Preparation and Characterization of Microencapsulated Hexadecane Used for Thermal Energy Storage

Polyurea microcapsules about 2.5μm in diameter containing phase change material for thermal energy storage application were synthesized and characterized by interfacial polycondensation method with toluene-2,4-diisocyanate and ethylenediamine as monomers in an emulsion system. Hexadecane was used as a phase change material and OP, which is nonionic surfactant, and used as an emulsifier. The chemical structure and thermal behavior of the microcapsules were investigated by FTIR and thermal analysis respectively. The results show encapsulated hexadecane has a good potential as a solar energy storage material.     

Selection of Anodic Material Used in Electrolytic Process for Producing Hypophosphorous Acid

Black lead, Ti-Ru and Ti-PbO2 were used as anode and stainless steel was used as cathode The electrolytic process of producing hypophosphorous acid with four-compartment electrodialytic cell was studied. The comparison of some factors, such as anodic voltage, product concentration and current efficiency, of black lead, Ti-Ru, and Ti-PbO2 electrodes was conducted. As a result, theTi-PbO2 electrode is the optimal anode material used, it can be in electrolytic process for producing hypophosphorous acid.     

Time-resolved ultraviolet laser-induced breakdown spectroscopy for organic material analysis

Ultraviolet pulses (266 nm) delivered by a quadrupled Nd:YAG laser were used to analyze organic samples with laser-induced breakdown spectroscopy (LIBS). We present characteristics of the spectra obtained from organic samples with special attentions on the emissions of organic elements, O and N, and molecular bonds CN. The choice of these atomic or molecular species is justified on one hand, by the importance of these species to specify organic or biological materials; and on the other hand by the possible interferences with ambient air when laser ablation takes place in the atmosphere. Time-resolved LIBS was used to determine the time-evolution of line intensity emitted from these species. We demonstrate different kinetic behaviors corresponding to different origins of emitters: native atomic or molecular species directly vaporized from the sample or those generated through dissociation or recombination due to interaction between laser-induced plasma and air molecules. Our results show the ability of time-resolved UV-LIBS for detection and identification of native atomic or molecular species from an organic sample.     

Charge storage mechanism of copper hexacyanoferrate nanocubes for supercapacitors

The widely accepted theory concerning the electrochemical energy storage mechanism of copper hexacyanoferrate (CuHCF) for supercapacitors is that CuHCF stores charge by the reversible redox processes of Fe³⁺/Fe²⁺ couple and Cu cations are electrochemically inactive. In this work, CuHCF nanocubes (CuHCF-NC) were synthesized in the presence of potassium citrate and its electrochemical properties were tentatively studied in 1 mol/L Na₂SO₄ aqueous electrolyte. Good supercapacitive performance was exhibited. The combined analyses of cyclic voltammogram (CV) and X-ray photoelectron spectroscopy (XPS) disclosed that the CuHCF nanocubes underwent the redox reactions of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺ couples to store charges. The Cu²⁺/Cu⁺ redox couple was activated due to the strong coordination interaction between the carboxylate groups of citrate ions and surface Cu cations.     

Structure and magnetic properties of Ca14MnP11

The compound Ca₁₄MnP₁₁ crystallizes in the Ca₁₄AlSb₁₁ structure type with the tetragonal space group I4₁/acd (Z=8) and lattice parameters of , c=20.7565(9) at 90 K. The structure consists of MnP₄⁹⁻ tetrahedron, P₃⁷⁻ trimer, 4 P³⁻ isolated anions and 14 Ca²⁺ cations. Similar to other compounds of this structure type containing phosphorous, the P₃⁷⁻ trimer has a central P atom that is best modeled in the structure as being equally split between two sites. In addition, there is no additional distortion of the manganese-containing tetrahedron compared with the main group analog, Ca₁₄GaP₁₁, suggesting that the Mn oxidation state is Mn²⁺. Temperature-dependent magnetic susceptibility shows that the compound is paramagnetic over the entire temperature range measured (2-300 K). The data can be fit with a modified Curie-Weiss law and provide an effective magnetic moment of 5.80 (2) B.M. with a Weiss constant of −2.13(2) K and . This moment is significantly higher than those measured for any of the Mn-containing analogs and is consistent with Mn²⁺. This result will be discussed in light of the electron counting scheme for Mn compounds of the Ca₁₄AlSb₁₁ structure-type.     

