Principle of a new immunoassay based on electrophoretic mobility of poly(styrene/alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol) microspheres: application for the determination of helicobacter pylori IgG in blood serum

The principle of a novel latex diagnostic test for the determination of antibodies against Helicobacter pylori in blood sera is described. The test is based on the measurement of the electrophoretic mobility of the microspheres with immobilized H. pylori antigens. The electrophoretic mobility of these microspheres depends on the concentration of the antibodies against H. pylori in suspending medium. Particles with hydrophilic polyglycidol in the surface layer were used for the test. The microspheres were obtained by an emulsifier-free emulsion copolymerization of styrene and alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol macromonomer (D(n) = 220 nm, diameter polydispersity factor D(w)//D(n) = 1.02). Activation of polyglycidol hydroxyl groups with cyanuric chloride allowed for covalent immobilization of H. pylori antigens. The fraction of H. pylori not specifically adsorbed onto the microspheres was negligible. Changes of the electrophoretic mobility of the microspheres with the surface concentration of the covalently immobilized H. pylori antigens Gamma = (1.6 +/- 0.3) . 10(-3) g m(-2) were suitable for the detection of the antibodies in the sera of patients with titer in the range (determined by the indirect ELISA test) from 1:500 to 1:32 000.     

MALDI-TOF-MS法对重组人内皮抑素蛋白分子质量测定

肿瘤的生长依赖于血管的生成,新生血管不仅为肿瘤生长提供必需的营养物质,而且为肿瘤细胞扩散提供了重要的途径。1997年哈佛大学的O'Reilly等发现了一种内源性新血管生成抑制因子内皮抑素(Endoscatin),显示出特异抑制激活的血管内皮细胞增殖和肿瘤新血管生成的生物学活性,其抗肿瘤作用具有高效、低毒、无耐药性的优点。目前,内皮抑素的研究引起了国内外广泛的兴趣,在美国已进行以安全性为目的的I期临床实验,国内也有多家公司对内皮抑素进行了抗肿瘤研究并申报一类新药。内皮抑素有望成为医治肿瘤而又没有化疗和放疗的毒副作用的一种新的治疗方法,但是否能作为药物应用于临床,尚需对内皮抑素的结构特点及抑制肿瘤和内皮细胞的作用机制等方面进行许多深入的研究。     

Assessment of corrosion resistance of surface-coated galvanized steel by analysis of the AC impedance spectra measured on the salt-spray-tested specimen

In the present work, corrosion resistance of surface-coated galvanized steel was quantitatively determined by an analysis of the alternating current (AC) impedance spectra measured on the salt-spray-tested specimen. To evaluate the corrosion resistance of the surface-coated galvanized steel, AC impedance spectroscopy was performed on the salt-spray-tested specimen previously exposed to salt-sprayed corrosive environment. From the analysis of the impedance spectra, the area fraction transient of white rust θ ₂(t) was theoretically derived from the equivalent circuit equation by using two fitting parameters. The values of the two fitting parameters were determined by fitting the empirical transient equations to the area fraction of the resin coating layer and to the total resistance obtained from the impedance spectra measured, respectively. From the analyses of θ ₂(t) for four kinds of surface-coated galvanized steels with various resin coating layers, it is indicated that as the values of the two fitting parameters decrease in the order of CP, GI, OD and OM (commercial trade names) specimens, the corrosion resistance increases in that order as well. Furthermore, from the quantitative comparison of the two fitting parameters with the polarization resistance of the upper resin coating layer R _p determined from the potentiodynamic polarization curve, it is suggested that the two fitting parameters decrease in value as well with increasing R _p.     

