Cure mechanism of novel bismaleimide resins based on fluorene cardo moiety and their thermal properties

In this paper, two novel bismaleimide resins based on 9, 9-bis[4-(4-maleimidophenoxy) phenyl] fluorene (PFBMI), 9, 9-bis[4-(4-maleimidophenoxy)-3-methylphenyl]fluorene (MFBMI), and 2, 2’-diallyl bisphenol A (DABPA) were prepared. Their curing mechanism and curing kinetic were carefully investigated by Differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The thermal mechanical properties of the composites based on these BMI resins and the glass cloth were obtained by Dynamic mechanical analysis (DMA), displaying that the novel resins whose T_g were 296°C and 289°C had excellent thermal performance. In addition, Thermogravimetric analysis (TGA) results showed that both the cured PD and MD resins possessed good thermal stability, and their T_5% were all higher than 410°C.     

Amphiphilic block and statistical copolymers with pendant glucose residues: Controlled synthesis by living cationic polymerization and the effect of copolymer architecture on their properties

Amphiphilic block and statistical copolymers of vinyl ethers (VEs) with pendant glucose residues were synthesized by the living cationic polymerization of isobutyl VE (IBVE) and a VE carrying 1,2:5,6‐di‐O‐isopropylidene‐D ‐glucose (IpGlcVE), followed by deprotection. The block copolymer was prepared by a two‐stage sequential block copolymerization, whereas the statistical copolymer was obtained by the copolymerization of a mixture of the two monomers. The monomer reactivity ratios estimated with the statistical copolymerization were r₁ (IBVE) = 1.65 and r₂ (IpGlcVE) = 1.15. The obtained statistical copolymers were nearly uniform with the comonomer composition along the main chain. Both the block and statistical copolymers had narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ∼ 1.1). Gel permeation chromatography, static light scattering, and spin–lattice relaxation time measurements in a selective solvent revealed that the block copolymer formed multimolecular micelles, possibly with a hydrophobic poly(IBVE) core and a glucose‐carrying poly(VE) shell, whereas the statistical copolymer with nearly the same molecular weight and segment composition was molecularly dispersed in solution. The surface properties of the solvent‐cast films of the block and statistical copolymer were also investigated with the contact‐angle measurement. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 459–467, 2001     

High‐throughput characterization of pattern formation in symmetric diblock copolymer films

Surface‐pattern formation in thin block copolymer films was investigated by utilizing a high‐throughput methodology to validate the combinatorial measurement approach and to demonstrate the value of the combinatorial method for scientific investigation. We constructed measurement libraries from images of subregions of block copolymer films having gradients in film thickness and a range of molecular mass, M. A single gradient film covers a wide range of film morphologies and contains information equivalent to a large number of measurements of films having a fixed thickness, h. Notably, the scale of the surface patterns is generally much larger than the molecular dimensions so that the interpretation of the patterns is more subtle than ordering in bulk block copolymer materials, and there is no predictive theory of this type of surface‐pattern formation. We observed a succession of surface patterns that repeat across the film with increasing h [extended smooth regions, regions containing circular islands, labyrinthine (“spinodal”) patterns, holes, and smooth regions again]. The extended smooth regions and the labyrinthine patterns appear to be novel features revealed by our combinatorial study, and these patterns occurred as bands of h that were quantized by integral multiples of the bulk lamellar period, L_o. The magnitude of the height gradient influenced the width of the bands, and the smooth regions occupied an increasing fraction of the film‐surface area with an increasing film gradient. The average size of the spinodal patterns, λ, was found to scale as λ ～ L or λ ～ M^?1.65 and reached a limiting size at long annealing times. The hole and island features had a size comparable to λ, and their size likewise decreased with increasing M. The smooth regions were attributed to an increase in the surface‐chain density in the outer brushlike block copolymer layer with increasing h, and the scaling of λ with M was interpreted in terms of the increasing surface elasticity with M. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2141–2158, 2001     

Synthesis of an amphiphilic styrenic block copolymer: Polycondensation of dichloromethane and low molecular weight poly(ethylene glycol) in the presence of hydroxypropylated polystyrene‐block‐polybutadiene

