求解层间界面反平面剪切破坏的剪切梁模型(Ⅰ)——基本特性

在反平面剪切载荷及侧压力共同作用下引起的裂纹及裂纹扩展导致的层间界面失效,是岩土工程层间界面及砌体结构中界面层上典型的失效方式.运用弹性力学和断裂力学的理论原理,提出了能够反映上述层间界面断裂失效问题力学特性的剪切梁模型.文中采用具有应力软化特性的“粘性裂纹”(内聚力裂纹)模型来表述层间裂纹前方损伤过程区的本构行为.对通过粘性层结合在一起的两个弹性板,在反平面剪切载荷及侧压力共同作用下的力学行为作了解析分析计算,研究了层间界面裂纹扩展规律.     

功率MOSFET的负偏置温度不稳定性效应中的平衡现象

通过对功率金属氧化物半导体场效应晶体管在静态应力下的负偏置温度不稳定性的实验研究, 发现器件参数的退化随时间的关系遵循反应扩散模型所描述的幂函数关系, 并且在不同栅压应力下, 实验结果中均可观察到平台阶段的出现. 基于反应扩散理论的模型进行了仿真研究, 通过仿真结果分析和验证了此平台阶段对应于反应平衡阶段, 并且解释了栅压应力导致平台阶段持续时间不同的原因. 关键词： 功率金属氧化物半导体场效应晶体管 负偏置温度不稳定性 反应扩散模型     

Influence of the tangential velocity on the compressible Kelvin−Helmholtz instability with nonequilibrium effects

Kelvin−Helmholtz (KH) instability is a fundamental fluid instability that widely exists in nature and engineering. To better understand the dynamic process of the KH instability, the influence of the tangential velocity on the compressible KH instability is investigated by using the discrete Boltzmann method based on the nonequilibrium statistical physics. Both hydrodynamic and thermodynamic nonequilibrium (TNE) effects are probed and analyzed. It is found that, on the whole, the global density gradients, the TNE strength and area firstly increase and decrease afterwards. Both the global density gradient and heat flux intensity in the vertical direction are almost constant in the initial stage before a vortex forms. Moreover, with the increase of the tangential velocity, the KH instability evolves faster, hence the global density gradients, the TNE strength and area increase in the initial stage and achieve their peak earlier, and their maxima are higher for a larger tangential velocity. Physically, there are several competitive mechanisms in the evolution of the KH instability. (i) The physical gradients increase and the TNE effects are strengthened as the interface is elongated. The local physical gradients decrease and the local TNE intensity is weakened on account of the dissipation and/or diffusion. (ii) The global heat flux intensity is promoted when the physical gradients increase. As the contact area expands, the heat exchange is enhanced and the global heat flux intensity increases. (iii) The global TNE intensity reduces with the decreasing of physical gradients and increase with the increasing of TNE area. (iv) The nonequilibrium area increases as the fluid interface is elongated and is widened because of the dissipation and/or diffusion.     

��������ѹǿ��Line-tiedŤ�����ȶ��������ʺͱ���������Ӱ��

应用半解析方法,研究了直圆柱位形下等离子体压强P0分别为P0=0、P0=常数和P0=f(r)时Line-tied扭曲不稳定性的增长率和二维径向本征函数的演化规律。结果表明,P0=0和P0=常数时的轴向波数k的范围相同,但P0=常数时的增长率比P0=0时的小。P0=f(r)时的轴向波数k的范围和增长率则都比P0=0时的大,同时磁流体的速度变化也较大。因此,P0=f(r)更接近实际的物理模型(例如日冕的喷射问题)。     

Surface Tension Effect on Harmonics of Rayleigh-Taylor Instability

Using the method of the parameter expansion up to the third order, explicitly investigates surface tension effect on harmonics at weakly nonlinear stage in Rayleigh-Taylor instability (RTI) for arbitrary Atwood numbers and compares the results with those of classical RTI within the framework of the third-order weakly nonlinear theory. It is found that surface tension strongly reduces the linear growth rate of time, resulting in mild growth of the amplitude of the fundamental mode, and changes amplitudes of the second and third harmonics, as is expressed as a tension factor coupling in amplitudes of the harmonics. On the one hand, surface tension can either decrease or increase the space amplitude; on the other hand, surface tension can also change their phases for some conditions which are explicitly determined.     

THEORY OF DIELECTRIC ELASTOMERS

In response to a stimulus, a soft material deforms, and the deformation provides a function. We call such a material a soft active material （SAM）. This review focuses on one class of soft active materials： dielectric elastomers. When a membrane of a dielectric elastomer is subject to a voltage through its thickness, the membrane reduces thickness and expands area, possibly straining over 100%. The dielectric elastomers are being developed as transducers for broad applications, including soft robots, adaptive optics, Braille displays, and electric generators. This paper reviews the theory of dielectric elastomers, developed within continuum mechanics and thermodynamics, and motivated by molecular pictures and empirical observations. The theory couples large deformation and electric potential, and describes nonlinear and nonequilibrium behavior, such as electromechanical instability and viscoelasticity. The theory enables the finite element method to simulate transducers of realistic configurations, predicts the efficiency of electromechanical energy conversion, and suggests alternative routes to achieve giant voltage-induced deformation. It is hoped that the theory will aid in the creation of materials and devices.     

Numerical modeling of slug flow initiation in a horizontal channels using a two-fluid model

This paper presents a methodology for modeling slug initiation and growth in horizontal ducts. Transient two-fluid equations are solved numerically using a class of high-resolution shock capturing methods. The advantage of this method is that slug formation and growth in a stratified regime can be calculated directly from the solutions to the flow field differential equations. In addition, by using high-resolution shock capturing methods that do not contain numerical diffusion, the discontinuity generated by slugging in the flow field can be modeled with good accuracy. The two-fluid model is shown to be well-posed mathematically only under certain conditions. Under these circumstances, the two-fluid model is capable of correctly predicting and modeling the flow physics. When ill-posed, an unbounded instability occurs in the flow field solution, and the instability amplitude increases exponentially with decreasing mesh sizes. This work shows that there are three zones associated with slug formation. In addition, long wavelength slugs are shown to initiate from short wavelength waves. These short waves are generated at the interface of the two phases by the Kelvin-Helmholtz hydrodynamic instability. The results obtained through numerical modeling show good agreement with experimental results.     

色散磁导率对异向介质中的调制不稳定性的影响

基于Drude模型研究了异向介质的色散磁导率对调制不稳定性的影响. 结果表明，在反常色散情形，赝五阶非线性在异向介质的负折射区中增大了调制频谱的范围及增益值，这与常规正折射介质中出现的现象正好相反；自陡峭效应在异向介质中有可能为负值，但无论正负，也无论在正折射区还是负折射区，它都抑制调制不稳定性的产生；二阶非线性色散效应在正、负折射区中分别促进和抑制调制不稳定性的产生. 在正常色散情形，由于二阶非线性色散效应的作用，使本来在常规正折射介质中不可能出现的调制不稳定性现象也能出现，这一特性为在正常色散区形成孤     

LOM and HOM damping study in a superconducting deflecting cavity for ALS at LBNL

Superconducting deflecting cavities can be used in synchrotron light source to generate subpicosecond X-ray pulses while the impedance of the lower order modes (LOM) and higher order modes (HOM) in the cavity should be kept below an accepted level to avoid beam instability. These modes can be damped by adding waveguide on beam pipe. Detailed simulation of Q in CST Microwave Studio is introduced and experiment results on an aluminum model cavity with damping waveguide are reported to make a comparison.