Implementation of the Laser Diffraction Technique for Acoustic Cavitation Bubble Investigations

Knowledge of the acoustic cavitation cloud would be useful for improving ultrasound reactor design. Among the characterisation techniques, few are adapted to bubble investigations in an intense ultrasound field. Some problems raised by these measurements result from interactions between the acoustic pressure wave and the measuring light wave. This paper reports the implementation of the laser diffraction technique to determine the size and volume concentration of bubbles generated by a dipping horn operating at 20 kHz. Measurements were performed with a Malvern 2600 instrument. The size distribution, deduced from the diffraction pattern scattered by the bubble cloud crossed by a laser beam, is disturbed by the acoustic pressure wave involving deviation of a light beam at low diffusion angles (acousto‐optic effect). A bubble size correction procedure based on the subtraction of the light energy due to the ultrasound wave is described. The size measurements, and thus the correction procedure, were validated by a second laser technique based on a different measuring principle: phase Doppler interferometry. The measurement reliability was further confirmed by an original application of laser diffraction based on measurements performed just after sonication. These three methods lead to a mean bubble size (Sauter mean diameter) of about 10 μm at a high ultrasound power input. Concerning the void fraction, only measurements achieved after sonication and by laser diffraction predict a correct estimation of this parameter.     

基于高速肖特基二极管的100 ps瞬态取样门设计与仿真

 皮秒级瞬态取样门主要应用于激光聚变实验和高能物理实验中,对单次高速脉冲进行实时取样。提出了一种新颖的基于肖特基二极管桥的平衡取样门,给出其模型和具体电路设计。电路仿真结果表明,对称的选通设计保证了选通脉宽为100 ps时,取样间隔也为100 ps,取样门带宽为4.4 GHz,可应用于多路超短激光脉冲取样。     

基于激光器激射特性的新型应变传感系统

报道了一种基于掺铒光纤激光器瞬态特性的新型应变传感系统.用光纤环反射镜和光纤Bragg光栅(FBG)构成Fabry-Perot线型腔.腔内插入一个长周期光纤光栅(LPG)，其透射谱的中心波长为1574.4nm.FBG的带宽为0.23nm，不受力时其反射波长为1557.98nm，位于LPG的透射谱左沿；当FBG受力时激射波长向长波方向移动，激光通过LPG时透射损耗增大，腔损耗的增加将使激光激射延迟时间增加.因此，应变的大小可以通过激光产生的延迟时间来测量.这种新型应变传感器的分辨率和灵敏度由抽运光脉冲的高、 关键词： 应变传感 光纤激光器 时域测量 光纤Bragg光栅     

Paul阱中共面两离子系统的能量本征态

通过对Paul阱中共面两离子体系的研究，考虑共面两离子在Paul阱中库仑关联，得到了两离子系统Schrdinger方程的精确解；椐方程的精确解，分析了质心能级简并情况，计算了两离子的平衡距离和低能级的几个态函数，设计程序作出了质心径向概率分布图. 关键词： Paul阱 两离子 共面 量子逻辑操作     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

MOSFET调制器的实验研究

 介绍了MOSFET调制器的基本原理,并对其并联分流和感应叠加两种开关结构进行了实验研究。基于可编辑逻辑器件设计了其触发电路,驱动电路采用高速MOSFET对管组成的推挽输出形式,加快了MOSFET的开关速度。利用Pspice软件对开关上有无剩余电流电路(RCD)两种情况进行仿真,结果表明,加装RCD电路可以有效吸收MOSFET在关断瞬间产生的反峰电压。实验中,电流波形用Pearson线圈测量,用3个MOSFET并联作开关,当电容充电电压为450 V,负载为30 Ω时,脉冲电流13 A,前沿20 ns,平顶约80 ns;用3个单元调制器感应叠加,当电容充电电压为450 A,负载为30 Ω时,脉冲电流强度为40 A,前沿25 ns,平顶约70 ns。     

第五讲新型光纤水听器和矢量水听器

光纤水听器和矢量水听器作为当前水声研究领域最具有代表性的两大技术倍受业界关注。光纤水听器的重要贡献在于，从一个全新的角度出发，试图解决传统的水声传感和声纳数据传输一体化设计和实现的一系列问题，这有助于改善声纳系统的可靠性，并且有可能降低其制造、使用和维护的总成本。矢量水听器则由于其特有的指向性和矢量一相位处理方法，在低频和甚低频水声微弱目标探测方面具有潜在的优势．经过不懈的努力，光纤水听器和矢量水听器系统已经从实验室逐渐进入到工程应用阶段．这些对未来声纳系统的发展会产生相当重要的影响．文章尝试从声纳设计的角度对这两者的技术现状进行简要综述，包括它们各自的物理基础、工作原理、关键技术和应用领域．     

120 nm Bandwidth Erbium-doped Fiber Amplifier

A new dual band erbium-doped fiber amplifier configuration that provides 120 nm of optical bandwidth is simulated. This configuration employs a split-band architecture in which optical signals are splitted using a 1550/1610 nm port filter into two independent sub-bands which then pass in parallel through separate branches of the optical amplifier. Each branch may be optimized for the sub-band that traverses it. The independent sub-bands are combined and flattened before output, resulting in a 120 nm bandwidth gain-flattened optical amplifier.     

Variable Wavelengths Fiber Bragg Gratings Written with A Phase Mask and Four Prisms

Using only one diffractive element, the Talbot interferometer provides a robust and inherently stable method for reproducing fiber Bragg gratings with variable wavelengths, and reduces the complexity of the fiber grating fabrication system. However, the usable length of the grating is limited by the practical length of the mirrors. This paper presents a phase mask with two fixed prisms and two rotational prisms to inscribe fiber Bragg gratings with variable Bragg wavelengths. In this system, the fiber Bragg grating is inscribed by UV interference stripes of 193 nm derived from two rotational prisms and two fixed prisms, where phase mask is used as a beam splitter of ±1 order diffraction light. It is noteworthy that the tunable phase mask interferometer decreases the demand of the length of prism evidently.     

Quantum computation with ions in microscopic traps

We discuss a possible experimental realization of fast quantum gates with high fidelity with ions confined in microscopic traps. The original proposal of this physical system for quantum computation comes from Cirac and Zoller (Nature 404, 579 (2000)). In this paper we analyse a sensitivity of the ion-trap quantum gate on various experimental parameters which was omitted in the original proposal. We address imprecision of laser pulses, impact of photon scattering, nonzero temperature effects and influence of laser intensity fluctuations on the total fidelity of the two-qubit phase gate.