An amphiphilic styrenic block copolymer, polystyrene‐block‐polybutadiene‐block‐poly[oxymethylene‐alt‐oligo(oxyethylene)] (PS‐b‐PB‐b‐POME), was synthesized through a polycondensation reaction of low molecular weight poly(ethylene glycol) and dichloromethane in the presence of hydroxypropylated polystyrene‐block‐polybutadiene (PS‐b‐PB‐OH) used as a monofunctional chain‐capping reagent. PS‐b‐PB‐OH was in turn prepared via an anionic synthesis of PS‐b‐PB followed by oxetane capping and methanol quenching. Although PS‐b‐PB‐OH has insignificant hydrophilicity, PS‐b‐PB‐b‐POME containing both the hydrophobic PS‐b‐PB segment and the hydrophilic POME segment had an improved emulsifying capability and effectively decreased the interfacial tension between water and toluene. The hydrophile–lipophile balance value of this amphiphilic PS‐b‐PB‐b‐POME copolymer, consisting of 86 wt % of the POME segment and 14 wt % of the PS‐b‐PB segment, was 17.2. The molecular weight of the copolymer molecule was determined by gel permeation chromatography–multi‐angle laser light scattering, and the microstructure was analyzed using ¹H NMR. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2625–2632, 2001     

Inclusion complexes of α‐cyclodextrin and (AB)n block copolymers

Cyclodextrins thread onto polymer chains to form inclusion complexes, especially when the polymer is hydrophobic relative to the solvent. Selective threading might occur when the polymer architecture contains both hydrophobic and hydrophilic segments. α‐Cyclodextrin formed crystalline inclusion complexes with (AB)_n microblock copolymers, where the A block was a linear alkyl segment containing a single double bond and the B block was an exact length segment of poly(ethylene oxide). The complexes were isolated and characterized by solution and solid‐state NMR, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. Each method confirmed complex formation and showed that the physical properties of the complexes were distinct from those of its individual components. The X‐ray data were consistent with known inclusion complexes having a channel or column crystal structure. The stoichiometry of the complex formation, 2.3 α‐cyclodextrin rings per polymer repeat unit, was determined by NMR analysis of the complexes and from an analysis of the inclusion complex yields. The data suggest that the inclusion complex stoichiometry is defined by the increasing insolubility of the polymer–cyclodextrin complex. Solid‐state NMR data were consistent with a preference for threading onto hydrophobic segments of the (AB)_n polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2731–2739, 2001     

Syntheses of amphiphilic block copolymers by living cationic polymerization of vinyl ethers and their selective solvent‐induced physical gelation

Amphiphilic diblock copolymers were prepared by the living cationic polymerization of vinyl ethers in the presence of added bases, and their selective solvent‐induced physical gelation behavior was investigated. The block copolymerization of 2‐phenoxyethyl vinyl ether (PhOVE) and 2‐methoxyethyl vinyl ether (MOVE) was carried out in the presence of ethyl acetate with Et_1.5AlCl_1.5 in toluene at 0 °C. Despite the rate difference, diblock copolymers with a very narrow molecular weight distribution were obtained, quantitatively. By adding the selective solvent, water, to the acetone solution of the diblock copolymer, PhOVE₂₀₀‐b‐MOVE₄₀₀, physical gelation occurred suddenly and the system ceased to flow, maintaining transparency. Viscoelastic measurements and transmission electron microscopic observations were performed to examine the characteristic gelation behavior and structure of the obtained gels. Various gelation conditions and physical gelation by other amphiphilic block copolymers were also designed on the basis of the solubility of each block segment. Further, new forms of physical gelation, accompanied by the solubilization of immiscible organic compounds, were achieved using similar diblock copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3190–3197, 2001     

