Comparison of pre-reducing agents for antimony determination by hydride generation atomic fluorescence spectrometry

A systematic study of antimony reduction prior to its determination by hydride generation atomic fluorescence spectrometry (HG-AFS) was carried out. The efficiency of l-cysteine, potassium iodide and potassium iodide/ascorbic acid was studied for this purpose. The hydride generation step was optimised in the presence of those pre-reductors. From the results, l-cysteine was found to be the most suitable pre-reducing agent. Methodology was validated, obtaining detection limits lower than 90 ng l⁻¹ and repeatability and reproducibility better than 3% R.S.D. and 5% R.S.D., respectively, in all cases. In order to evaluate the methodology developed and the influence of the matrix, recovery from waters from different sources was tested by HG-AFS and also by inductively coupled plasma mass spectrometry (ICP-MS). Accuracy was assessed by analysing three water reference materials at different antimony concentration levels. The high sensitivity of the developed methodology enables it to be applied for monitoring drinking waters according to the maximum admissible concentration of antimony established by the EU Directives.     

Hydrothermal Synthesis and Crystal Structure of a Cadmium（Ⅱ） Polymer with One-dimensional Chain Structure： [Cd（MDPPz）（BDC）（H2O）]n

A metal-organic coordination compound formulated as [Cd(MDPPz)(BDC)(H2O)]n 1 (MDPPz=11-methyldipyrido[3,2-a:2',3'-c]phenazine,BDC=1,4-benzenedicarboxylate) has been hydrothermally synthesized and structurally characterized by elemental analysis,IR spectrum,fluorescence spectrum and single-crystal X-ray diffraction. The title compound crystallizes in the monoclinic system,space group C2/c,with a=30.673(8),b=9.623(3),c=20.784(6) ,β=98.646(3)o,V=6065(3)3,C27H17CdN4O5,Mr=589.85,Dc=1.292 g/cm3,μ(MoKα)=0.757 mm-1,F(000)=2360,Z=8,the final R=0.0381 and wR=0.0855 for 4191 observed reflections (I>2σ(I)). 1 exhibits blue fluorescence property at room temperature.     

氧弹分解-原子荧光法测定煤中汞的研究进展

介绍氧弹分解-原子荧光法测定煤中汞含量的研究进展。影响该方法主要因素为称样量、氧气浓度、吸收剂、还原剂、煤种以及灰分含量。分别综述了各个因素对该方法的影响,可为相关标准的制定提供参考。该方法能够简单、经济、快速地测定煤中汞的含量,但是目前学者们对于该方法的相关研究还存在分歧,需要进一步的研究验证;同时,还需要注意以下几个研究方向:吸收剂和还原剂的选择对汞回收率的影响;吸收剂在密闭氧弹中对汞的回收率及吸收时间的研究;氧弹废气中汞含量的测定;煤种和灰分含量对汞含量测定的影响。     

原油三维荧光分析中猝灭现象辨析

研究了原油的三维荧光猝灭现象，指出浓度过高是原油产生荧光猝灭的主要原因，将会造成三维荧光等值线图畸变，致使定量分析数据失真，谱图特征变异，难以获取原油特征三维指纹图。提出了避免荧光猝灭的预试方法，并列出了不同类型原油的最佳测试浓度。     

A novel approach for simultaneous determination of polycyclic aromatic hydrocarbons by Shpol'skii non-linear variable-angle synchronous fluorescence spectrometry

A new method of combining low-temperature Shpol'skii effect with non-linear variable-angle synchronous fluorescence spectrometry (L-NLVASFS) has been proposed to increase spectral resolution. This coupled method was applied successfully to the simultaneous identification and quantification of some polycyclic aromatic hydrocarbons (PAHs) in mixtures, which cannot be determined by non-linear variable-angle synchronous fluorescence spectrometry at room-temperature (R-NLVASFS). The usefulness of this method is demonstrated by the analyses of synthetic mixtures and several real samples of airborne particulates.     

Coherent anti-Stokes Raman Scattering Microscopy.

Coherent anti-Stokes Raman scattering (CARS) microscopy is presented as a new nonlinear optical technique. The combination of vibrational spectroscopy and microscopy allows highly sensitive investigations of unlabelled samples. CARS is an ideal tool for studying a broad variety of samples. The main drawback of the technique is its non-zero-background nature, which implies that the signal has to be detected against a nonresonant background. The need to solve this problem is reflected in the rapid technological developments that have been observed during the last decade. Recent results show that CARS microscopy has the potential to become an important complementary technique that can be used with other well-established microscopic methods. Although it has some limitations, it offers unique access to many problems that cannot be tackled with conventional techniques. For this reason, it can be expected that the impressive growth of the field will continue.     

Photolytic oxidation of As species for determination of total As (including the ‘hidden’ As fraction) in coastal seawater by hydride generation-atomic fluorescence spectrometry

Ultraviolet irradiation (photolysis) in alkaline medium was applied for pretreatment of seawater samples so as to accurately determine total As by continuous-flow hydride generation-atomic fluorescence spectrometry. This sample pretreatment is meant to convert non-reducible As forms into inorganic As, which easily forms arsine. The optimised parameters were the treatment time and the pH of the medium. The behaviour of four hydride-reactive As species [As(III), As(V), MMA, DMA], and AsB, i.e. a typical non-hydride-reactive As species, when subjected to UV irradiation was studied. UV irradiation at pH 1 lead to conversion of all species into As(V) with the exception of AsB and DMA. Conversions of DMA and AsB into As(V) at pH 11 in less than 30 min were observed under UV irradiation. The limit of detection of As (measured as As(V)) by hydride generation-atomic fluorescence spectrometry was 0.1 μg/L and the repeatability of the oxidation procedure was about 10%. The method was applied to determination of total and directly reducible As at 11 sampling points of the Galician Coast (Atlantic Ocean, Spain). Total As concentrations were in the range 1.4-4.8 μg/L. A significant As fraction, between 20 and 44%, depending on the sampling point, corresponded to non-reducible As which was converted by UV irradiation into hydride-reactive As. This fraction should represent the sum of DMA, which yields a low sensitivity in the continuous flow-AFS system, and the hidden As fraction.     

Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

Investigation of the Declared Value of Selenium in Food Supplements by HG-AFS

The method of hydride generation atomic fluorescence spectrometry (HG-AFS) was optimised for determination of selenium in food supplements. Due to the high and varied content of Cu, Mg and Zn in the samples, the standard addition method was found to be the most appropriate. The reliability of the method was checked by the independent method of radiochemical neutron activation analysis, and good agreement was found between the two methods. HG-AFS is simple and rapid for Se determination in food supplements based on minerals. Agreement between the selenium values found and declared was worse than 10% in 9 out of 13 supplements. Furthermore, 2 of the 14 supplements did not comply with the recommendations stated in the 27^th edition of the U.S. Pharmacopoeia, which states that minerals and vitamins in food supplements should be in the range of 90 and 200% of the declared value.