Effect of take-up speed on physical properties and permeation performance of cellulose acetate hollow fibers

Cellulose acetate (CA) ultrafiltration hollow fibers were spun via the dry-jet wet spinning technique. The effect of the take-up speed on the mechanical properties, morphology, thermal properties, pure water permeation, retention, and surface characterization of hollow fiber membranes were investigated. Both the inner and outer diameters of the hollow fiber decreased with the increase of take-up speed. Macrovoids were observed on the inner surface of the drawn hollow fibers. The d-space decreased with the increase of the take-up speed. The ultimate tensile stress (UTS) increased and the breaking elongation decreased with the increase of take-up speed. The permeation performance was measured. The hydraulic permeability increased and the retention decreased slightly with the increase of the take-up speed. The surface roughness increased with the increase of the take-up speed. The thermal analysis results showed that the endothermic peak shifts to the higher temperature region and coefficient of thermal expansion (CTE) decrease for a higher take-up speed.     

ξ-potential and surface dye-ability of poly(vinyl alcohol) fiber with different degree of formalization in a cationic dye solution

Summary The surface dyeability of the poly(vinyl alcohol) fiber with different degree of formalization was studied by measuring -potential of the fiber in alkaline aqueous solutions (pH 10) of a cationic dye Methylene Blue. With the increase in the dye concentration, the sign of the -potential of the fiber changed from negative to positive and thereafter the positive value approximated to saturated value, and the amount of dye adsorbed (expressed in mol/cm²-fiber) increased also. These results may possibly be attributed to the formation of the electrostatic bond between the fiber and the dye. The linear relations were found between and logC _d and its slope did not change with rise of temperature. The free energy of dyeing G (negative) calculated from the slope of the -logC _id curve, etc. increased with increasing the degree of formalization of the fiber. This fact corresponds to the increase in the surface dye adsorption with increasing the degree of formalization. With increasing the degree of formalization, the heat of dyeing H (negative) increased and the entropy of dyeing S (positive) decreased. The positive value of S for each fiber, suggests the formation of hydrophobic bond as a driving force to the dyeing of Methylene blue on the fiber surface in addition to the electrostatic bond.This paper is Part XXVII in a series on Studies on -potentials and Surface Dyeability of Natural and Synthetic Fibers in Dye Solution. Part XXVI: T. Suzawa andK. Kawakami, Nippon Kagaku Kaishi1975, No. 7,1134.     

酚醛基活性炭纤维孔结构及其电化学性能研究

利用水蒸汽活化法制备了酚醛基活性炭纤维(ACF-H2O), 对其比表面积、孔结构与在LiClO4/PC(聚碳酸丙烯酯)有机电解液中的电容性能之间的关系进行了探讨. 用N2(77 K)吸附法测定活性炭纤维的孔结构和比表面积, 用恒流充放电法和交流阻抗技术测量双电层电容器(EDLC)的电容量及内部阻抗. 研究表明, 在LiClO4/PC有机电解液中, ACF-H2O电极的可用孔径(d)应在0.7 nm以上. 随着活化时间的延长, ACF-H2O的孔容和比表面不断增大, 但微孔(0.7 nm ＜ d ＜ 2.0 nm)和中孔(d ＞ 2.0 nm)率变化很小, 活化过程中孔的延伸和拓宽同步进行, 但过度活化则造成孔壁塌陷, 孔容和比表面迅速下降. 因此, 除活化过度的样品外, 电容量随比表面积呈线性增长, 最高达到109. 6 F•g-1. 但中孔和微孔的孔表面对电容的贡献不同, 其单位面积电容分别为8.44 μF•cm-2和4.29 μF•cm-2, 中孔具有更高的表面利用率. ACF-H2O电极的电容量、阻抗特性和孔结构密切相关. 随着孔径的增大, 时间常数减小, 电解液离子更易于向孔内快速迁移, 阻抗降低, 电极具有更好的充放电倍率特性. 因此, 提高孔径和比表面积, 减少超微孔(d ＜ 0.7 nm), 是提高 EDLC能量密度和功率密度的重要途径. 然而仅采用水蒸汽活化, 只能在小中孔以下的孔径范围内进行调孔, ACF-H2O电极电容性能的提高受限.     

二氧化钛纤维表面担载Pt纳米结构的原子力显微镜研究

通过原子力显微镜研究了二氧化钛纤维表面担载Pt的表面形貌及其结构.结果表明,TiO2纤维表面担载的Pt具有微米尺度的近似六边形或者近似长方形的结构,与在单晶TiO2(110)表面的Pt纳米簇形貌相似,但尺度较大.TiO2纤维担载的Pt表面明显存在不同高度的台阶结构,台阶高度以2~4倍Pt(111)晶面面间距的高度为主.由Pt在TiO2纤维表面的形貌与纤维的纳米晶粒排布有序性推测可知,Pt与TiO2纤维存在强的相互作用,可能正是这种强相互作用和表面台阶结构才使TiO2表面担载的Pt虽是微米尺寸但仍具有高光催化活性.     