苯乙烯-异戊二烯两嵌段共聚物溶液的dn/dc和紫外吸收光谱

本文研究了苯乙烯-异戊二烯两嵌段共聚物在CHCl_3中的折光指数浓度增量(dn/dc)和紫外吸收光谱。嵌段共聚物dn/dc具有很好的加和性,可以测定嵌段共聚物的组成。紫外吸收光谱的结果表明,除低苯乙烯含量的样品外,其它嵌段共聚物都显示明显的紫外增色性(UV hyperchromism)。因此UV和UV-RI双检测GPC不会得到可靠的嵌段共聚物组成数据。这种增色现象与其特征的紫外吸收谱图紧密关联     

EVA-g-VC的结构和动态粘弹性

本文研究了聚乙烯-醋酸乙烯酯(EVA,VAc:14％)与氯乙烯(VC)接枝共聚物(EVA-g-VC)的相结构和分子结构。接枝物EVA-g-VC由游离EVA、均聚PVC和EVA-VC接枝高分子三者组成,EVA呈连续相,PVC呈分散微粒。EVA-g-VC中EVA的含量越高,PVC粒子体积越小。实验结果表明,接枝物中“凝胶”的EVA玻璃化温度,随投料比(VC/EVA)的减小而升高;另外随VC/EVA减小,凝胶中PVC的含量和PVC的分子量也减小。这些结果说明,VC/EVA较小时得到的接枝物中,EVA上VC接枝点的数目较多,而PVC接枝链的长度较短。EVA-VC是不相容两相——EVA和PVC的“粘着剂”,其作用表现在:VC/EVA越小,接枝物中EVA和PVC的玻璃化温度越靠近。     

Comparison of Bottom-up Filling in Electroless Plating with an Addition of PEG,PPG and EPE

The bottom‐up filling capabilities of electroless copper plating bath with an addition of additives, such as polyethylene glycol (PEG), polypropylene glycol (PPG) and triblock copolymers of PEG and PPG with ethylene oxide terminal blocks termed EPE, were investigated by the cross‐sectional scanning electron microscopy (SEM) observation of sub‐micrometer trenches. Though three additives had inhibition for electroless copper deposition, the suppression degrees of three additives were different. EPE‐2000 had the strongest suppression for electroless copper deposition, and the suppression of PEG‐2000 was the weakest. The bottom‐up filling capability of electroless copper was investigated in a plating bath containing different additives with the concentration of 2.0 mg/L. The cross‐sectional SEM observation indicated the trenches with the width of 280 nm and the depth of 475 nm were all completely filled by the plating bath with an addition of EPE‐2000, but the trenches were not completely filled by the plating bath with an addition of PEG‐2000 or PPG‐2000, and some voids appeared. Linear sweep voltammetry measurement indicated that three additives all inhibited the cathodic reduction reaction and the anodic oxidation reaction, and the inhibition of EPE‐2000 was the strongest among three additives, which agreed with that of the deposition rate of electroless copper. Significant differences in surface roughness of deposited copper film were observed by UV‐visible near‐infrared for different suppressors, and the bright and smooth of deposited copper film were in accordance with the inhibition of three additives.     

Influence of Preparation Conditions on Structural Stability of Ordered Mesoporous Carbons Synthesized by Evaporation-induced Triconstituent Co-assembly Method

Various ordered mesoporous carbons (OMCs) have been prepared by evaporation-induced triconstituent co-assembly method. Their mesostructural stability under different carbon content, aging time and acidity were conveniently monitored by X-ray diffraction, transmis-sion electron microscopy, and N₂ sorption isotherms techniques. The results show mesostruc-tural stability of OMCs is enhanced as the carbon content increases from 36% to 46%, further increasing carbon content deteriorates the mesostructural stability. Increasing aging time from 0.5 h to 5.0 h make the mesostructural stability go through an optimum (2.0 h) and gradually reduce framework shrinkage of the OMCs. Highly OMCs can only be obtained in the acidity range of 0.2～1.2 mol/L HCl, when the acidity is near the isoelectric point of silica, the resulting OMCs have the best mesostructure stability. Under the optimum condi-tion, the carbon content of 46%, aging time of 2.0 h, and 0.2 mol/L HCl, the resulting OMCs have the best mesostructure stability and the highest BET surface areas of 2281 m²/g.