Photoluminescence and optical absorption properties of silicon quantum dots embedded in Si-rich silicon nitride matrices

Silicon nitride (SiN_x) films were prepared with a gas mixture of SiH₄ and NH₃ on Si wafers using the plasma-enhanced chemical vapor deposition (PECVD) method. High-resolution transmission electron microscopy and infrared absorption have been used to reveal the existence of the Si quantum dots (Si QDs) and to determine the chemical composition of the silicon nitride layers. The optical properties of these structures were studied by photoluminescence (PL) spectroscopy and indicate that emission mechanisms are dominated by confined excitons within Si QDs. The peak position of PL could be controlled in the wavelength range from 1.5 to 2.2 eV by adjusting the flow rates of ammonia and silane gases. Absorbance spectra obtained in the transmission mode reveal optical absorption from Si QDs, which is in good correlation with PL properties. These results have implications for future nanomaterial deposition controlling and device applications.     

ArF laser surface modification of polyethersulfone film: Effect of laser fluence in improving surface biocompatibility

ArF laser treatment of polyethersulfone (PES) films was performed to improve biocompatibility of surfaces. For this purpose, the threshold fluence for laser ablation of PES was obtained from experimental measurements and then samples were irradiated at 2 separate ranges of fluences, i.e. below and above the ablation threshold. In order to investigate the physico-chemical changes, the modified surfaces were characterized by attenuated total reflectance (ATR) infrared spectroscopy and contact-angle measurements. The biocompatibility of the treated samples in comparison to those untreated was examined in vitro using a platelet adhesion test. The number of adhered platelets was obtained using the lactate dehydrogenase (LDH) method. For surfaces irradiated below the ablation threshold, a high reduction in the number of the adhered platelets was observed; while this number increased in samples treated at the fluence above the ablation threshold. The change in platelet adhesion was attributed to the change in chemistry and roughness of the irradiated surfaces.     

Characterization of patterns in rimming flow

Patterns were generated inside a horizontal cylinder rotating at low speeds. The cylinder was filled with a very low volume liquid fraction of 1.8% of Newtonian fluid and the rotation speed ranged between 0.08 and 5.2 s⁻¹. A novel laser-plane technique was utilized to obtain time series from each pattern. This enabled the characterization of fluid patterns using Fourier spectral (FS) and dynamical-systems (chaotic) techniques such as the recurrence map, correlation dimension (D₂) and Hurst exponent (H). Four patterns were found (fingers, furrows, waterfall and smooth tooth) before annular flow was reached. The results indicate that the FS technique not is suitable for flow pattern characterization; and H only has the ability to indicate a possible pattern change. The best tool for indicating the pattern transitions and the inner coat liquid evolution was found to be recurrence maps and D₂.     

Probing mechanical properties of thin film and ceramic materials in micro- and nano-scale using indentation techniques

In this study, we report on the mechanical properties, failure and fracture modes in two cases of engineering materials; that is transparent silicon oxide thin films onto poly(ethylene terephthalate) (PET) membranes and glass-ceramic materials. The first system was studied by the quazi-static indentation technique at the nano-scale and the second by the static indentation technique at the micro-scale. Nanocomposite laminates of silicon oxide thin films onto PET were found to sustain higher scratch induced stresses and were effective as protective coating material for PET membranes. Glass-ceramic materials with separated crystallites of different morphologies sustained a mixed crack propagation pattern in brittle fracture mode.     

Investigation on cell biocompatible behaviors of polyaniline film fabricated via electroless surface polymerization

Considering for the potential application in tissue engineering, polyaniline (PANi) film was fabricated via a two-step route: a self-assembled monolayer of C₆H₅NHC₃H₆Si(OMe)₃ was firstly formed on the single-crystal Si substrate; the conducting PANi film was then prepared through electroless surface polymerization of the aniline molecules on the aniline monolayer-bearing silane surface in an acidic aqueous solution. The formation of PANi film on Si surface was confirmed by characterizations of X-ray photoelectron spectroscope (XPS) and specular reflectance Fourier transform infrared (SR-FTIR) spectrum, etc. At last, the proliferation behaviors of PC-12 cells on the PANi film surface were studied by the [3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide] (MTT) colorimetric assays, acridine orange fluorometric staining, and scanning electron microscope (SEM) observation, etc. The results demonstrate that the as-prepared PANi film provides high ability for cell proliferation, exhibiting promising potentials as surface coating to cultivate neuronal cells for applications in the tissue engineering.     

Regular conjugated terpolymers comprising two different acceptors and bithiophene donor in repeating group: Effect of strong and weak acceptors on semiconducting properties

Diketopyrrolopyrrole (DPP)‐based terpolymers—P(DPP‐TPyT) and P(DPP‐T3MTT)—bearing bithiophene donating groups and weak accepting units such as pyridine (Py) or methyl thiophene‐3‐carboxylate (3MT), in the polymer backbone, were successfully synthesized. Although the two polymers had similar physical and electrochemical properties, grazing incidence X‐ray diffraction patterns of P(DPP‐TPyT) and P(DPP‐T3MTT) showed mixed and edge‐on orientations, respectively, in thermally annealed films. Accordingly, the P(DPP‐T3MTT) showed twice the hole mobility of P(DPP‐TPyT) in a thin‐film transistor, and a blended film of P(DPP‐T3MTT) and [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC₇₁BM) showed better power conversion efficiency in a polymer solar cell. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1339‐1347     

Effect of denaturation of DNA on the molecular organization of a fluorescent dye in ultra thin films

Acridine Orange (AO) forms H-dimer in solid state and in ultra thin films. However, H dimer of AO reduces its efficiency as a usefull material for fluorescence probe. In the present work detailed investigations has been done on the interaction of AO with different forms of DNA in order to check the effectiveness in controlling the dimeric sites of AO in the Layer by Layer (LbL) self assembled film. It was found that single stranded DNA (ssDNA) is most effective than the dsDNA and coil-shaped DNA in controlling the dimeric sites of AO in LbL film.     

A fluorine-contained copolymer ultra-thin film: Stability and electrochemical corrosion behavior

A novel fluorine-contained random copolymer (2,3,4,5,6-pentafluorostyrene)-r-poly(4-vinyl benzocyclobutene) (P(PFSt-r-4-VBCB)) was synthesized, and then spin-coated onto Si substrates followed by thermal cross-linking to produce the copolymer ultra-thin films. Although the surface modification with the P(PFSt-r-4-VBCB) film was simple and did not rely on special surface chemical reactions, the film could decrease the surface energy significantly, more importantly; the film demonstrated excellent stability and corrosion resistance. This random copolymer film could find broad applications in modifying various solid surfaces to enhance the properties such as corrosion resistance and solvent resistance.