Darstellung,Kristallstrukturen und Schwingungsspektren neuer ternärer Verbindungen mit dem Anion [N–B–N]3–

Ternary Nitridoborates. 2. Synthesis, Crystal Structure, and Vibrational Spectra of New Ternary Compounds with the [N–B–N]^3– Anion The isotypic compounds LiM₄[BN₂]₃ (M = Ca, Sr, Ba, Eu) and NaM₄[BN₂]₃ (M = Sr, Ba) are formed as colorless to pale yellow prismatic crystals (black with Eu) by reaction of the binary components Li₃N, M₃N₂, EuN and Na, NaN₃, Ba₃N₂ and BN in sealed niobium ampoules at 1375 and 1275 K, respectively. The linear anions [N–B–N]^3– have bond lengths d(B–N) between 132.6 and 136.6 pm. Vibrational frequencies and force constants f(B–N) = 7.25–7.89 Ncm^–1 reveal significant drifts related to bond length and effective anionic charge. The cubic crystal structures (Im3m (No. 229), Z = 2; LiM₄[BN₂]₃: a(Ca) = 711.5 pm; a(Sr) = 745.6 pm; a(Eu) = 742.5 pm, a(Ba) = 788.0 pm and NaM₄[BN₂] ${}_{\text{3}\text{: a(Sr) = 756.8 pm; a(Ba) = 791.7 pm)) are stuffed derivatives of the β‐PtHg4}}$ structure type, and the range of existence of this cubic structure is derived from the molar volume and the ionic radii. The cations form a partial structure of centered cubes E1(E2)₈ which are condensed to a [E1(E2)_8/2] network (E1 = Li, Na; E2 = Ca, Sr, Ba, Eu). The remaining open cubes are filled by the [BN₂]^3– anions yielding two interpenetrating [E1(BN₂)_6/2] networks. Periodic Nodal Surfaces (PNS) of Im3m symmetry show the regions of different interactions.     

在活性炭孔隙中形成微粉粒子

在活性炭孔隙中形成微粉粒子赵振国，程虎民，马季铭，齐利民（北京大学物理化学研究所，北京，１００８７１）关键词ＰｂＴｉＯ_３，活性炭，微粉粒子制备近年来，在泡沸石的均匀孔介质中形成ＣｄＳ和ＰｂＳ簇已有报道［１，２］。但在沸石笼中形成超微粒子受到一定的限?..     

CO和NO在CuO及Cu2O(110)表面吸附选择规律研究

采用离散变分Xα方法分别计算了CO和NO以C（或N）端顶位吸附在CuO（110）及Cu2O（110）表面上的基态势能曲线,结果表明：CO在Cu2O表面上的吸附强,而在CuO表面上的吸附弱;NO则在CuO表面上吸附强,在Cu2O表面上吸附弱．它们的吸附能的大小顺序为：CuO－NO＞Cu2O－CO＞Cu2O－NO＞CuO－CO．对于CuO－NO（或CO）吸附体系,主要是Cu的3d轨道与吸附分子的2π轨道间的相互作用;对于Cu2O－CO（或NO）吸附体系,则主要是吸附质分子的5σ及2π分子轨道与其顶位Cu1的4s及4p轨道和侧位Cu2的3d轨道相互作用．本文通过吸附势能曲线、态密度分析、成键分析及电荷转移量和方向等方面对实验现象做了合理的解释．     

The study of organic semiconductor/ferromagnet interfaces in organic spintronics: A short review of recent progress

An overview is given on recent results in organic spintronic research. In particular, so‐called spinterfaces, spin‐injecting interfaces involving organic semiconductor (OSC) molecules and ferromagnetic metals, are discussed. The interfaces are classified in different categories depending on the type and strength of interface interaction and the relevant physics concerning energy level alignment and spin polarization of interface states are explained. Examples are given on characterization of both interface energetics and spin‐related properties obtained from a wide variety of experimental techniques, highlighting the different ways contacting can modify the electronic and magnetic properties of the OSC molecules and the ferromagnetic metals at the resulting spinterfaces. Finally, models for spin injection at spinterfaces are presented and discussed, followed by some speculations on consequences for device design and performance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

