Dynamics of chelation-supercritical fluid extraction from wood fibers

The dynamics of supercritical fluid extraction (SFE) of the metal content of wood fibers chelated with lithium bis(trifluoroethyl) dithiocarbamate (FDDC) by supercritical (SF) CO2 was investigated experimentally by monitoring the spectra of the eluted metal complex as a function of time. The characteristic shape of the dynamic SFE curve was determined mainly by the flow conditions in the extraction vessel, the mass transfer resistance in the SF phase, and the solubility. High extraction yields of metal content were obtained in two-stage extraction including static (batch) and dynamic (semi-batch) stages. Increasing the length of the static stage increased the rate of dynamic elution of metal complex until it approached the dynamics of fluid displacement for a continuous stirred tank reactor (CSTR). In such cases, increasing the flow rate had no effect on the dynamic extraction curve when it was plotted using dimensionless time. Efficient chelation-SFE from wood fibers was obtained at a pressure of 20.3 MPa and with a static time of 30 min.     

Adsorption of octadecyltrimethylammonium chloride and adsolubilization on to cellulosic fibers

The coadsorption of different organic solutes on cellulosic fibers treated with octadecyltrimethylammonium chloride (ODTMA) has been studied. In the absence of ODTMA cellulosic fibers had little tendency to retain organic compounds. The enhanced solute incorporation was ascribed to the adsolubilization of these compounds on the aggregated domains of the adsorbed surfactant molecules at the solid/liquid interface. The specific shape of solute coadsorption isotherms indicated that the adsolubilization process may be regarded as a partition phenomenon between the aqueous bulk phase and the adsorbed surfactant aggregates. The decrease in solute uptake at the cellulose/water interface above the CMC of ODTMA was ascribed to micelle formation in the bulk solution and to the ensuing micellar solubilization of organic solutes. Preliminary experiments performed using vertical fixed bed columns showed that modified cellulosic fibers can be conveniently used as substrate for treating organic pollutants.     

Effects of End-Face Tilt Angle on Numerical Aperture for Straight and Bent Plastic Optical Fibers

Numerical aperture (NA) is an important parameter of optical fibers. The larger it is, the greater the amount of light input into the fiber and, hence, the greater the achievable transmission distance. In this article, analytical functions are given for numerical aperture of an angle-ended plastic optical fiber in terms of the tilt angle of its input/output face. This tilt may be intentional, as in biomedical spectroscopic sensors, or otherwise when exploiting the quick interconnectivity potential of plastic fibers. The influence of fiber curvature on its numerical aperture has also been quantified as the functions given cover both straight and curved fiber configurations.     

Phase-matched third-harmonic UV generation using low-order modes in a glass micro-fiber

We observe phase-matched third-harmonic generation at 355 nm in a low-order mode of a sub-micron diameter glass fiber. The third-harmonic signal exhibits a sharp resonance for a fiber diameter d = 0.49 ± 0.02 μm, in excellent agreement with the value d = 0.506 μm predicted by theory. The third-harmonic conversion efficiency is 2 × 10⁻⁶, and is limited by the pump power (1 kW) and effective fiber length (100 μm).     

Theoretical and experimental study of differential group delay and polarization dependent loss of Bragg gratings written in birefringent fiber

In this paper, we completely study the wavelength dependency of differential group delay (DGD) and polarization dependent loss (PDL) for Bragg gratings written in birefringent fibers. Based on the coupled mode theory, we present analytical expressions for the evolution with wavelength of the transmission coefficient, the DGD and the PDL. The wavelength dependencies of these evolutions on the birefringence are then discussed. Experimental results are finally presented for an apodized FBG written in a bow-tie fiber. A very good agreement between theory and experience is reported, confirming the validity of the theoretical analysis.     

Higher-order Gabitov–Turitsyn equation for solitons in optical fibers

The higher-order multiple-scale asymptotic analysis is carried out for the Gabitov–Turitsyn equation that governs the propagation of dispersion-managed solitons through optical fibers. The averaged equation, with the consideration of higher-order terms, provides an in-depth understanding of the soliton propagation through an optical fiber. The polarization preserving fibers as well as birefringent fibers are considered in this paper. Finally, the study is extended to the case of multiple channels, namely dispersion-flattened fibers.     

Atmospheric plasma treatment of pre‐electrospinning polymer solution: A feasible method to improve electrospinnability

The electrospinnability of polyethylene oxide (PEO) was manipulated by atmospheric plasma treatment of pre‐electrospinning solutions. Conductivity, viscosity, and surface tension of PEO solutions increased after plasma treatment, and the plasma effect remained longer when the solution concentrate increased. Both untreated and treated solutions were then electrospun, and the morphology of the resultant nanofibers was observed by SEM. Atmospheric plasma treatment improved the electrospinnability of PEO solutions and led to less beads and finer diameter distribution in the resultant nanofibers. Additionally, plasma treatment of the pre‐electrospinning solutions affected the crystal structure of resultant nanofibers. These results suggest that atmospheric plasma treatment is a feasible approach to improve the electrospinnability of polymer solutions and can used to control the structure of electrospun nanofibers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Influence of humidity cycling parameters on the moisture‐accelerated creep of polymeric fibers

Accelerated creep is a curious and poorly understood transient moisture effect. The creep rates of most hydrophilic materials increase greatly with moisture content. However, when these same materials are subjected to creep loads in cyclic humidity environments, they often exhibit much higher creep rates than in a constantly humid state. This is called accelerated creep. Previous experimenters reported that accelerated creep was less likely to occur in polymeric fibers. We demonstrate experimentally that this happened only because of their choice of humidity cycling parameters. New results are given for Kevlar, lyocell, nylon‐6,6, and ramie fibers. Other paper scientists have argued that the absence of accelerated creep in single fibers supports a explanation based on fiber network effects for accelerated creep in paper. We argue here that accelerated creep is a more general phenomenon consistent with sorption‐induced stress‐gradient explanations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2048–2062, 2001     

等效电流方法计算单模光纤的辐射损耗

本文将无源的不规则波导看作有源的理想波导,求等效极化电流电场,直接得到单一光波导模间耦合和辐射损耗问题的解。用这个方法计算了阶跃单模光纤折射率轴向不均匀变化的损耗。这种方法完全脱离了耦合波的概念,它不但物理意义明确,而且求解问题的方法简洁。最后以单模光纤弯曲和微弯损耗为例,说明等效电流方法还适用于广义耦合波理论才能求解的问题。     

Resilient collapse of thermal sensitive polymer on the surface of the optical fiber taper

In this work, collapse of poly(N‐isopropyl‐acrylamide) (pNIPAM) grafted on the surface of the optical fiber taper is probed by measuring fluorescence of rhodamine B solution at various temperatures. It is observed that the fluorescence intensity through the taper shows a nonlinear response to temperature. According to the optical model for the special designed taper, it is realized that the nonlinear response results from changing in effective refractive index of interfacial layer between taper and solution. Analysis on relationship between signal change and collapse process reveals a springback process during the collapse of pNIPAM chains. Such a novel phenomenon is further investigated on method for fluorescence measurement and molecular weight of the polymer. These results have not only revealed details of the collapse, but also establish a novel technique for study the collapse of thermal sensitive polymers on the surface. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 778–785