials; that is transparent silicon oxide thin films onto poly(ethylene terephthalate) (PET) membranes and glass-ceramic materials. The first system was studied by the quazi-static indentation technique at the nano-scale and the second by the static indentation technique at the micro-scale. Nanocomposite laminates of silicon oxide thin films onto PET were found to sustain higher scratch induced stresses and were effective as protective coating material for PET membranes. Glass-ceramic materials with separated crystallites of different morphologies sustained a mixed crack propagation pattern in brittle fracture mode.     

两相颗粒多孔材料导热系数研究

对固-气两相颗粒多孔材料导热系数的预测,尚未见以实验数据对其各预测模型进行分析及验证其准确度的相关文献。本文利用断电热线法测定石英砂、碳化硅、工程沙以及煤灰的导热系数;将模型预测结果与实验数据进行对比分析,结果表明,Kunii and Smith模型误差小;考虑孔隙率的影响,利用实测数据对Kunii and Smith模型进行修正,给出新的预测模型;通过与国外学者给出的实测导热系数的对比,验证了本文给出的修正模型的准确性。     

Magnetic and electronic properties of NiAs-type chromium chalcogenides

We have computed spin-dependent energy bands, spin moments and density of states of NiAs-type CrX (X=S, Se and Te) chalcogenides using linear combination of atomic orbitals method within density functional theory as well as full potential augmented plane wave method. In addition, magnetic properties have also been computed using spin polarized relativistic Korringa-Kohn-Rostoker method. We have also obtained the first ever theoretical electron momentum densities of CrX compounds considering linear combination of atomic orbitals and compared the results with the isotropic Compton profiles measured using 20 Ci ¹³⁷Cs Compton spectrometer. The Fermi surface topology and magnetic properties are discussed in terms of majority and minority energy bands and density of states. In addition, to highlight the role of Cr (3d) electrons in such type of chalcogenides, we have also reported the magnetic Compton profile of CrTe using the Korringa-Kohn-Rostoker method.     

基于数字图像相关的透明材料厚度测量

提出了一种测定透明材料厚度的新方法。该方法是基于透明材料对光的折射特点,利用光斑点面内位移与材料厚度的变化关系,将厚度的测量转化为对面内位移的测量。将此方法与数字图像相关法相结合,实现了单摄像机对厚度的测定。对轴向拉伸状态下的有机玻璃板的厚度变化进行了测定,将实验结果与理论值进行了对比,两者符合较好,证明了该实验方法的有效性和可行性。     

MRI investigation of granular interface rheology using a new cylinder shear apparatus

The rheology of granular materials near an interface is investigated through proton magnetic resonance imaging. A new cylinder shear apparatus has been inserted in the magnetic resonance imaging device, which allows the control of the radial confining pressure exerted by the outer wall on the grains and the measurement of the torque on the inner shearing cylinder. A multi-layer velocimetry sequence has been developed for the simultaneous measurement of velocity profiles in different sample zones, while the measurement of the solid fraction profile is based on static imaging of the sample. This study describes the influence of the roughness of the shearing interface and of the transverse confining walls on the granular interface rheology.     

空心碳半球锂离子电池负极的高倍率性能研究

以聚苯乙烯球为模板,通过水热法包裹硬碳层,又用微波法迅速引发聚苯乙烯核裂解的两步反应,制备了高比表面的空心碳半球.采用扫描电镜和透射电镜观察材料形貌,并测试该负极的电化学性能.在高倍率充放电条件下,与石墨、中间相碳微球电极相比,空心碳半球显现出了更高的容量和优异的寿命.     

A Nitrogen,Sulfur co-Doped Porphyrin-based Covalent Organic Framework as an Efficient Catalyst for Oxygen Reduction

Oxygen reduction reaction(ORR) is a significant reaction for energy conversion systems(such as fuel cells, metal-air batteries, etc.). It is an urgent need to develop cheap, durable and highly-active catalysts for efficient ORR. Hence, we report a metal-free nitrogen and sulfur co-doped porphyrin-based covalent organic framework(COF) as a high-efficiency ORR catalyst[the onset potential(E_o) is 0.79 V and the half-wave potential(E_1/2) is 0.70 V]. The double doping of N and S atoms causes uneven charge distribution around carbon atoms, which can act as catalytic active centers, improving ORR activity. Compared with single-atom doping, double atoms doping exhibits a higher activity due to the synergistic effect between different elements. These results demonstrate that reasonable design of stable metal-free COFs with a high electrochemical activity can promote their wide applications.     

Microporous Zinc Formate for Efficient Separation of Acetylene over Carbon Dioxide

Separation of acetylene(C₂H₂) from carbon dioxide(CO₂) by adsorbents is very challenging owing to their high similarity on molecular shape and dimension. Exploring inexpensive and easily available porous materials is of importance to facilitate the practical implementation of the challenging but energy-efficient separation. Herein, we utilize an easily available porous material[Zn₃(HCOO)₆] for the selective separation of C₂H₂ over CO₂. Because of the pore confinement in[Zn₃(HCOO)₆](pore size of 0.47 nm) and accessible oxygen sites for preferential binding of C₂H₂, this material exhibits high low-pressure uptake for C₂H₂(63 cm³/cm³ at 10 kPa and 298 K) and high C₂H₂/CO₂ selectivity(7.4 under ambient conditions) that is comparable to those of out-performing porous materials. The efficient separation of[Zn₃(HCOO)₆] for C₂H₂/CO₂ mixture has also been confirmed by the breakthrough experiments.     

Design of Functional Carbon Composite Materials for Energy Conversion and Storage

The carbon composite materials have been a research hotspot in the fields of catalysis, energy conversion and so on, because of their features of large structure and morphology variety, good chemical and electrochemical stability, and high electronic conductivity, large specific surface area and rich active sites. This paper summarizes some research progress of carbon composite materials, including assembly methodologies, their structure regulation, properties, and related applications. Moreover, the current challenges and the prospects of these materials are also discussed.