PDMS network blends of amphiphilic acrylic copolymers with poly(ethylene glycol)‐fluoroalkyl side chains for fouling‐release coatings. I. Chemistry and stability of the film surface

Amphiphilic copolymers of a methacrylic monomer (SiMA) carrying a polysiloxane side chain and an acrylic monomer (ZA) with a mixed poly(ethylene glycol) (PEG)‐fluoroalkyl side chain (10–85 mol % ZA) were incorporated as the surface‐active components into poly(dimethylsiloxane) (PDMS) network blends at different loadings (1 and 4 wt % with respect to PDMS). Wettability of the coating surfaces was investigated by contact angle measurements, and their surface chemical composition was determined by angle‐resolved X‐ray photoelectron spectroscopy. It was found that the surface segregation of the fluoroalkyl segments of the amphiphilic copolymers was responsible for the high enrichment in fluorine concentration within 10 nm of the coating surface. The PEG segments were also concentrated at the polymer?air interface. The chemical composition of the films was proven to be relatively little affected by immersion in water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Functional micropatterned surfaces prepared by simultaneous UV‐lithography and surface segregation of fluorinated copolymers

A new procedure focused on the design and preparation of structured and functional polymer surfaces by combination of two approaches acting simultaneously is developed. The elaboration of micrometer size patterned surfaces by UV‐light lithography is reported where, in addition, the surface chemical composition can be controlled by surface segregation of a fluorinated copolymer incorporated in the photopolymerizable mixture. As evidenced by contact angle and XPS measurements, the surface composition can be modified depending on such factors as with the environmental conditions or the concentration of copolymer in the blend. Moreover, the functionality of the copolymer is enhanced by the surface pattern created. As a consequence, the wettability of the films can be modified depending on the pattern and composition of the blend. By using this methodology, functional adaptive sensitive surfaces with a well‐defined topography will be obtained in one single step and without the use of tedious and time‐consuming multistep procedures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Reversible Wettability of Tungsten Trioxide Films with Novel Dandelion‐like Structures

Tungsten trioxide (WO₃) films with novel dandelion‐like structures were prepared by spin‐coating a sol of WO₃ with CTAB (cetyltrimethyl ammonium bromides) on quartz substrates. The resultant WO₃ films were characterized by X‐ray diffraction (XRD), FT‐IR spectroscopy, scanning electron microscopy (SEM), and X‐ray photoelectron spectroscopy (XPS). The wettabilities of the WO₃ films were evaluated by contact angle (CA) measurements. It was found that the WO₃ film exhibited superhydrophilicity under UV light irradiation, whereas after storage in the dark for a certain time, it turned to be superhydrophobic.     

Assembling hyperbranched polymerics

A condensed overview discusses the existing grafting approaches and the surface behavior of various hyperbranched polymers. We focus on the recent strategies and corresponding characterization of the resulting surface morphologies and structures with a number of relevant recent results from the authors' own research and existing literature. Some results discussed here are important for prospective applications of hyperbranched polymers in biomedical fields, for resistive coatings, tough blends, and reinforced nanocomposites are briefly summarized as well. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 83–100, 2012     

Functionalized block copolymers for preparation of reactive self‐assembled surface patterns

Two phase separating block copolymers equipped with functional groups (acid and alkyne) were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization. Thin films of these materials were prepared and examined with regard to surface morphology, surface composition, and film stability. Self‐assembled structures with domain sizes of about 40 nm were detected through atomik force microscopy (AFM) analysis while X‐ray photoelectron spectroscopy measurements revealed a balanced surface exposure of the two segregated phases. Thus, reactive groups being present in both phases are specifically provided within nanoscopic surface areas. The films showed good stability on exposure to various solvents but the self‐organized surface patterns were only resistant toward ethanol. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011