Sensitive Voltammetric Sensing of the 2,3‐Dimethyl‐2,3‐dinitrobutane (Dmnb) Explosive Taggant

The highly sensitive voltammetric detection of the 2,3‐dimethyl‐2,3‐dinitrobutane (DMNB), a required additive to commercial plastic explosives, is described. The protocol relies on a fast square‐wave voltammetric measurement of the DMNB explosive taggant at an unmodified carbon fiber electrode using a phosphate buffer (pH 7.0) solution. Different solutions and working electrodes were evaluated. Under the optimal conditions, a linear response is observed over the 300–3000 μg/L DMNB concentration range examined, with a detection limit of 60 μg/L. A highly stable response, with a relative standard deviation (RSD) of 2.6%, is observed for 30 repetitive measurements. Such electrochemical approach offers great promise for a simple, rapid, sensitive and inexpensive field screening of plastic explosives. Preliminary data illustrate the utility of electrochemical detection for electrophoretic microchips for the simultaneous measurements of DMNB, cyclotrimethylenetrinitramine (RDX) and pentaerythritoltetranitrate (PETN).     

Racemic ofloxacin separation by supported-liquid membrane extraction with two organic phases

As the relation of chirality and activities of drugs is researched deeply, people become to re-alize the clinic importance of chirality. The different enantiomers of a drug can have vastly differ-ent pharmacological activities, pharmacokinetic processes and toxicity[1,2]. The most well-docu- mented example is that of the drug substance thalidomide. Bitter lessons and scientific research promote the interest in single-enantiomer drugs, so the potential of the chiral drug market is enormous[3]. …     

聚酰亚胺中空纤维膜用于甲醇/甲基叔丁基醚的分离

甲醇／甲基叔丁基醚混合物的膜法分离，大多采用渗透汽化方法，少有采用蒸汽渗透法。用聚酰亚胺中空纤维膜，对以蒸汽渗透和渗透汽化两种方式分离甲醇／甲基叔丁基醚混合物（甲醇质量分数为0．01－0．30）的效果进行了对比。结果显示，在甲醇质量分数低于0．05时，蒸汽渗透较渗透汽化法的分离性能优越。     

Dehydration of tetrafluoropropanol (TFP) by pervaporation via novel PBI/BTDA-TDI/MDI co-polyimide (P84) dual-layer hollow fiber membranes

A novel PBI/P84 co-polyimide dual-layer hollow fiber membrane has been specifically fabricated through the dry-jet wet phase inversion process, for the first time, for the dehydration pervaporation of tetrafluoropropanol (TFP). Polybenzimidazole (PBI) was chosen as the outer selective layer because of its superior hydrophilic nature and excellent solvent-resistance together with robust thermal stability, while P84 co-polyimide was employed as the inner supporting layer because of its good solvent-resistance and thermal stability. The PBI/P84 membrane exhibits superior water selectivity and relatively high permeation flux. At 60 °C, the PBI/P84 dual-layer hollow fiber membrane shows a permeation flux of 332 g/(m² h) and a separation factor of 1990 for a feed solution containing of 85 wt% TFP. The preferential water sorption and the significant diffusivity difference between TFP and water are the main causes of high separation factor. However, an increase in feed temperature will greatly increase the permeation flux but seriously decrease the water selectivity. The activation energy data verify that water can preferentially permeate the PBI membrane due to the strong water affinity of PBI and a much smaller molecular size of water.     

Preparation of Tip‐Protected Poly(oxyphenylene) Coated Carbon‐Fiber Ultramicroelectrodes

A high‐yield, reliable, and reproducible method has been successfully developed to fabricate poly(oxyphenylene)‐coated carbon fiber ultramicroelectrodes (POCF UMEs) with tip radii r<2 μm. During the insulation process, the tip of the electrochemically etched electrode is protected by inserting it into an inert polymer while the remainder of the electrode is insulated by electrochemical deposition of a 1–3 μm thick poly(oxyphenylene) film. Optimum conditions for poly(oxyphenylene) deposition are developed and the resulting carbon fiber UMEs showed good cyclic voltammetric behavior even after storage for more than one year. These UMEs were tested for use as amperometric scanning electrochemical microscopy (SECM) tips and successfully imaged Au/Kel‐F and Al/SiC_p metal matrix composites.     

Solid-state pH nanoelectrode based on polyaniline thin film electrodeposited onto ion-beam etched carbon fiber

An ultramicro pH sensor has been constructed based on a thin polyaniline film that was electrochemically deposited onto a carbon fiber nanometer-size electrode. The substrate nanoelectrodes were fabricated using ion-beam conically etched carbon fibers with tip diameters ranging ca. from 100 to 500 nm. The polyaniline film was deposited from HCl solution containing the aniline monomer by cycling the potential between −0.2 and +1.0 V. The electromotive force (emf) signal between the pH sensitive polyaniline-coated nanoelectrode and an Ag/AgCl reference electrode was linear over the pH range of 2.0-12.5 with a slightly super-Nernstian slope of ca. −60 mV/pH unit. Response times ranged from several sec at pHs around 7 up to 2 min at pH 12.5. The proposed pH nanoelectrode displayed high ion selectivity with respect to K⁺, Na⁺, Ca²⁺, and Li⁺, with log K_H,M values around −12 and has a working lifetime of about 20 days. Key parameters important for the pH nanoelectrode performance, including polyaniline film preparation, selectivity, response time, temperature dependence, relative coating thickness, stability, and reproducibility, have been characterized and optimized. The performance of the pH nanoelectrode was examined by measuring the pH of several real samples including body fluids (serum, urine) and low ionic strength water samples (rain, deionized and tap water). The results agreed very well with those obtained by using commercial glass pH electrodes. The proposed pH nanoelectrode demonstrated attractive properties and seems particularly promising for use under physiological conditions.