一种自校准光纤珐珀动态应变检测系统的实验研究

针对工程中光纤珐珀传感器的工作点容易偏离线性工作区而使解调系统无法正常工作的实际问题,设计了一种可实现自动校准工作点的动态应变检测系统。该系统利用数字信号处理器控制可调珐珀滤波器自动输出波长满足工作点要求的窄带光,同时还通过软件校准的办法消除了因光源的不稳定、系统老化等缓变因素引起的信号波动对测量结果的影响。实验结果表明该动态应变检测系统能完成工作点自动校准,并且在500με范围内线性度可达99．79％,实验分辨率约为±0．5με。     

Hollow-fiber flow/hyperlayer field-flow fractionation for the size characterization of airborne particle fractions obtained by SPLITT fractionation

Hollow-fiber flow field-flow fractionation (HF FlFFF) was applied for the separation and size characterization of airborne particles which were collected in a municipal area and prefractionated into four different-diameter intervals >5.0, 2.5-5.0, 1.5-2.5, <1.5 microm) by continuous split-flow thin (SPLIIT) fractionation. Experiments demonstrated the possibility of utilizing a hollow-fiber module for the high-performance separation of supramicron-sized airborne particles at steric/hyperlayer operating mode of HF FlFFF. Eluting particles during HF FlFFF separation were collected at short time intervals (approximately 10 s) for the microscopic examination. It showed that particle size and size distributions of all SPLITT fractions of airborne particles can be readily obtained using a calibration and that HF FlFFF can be utilized for the size confirmation of the sorted particle fraction during SPLITT fractionation.     

Rapid separation of strychnine and brucine on a dynamically modified poly(dimethylsiloxane) microchip followed by electrochemical detection

A method has been developed for rapidly separating and detecting strychnine and brucine using a poly(dimethysiloxane) (PDMS) microchip and electrochemical (EC) detection. PDMS microchannels dynamically modified by Brij35 are shown to be more efficient than native ones. The two analytes are well separated within 90 s in 70 mmol/L acetate buffer (pH 5.5) containing 0.01% (v/v) Brij35. Detection limits were found to be 1.0 μmol/L for strychnine and 0.2 μmol/L for brucine at S/N=3. The method was used to determine trace strychnine and brucine in rat serum, and the results obtained correlate well with those obtained via high-performance liquid chromatography (HPLC).      

Solving Non-Isospectral mKdV Equation and Sine-Gordon Equation Hierarchies with Self-Consistent Sources via Inverse Scattering Transform

N-soliton solutions of the hierarchy of non-isospectral mKdV equation with self-consistent sources and the hierarchy of non-isospectral sine-Gordon equation with self-consistent sources are obtained via the inverse scattering transform.     

Controlling Entanglement Dynamics by Choosing Appropriate Ratio between Cavity-Fiber Coupling and Atom-Cavity Coupling

The entanglement characteristics including the so-called sudden death effect between two identical twolevel atoms trapped in two separate cavities connected by an optical fiber are studied. The results show that the time evolution of entanglement is sensitive not only to the degree of entanglement of the initial state but also to the ratio between cavity-fiber coupling （v） and atom-cavity coupling （g）. This means that the entanglement dynamics can be controlled by choosing specific v and ft.     

Experimental and theoretical studies on a double-pass C-band bismuth-based erbium-doped fiber amplifier

Performance of a Bismuth-based Erbium-doped fiber amplifier is experimentally and theoretically investigated using 1480 nm pumping with double-pass scheme. In the theoretical analysis, the rate and power propagation equations are solved to examine the optimum length for the C-band operation as well as the gain and noise figure characteristics. The calculated small signal gain is 38 dB with gain variation of less than 3 dB. The measured gain is 4 dB lower due to spurious reflections which were ignored in the theoretical analysis. At input signal power of 0 dBm, a gain of 14.5 dB is obtained experimentally with gain variation of less than 1 dB within the wavelength region from 1530 to 1565 nm. The noise figure is less than 12 dB within this region.     

Efficient dispersion tailoring by designing alternately arranged dispersion compensating fibers and fiber amplifiers to create self-similar parabolic pulses

The parabolic similariton pulse formation by alternate arrangements of passive and active dispersion compensating fibers (DCFs) is presented here. These combinations of passive and active DCFs with constant core radii and constant nonlinearities are suggested as equivalent profiles of a dispersion tailored fiber amplifier in normal dispersion regime. The dispersion tailored fibers, usually known as dispersion decreasing fibers (DDFs) in normal dispersion regime, are capable of producing linearly chirped parabolic self-similar pulses. The DDF is designed and optimized with proper choice of fiber parameters so that considerable variation of nonlinearity can be achieved, which in turn enhances the effective gain coefficient of the fiber. Inclusion of this nonlinear variation along the DDF amplifier length leads to obtain the simulated output pulses with very small misfit parameters with respect to perfect parabolic pulse at sufficiently reduced optimum length. At the same time to avoid the fabrication difficulties of the DDF, the alternately arranged passive and active DCFs are suggested as suitable alternatives of the DDF. The performances of the cascaded systems for generation of self-similar parabolic pulses are compared with that of the DDF amplifier as well as combined systems consisting of DCFs with equal gain. The results show that the proposed alternately arranged cascaded system with less pumping requirements, are efficient enough to produce similar parabolic pulses as compared to the previously designed DDF, even when considerable amount of splice loss at each joint is included.     

Optimization of erbium-doped fiber MOPA laser

An erbium-doped fiber laser (EDFL) constructed in a master oscillator and power amplifier (MOPA) configuration is analyzed. The pump powers for the fiber cavity laser and the booster amplifier stages are managed properly to achieve maximal pump conversion efficiency. Our design achieves a pump conversion efficiency of 91.4%, corresponding to a quantum efficiency of 96.6%, for a 1565.8 nm MOPA laser pumped by a total power of 300 mW at 1480 nm. The optimized MOPA laser shows a 25% enhancement in the pump conversion efficiency, compared to a non-MOPA fiber laser. A side lobe suppression ratio of 48 dB for the optimized MOPA laser is observed.     

Optical wavelet de-noising applied in multi-span nonlinear fiber links

In this work, optical wavelet de-noising with several different types of wavelets such as db4, coif4 and dmey wavelet was applied at the end of the 40 Gbit/s multi-span intensity-modulated fiber communication systems. The results of numerical simulations carried out in different fiber links demonstrated that the optical wavelet de-noising method could remove the random amplitude fluctuation induced by the interaction of EDFA’s ASE noise and optical fiber’s dispersion and nonlinearity. The SNR and BER curves of the optical bit sequence without and with optical wavelet de-noising in dispersion compensation fiber link were plotted to show the effectiveness of the wavelet de-noising in the fiber-optic communication systems and wavelet de-noising with demy wavelet can achieve better result than with other type wavelet.     

Mitigation of phase noise in dispersion compensated quasi-linear optical transmission systems: Analysis

We theoretically investigate the phase noise in quasi-linear optical transmission systems and study the mitigation of phase noise by properly choosing periodic dispersion compensation and amplification. Variational method is used to deduce the analytical formula for calculating the phase fluctuations of a Gaussian pulse. The analytical predictions are then checked against direct simulations by numerically solving the nonlinear Schrödinger equation. We find that stronger dispersion compensation maps can be used to reduce phase noise and it can be further mitigated by modifying the dispersion map appropriately. It is also found that shorter amplifier spacing yields lower phase noise. We also explore the effect of pre-, post- and bi-end dispersion compensation configurations on phase noise with full compensation and check the reduction of phase noise along the fiber link.