基质辅助激光解吸附飞行时间质谱分析缩合单宁的阳离子化问题

以单价金属离子Cs 和Na 作为离子化试剂,对3种缩合单宁进行基质辅助激光解吸附飞行时间(MALD I-TOF)质谱分析。加入Na 作为阳离子化试剂,能得到较高质量的质谱图。但由于实验通道中几乎不可能完全去除的K 的干扰而会高估棓儿茶酚/表棓儿茶酚单元的组成比例,从而影响对棓儿茶酚/表棓儿茶酚单元存在与否的判断;选择Cs 作为阳离子化试剂可以避免此问题,但在复杂的缩合单宁分析中,同样因为杂质离子Na 和K 的干扰而使得质谱图变得更复杂;未去离子处理直接对缩合单宁进行MALD I-TOF质谱分析与去离子并加入Cs 的处理比去离子并加入Na 能检测到更高聚合度的高聚物,检测到离子峰强度最高的聚合物随离子不同而不同。     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.

A result on hypothesis testing for a multivariate normal distribution when some observations are missing

Let U_i = (X_i, Y_i), i = 1, 2,…, n, be a random sample from a bivariate normal distribution with mean μ = (μ_x, μ_y) and covariance matrix

. Let X_i, i = n + 1,…, N represent additional independent observations on the X population. Consider the hypothesis testing problem H₀ : μ = 0 vs. H₁ : μ ≠ 0. We prove that Hotelling's T² test, which uses (X_i, Y_i), i = 1, 2,…, n (and discards X_i, i = n + 1,…, N) is an admissible test. In addition, and from a practical point of view, the proof will enable us to identify the region of the parameter space where the T²-test cannot be beaten. A similar result is also proved for the problem of testing μ_x ? μ_y = 0. A Bayes test and other competitors which are similar tests are discussed.     

The use of silicon in the preparation of apolar glass capillary columns

As an extention of previous reports, variables affecting the performance of columns modified by silicon deposition have been optimized. The aim of this work was to produce thermostable apolar glass capillary columns regardless of the glass type used and to maintain column performance under stressful conditions. The main parameters studied were the influence of glass type, leaching effects, and silicon layer thickness on column activity. Deactivation and stationary phase conditions were held constant. Both coated and uncoated columns were tested. The thickness of the silicon layer was found to be relatively unimportant. There was no difference whether soft glass or borosiiicate glass was used and leaching before silicon deposition did not influence column activity. Bare silicon surfaces showed considerable activity especially in respect to interactions with free acids and bases. There are indications that the surface consists of silicon oxide and other oxygenated forms of silicon rather than of the element. Treatment of the silicon layers with dilute hydrofluoric acid and the strict exclusion of traces of oxygen and water did not improve the situation. In spite of such specific interactions, silicon surfaces were easily deactivated by heat treatment with polysiloxanes. Silicon surfaces deactivated by baking with octamethyltetrasiloxane at 400°C are inert and temperature stable and show characteristics similar to persilylated surfaces.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

A practical approach to the implementation of autoverify

Autoverification is a process in which computer software will automatically evaluate laboratory test results, verify result integrity, and then release the results to the hospital interface without any technologist intervention. Autoverify release criteria are user defined and can be customized. The process of developing, implementing, and monitoring autoverify is achievable for most test results in laboratory medicine. The use of autoverification will improve result quality, increase revenue, and create faster turn-around times. All of this put together will ultimately lead to improved customer satisfaction. Computers and autoverification are survival tools in the competitive market of laboratory diagnostics services.Presented at the 8th Conference on Quality in the Spotlight, 17–18 March 2003, Antwerp, Belgium     

Tamarindus indica mucilage and its acrylamide-grafted copolymer as flocculants for removal of dyes

The application of Tamarindus indica seed mucilage (Tam), a food grade polysaccharide, and its acrylamide grafted copolymer as flocculants was assessed for the first time for removal of various types of dyes from model textile wastewater containing azo, basic, and reactive dyes. Acrylamide grafted T. indica mucilage (Tam-g-PAM) was obtained by ceric ion initiated polymerization technique. A series of contact time experiments were conducted to assess the system variables such as concentrations of mucilage and dyes and pH. These flocculants reduce the dye concentration by flocculation and settling. The grafted copolymer, Tam-g-PAM showed better results for dye removal. The optimal flocculant concentration, which was required to effect flocculation, was independent of dye concentration within the range examined. Both the flocculants performed better for removal of azo dyes than for reactive and basic dyes.