柱状装药预制破片缩比战斗部爆炸冲击波和破片的作用时序

针对柱状装药的周向预制破片战斗部,结合无量纲分析方法和爆炸驱动理论,确定了影响破片和冲击波相遇位置的关键参数,给出了由缩比战斗部推广预测原型战斗部爆炸产生的破片冲击波作用时序的方法。采用ANSYS/LS-DYNA有限元软件进行数值模拟,对比验证了理论分析和数值试验结果,分析了战斗部缩比比例对冲击波和破片作用时序的影响。结果表明:缩比模型与原型战斗部爆炸产生的破片和冲击波的相遇位置之比和相遇时间之比主要取决于两模型的质量比,在不考虑破片速度衰减时,两模型中载荷相遇位置之比和相遇时间之比等于其质量比的0.33次方。受破片速度衰减影响,该方法仅适用于质量缩比不小于0.2的模型。     

无绝缘高温超导双饼线圈的瞬态电热特性分析

无绝缘高温超导线圈具有良好的电热稳定性和机械紧凑性,但其充电过程中却有明显的磁场延迟现象。为详细了解无绝缘高温超导线圈励磁过程的瞬态特性,建立了无绝缘高温超导线圈的同轴圆环等效电路模型。通过绕制一个670匝的无绝缘高温超导双饼线圈,在液氮温度下进行不同充电速率的励磁实验,初步验证了等效电路模型的正确性。基于该模型,针对线圈励磁过程的充电和恒流阶段,仿真得到了线圈各匝的径向电流分布规律和电热损耗特性。     

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。     

攒尖四坡屋面风致雪漂移的数值模拟

为获得攒尖四坡屋面的风致雪漂移规律,基于欧拉-欧拉方法和风雪单向耦合假定,运用计算流体动力学软件,选取Mixture模型分别对立方体周边和高低屋面上的风致雪漂移运动进行数值模拟,将模拟结果与两者的实地观测数据对比,探讨分析数值风洞的关键技术和参数设置,验证数值模拟方法的合理性与可靠性。依据攒尖四坡房屋的使用功能要求,设计分析模型与分析工况,在试算的基础上对屋面进行分区。以风速5 m/s,7 m/s,9 m/s,11 m/s,13 m/s和15 m/s,风向角0°,15°,30°和45°以及屋面坡度25°,30°,34°,40°和45°为分析参数,对攒尖四坡房屋的120种工况进行数值模拟,得到屋面各分区侵蚀沉积的基本规律,提出可用于抗雪设计的屋面积雪分布系数。研究表明,风向角的改变会使屋面积雪分布状态发生较大程度的变化,风速和屋面坡度的变化对屋面整体积雪量有较大影响。     

超声共振法测定圆柱体材料弹性常数的影响因素分析

为明确超声共振频谱分析法(RUS)测定圆柱体试样弹性常数的影响因素, 由此针对各向同性圆柱体开展实验, 观察圆柱体试样测量结果的分散性和稳定性, 且主要研究横纵比和有效模态数量对测量结果的影响, 并与拉伸试验的结果进行比较. 以测量结果标准差、变异系数和95%置信度下均值的区间估计3个指标来衡量结果的稳定性和分散性, 且从模态简并角度对实验结果进行分析. 最终结果表明, 当超声共振频谱分析法的有效模态数量在17左右、试样横纵比接近1时, 测量结果的稳定性和分散性较小.     

明代生命损失型地震的时空分布特征及成因分析

利用史料记录建立了明代生命损失型地震的数据库,构建生命损失型地震等级序列、10 a尺度上生命损失型地震的频次序列和县次序列,再现明代生命损失型地震的时空分布特征,探讨了生命损失型地震发生及导致人口死亡的时空差异原因。结果表明：（1）从明初到明末,生命损失型地震等级强度有逐渐扩大的趋势。（2）明代前期处于生命损失型地震发生较少的稳定时期;明代中后期处于生命损失型地震发生较多的波动时期。明代生命损失型地震发生频次存在明显的周期性变化特征。（3）生命损失型地震在明代大部分区域皆有分布。灾害重心随时间变化发生移动,由西南到中部再到华北、华东。（4）明代地震频繁的原因除地球本身因素外,太阳活动通过影响气候变化,进而间接影响地壳活动。气候寒冷与干旱和地震有较好的对应关系。明代后期生命损失型地震导致死亡人数大量增加,与明代经济发展,人口密度逐渐增长有关;不同地区生命损失型地震导致的死亡人数不同,且死亡人数与地震频发地区是否处于板块之间的活动构造带和人口分布密度有关。     

时间尺度上二阶拟线性阻尼动力方程的振动性分析

研究二阶拟线性时滞阻尼动力方程[a(t)|x^Δ(t)|^λ-1x^Δ(t)]^Δ+b(t)|x^Δ(t)|^λ-1x^Δ(t)+p(t)|x(δ(t))|^λ-1x(δ(t))=0的振动性,其中t ₀∈T,而T为任意时间尺度,考虑方程是非正则情形,即$\int^{∞}_{t_0}$[a^-1(s)e_-b/a(s,t₀)]^1/λ Δs < ∞。 通过引入广义Riccati变换,借助时间尺度上的有关理论,并结合不等式技巧,建立了该方程振动的一些新的充分条件,推广、改进并丰富了现有文献中的结果。     

低喷淋密度超亲水表面水平管降液膜温度分布

水平管降液膜蒸发广泛应用在石油、化工、海水淡化等领域,对低喷淋密度温度演化规律的研究有助于拓宽其应用范围,理解其微观机理。本文在超亲水表面上结合红外热追踪技术,对水平管降液膜表面的温度演化规律进行了研究,分析了温度分区现象和温升规律。实验中首次发现了马鞍形液膜内部的高温环状结构,并结合三维数值模拟揭示了掺混作用导致的局部高温环状结构形成的内部机理。     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

Alfvén waves in temperature anisotropic Cairns distributed plasma

The dispersion relations and Landau damping of Alfven waves in kinetic and inertial limits are studied in temperature anisotropic Cairns distributed plasma.In the case of kinetic Alfven waves(KAWs),it is found that the real frequency is enhanced when either the electron perpendicular temperature or the non-thermal parameter A increases.For inertial Alfven waves(IAWs),the real frequency is slightly affected by the electron temperature anisotropy and A.Besides the real frequency,the damping rate of KAWs is reduced when the electron perpendicular temperature or A increases.In the case of IAWs,the temperature anisotropy and A either enhance or reduce the damping rate depending upon the perpendicular wavelength.These results may be helpful to understand the dynamics of KAWs and IAWs in space plasmas where the non-Maxwellian distribution of particles are routinely observed.