Cathodic materials for lithium-ion batteries based on spinels Li x Mn2−y Me y O4: Synthesis, phase composition, and structure of Li x Mn2−y Cr y O4 at x = 1.0−1.2 and y = 0−0.5

Extralithiated chromium-doped finely divided lithium-manganese spinels are synthesized as a result of a two-step solid-phase process with use made of the fusion-saturation method. The spinels are intended for application as cathodic materials in lithium-ion batteries. The phase composition and structural characteristics of samples of cathodic materials of the type Li _x Mn_2?y Cr _y O₄ are studied. The samples with x = 1.0?1.2 and y = 0?0.5 are characterized by phase purity and cubic syngony with parameter a = 0.817?0.823 nm and a disperseness equal to 1–2 nm. The maximum content of chromium and lithium in Li _x Mn_2?y Cr _y O₄ that does not lead to violation of cubic syngony is determined. Lithium excess in the cathodic material that does not exceed 0.2 formula units may be used for compensating the irreversible capacity. Replacing some manganese atoms by chromium may facilitate retention of the structures’s integrity in the course of cycling.     

环状芴基张力半导体拉曼光谱理论与实验研究

环状芴基张力半导体由于其特殊的分子结构，发射状排布的p轨道和纳米级空腔等诸多特点，引起了科学家广泛的关注.相对于直链型芴基半导体，环状芴基张力半导体展现出独特的光电性质.然而，迄今为止其振动性质没有被报道.对四元环芴的晶体与直链四聚芴粉末样品进行拉曼光谱表征和归一化处理，并结合理论计算.结果表明，与直链寡聚芴相比，环芴类似于碳纳米管的G峰发生了偏移，并且低频区域拉曼频移峰的峰强增加.其原因是由于张力的引入，改变了芴基主链的骨架和电子结构，加强芴骨架上π电子离域，同时使环芴中每个芴单元都参与到振动中.该研究结果为芴基张力半导体材料拉曼光谱的研究提供了一定的工作基础.     

Green-synthesized,low-cost tetracyanodiazafluorene (TCAF) as electron injection material for organic light-emitting diodes

As facile,green,low-cost as possible:One more electron-deficient azaacene (TCAF) with deep LUMO (-4.52 eV), strong electronic affinity,excellent yield,and simple purification procedure was successfully created and explored as good electron injection material.It is believed TCAF would be a promising and pervasive acceptor material and bring in more significant achievements to green and sustainable organic electronics including OLEDs,OFETs,OPVs, and perovskite solar cells,etc.     

有机-无机纳米复合材料光谱与电子性质研究进展

有机-无机纳米复合材料的研究在当前纳米科学技术的发展中占有重要地位，开创了材料与催化科学研究的新纪元。自从10年前首次合成纳米孔无机材料MCM-41至今，该领域研究不断深入，已展现出广阔的应用前景。当客体有机分子分散于纳米孔道内部时，其分子性质将产生明显变化。本文结合作者近期研究成果，力图从实验与理论两方面阐明在纳米复合体系中客体分子性质变化的原因。     

具有双螺旋链的新型二维无机-有机骨架晶体材料Ni(PDC)(H2O)2的合成与结构

本文报道由H2PDC合成的新型维层状无机-有机骨架晶体Ni(PDC)(H2O)2(H2PDC=吡啶-2,5-二羧酸), 该化合物的一层是由右手螺旋Ni—O—C链与左手螺旋Ni-pdc链组成, 而邻近的一层则是由左手螺旋Ni—O—C链与右手螺旋Ni-pdc链组成, 层与层之间通过氢键作用形成了三维超分子结构. 用ICP、TG、IR和X射线单晶衍射分析等手段对其结构进行表征.