Organopolysiloxanes as Chemically Sensitive Coatings for Optical Fibers

Various types of UV-curable organically modified siloxanes have been synthesized by the sol-gel method with the aim of fabricating chemically sensitive coatings for silica optical fibers. The refractive index of the coating material can be tailored in the range from 1.46 to 1.56 and sensitivity towards CO2 is achieved by incorporation of amino groups. The interaction of the cured layers with CO2 or with hydrocarbons has been studied in immersion experiments. Both the reaction of CO2 with incorporated amino groups and the penetration of hydrocarbons into the layer induce changes of the light absorption coefficient and the refractive index of the coating which are detected by measuring the output light intensity from the fiber.     

Preparation of a novel self-assembling nonlinear optical (NLO) polymer film

A novel self-assembling crosslinking second harmonic generation nonlinear optical (SHG/NLO) film with high SHG coefficient (2×10-7 e.s,u.by IR dichroism) was prepared by morecular design and "in-situ poling and sol-gel process".The content of the NLO chromophore (S)-(-)-1-(4)-mtrophenyl-2-pyrrolidinemethanol (NPP) is as high as 50 mol% since NPP molecules probably disperse in the film at a molecular level The film is rigid,uni form and transparent.This designed clathrate supermolecular structure was poved by IR,atomic force microseopv (AFM) and differential scanning calorimetry (DSC) detection.The title film exhibits a long-term temporal stability with 95% of the initial value of SHG coefficient maintained even after 20 d at 65℃(by UV spectroscopy)     

Quantitative millimetre wavelength spectrometry at pressures approaching atmospheric: II. Determination of oxygen at atmospheric pressure

A millimetre wavelength (MMW) Fabry-Perot cavity spectrometer described in earlier work has been applied to the measurement of oxygen absorption at 60 GHz and atmospheric pressure in a gas matrix of nitrogen. The spectrometer has also been modified such that the MMW source is stabilised by a sub-harmonic microwave signal transmitted by an infrared carrier on a single mode telecommunications fibre optic. This is a step towards developing an instrument comprising minimal electronic components that can perform MMW spectrometry remotely. Oxygen determinations were achieved by monitoring the change in the quality factor (Q) of a resonant Fabry-Perot cavity due to the presence of an absorbing sample. The MMW absorption of the sample was determined by incrementing the frequency modulation (FM) deviation of the source frequency scanning the cavity resonance profile. The response curve of absorption signal versus fraction of oxygen in nitrogen was found to be linear throughout the working range of 1-100% O₂ (v/v) in N₂ with a slope of (1.407±0.007)×10⁻⁴ m⁻¹ (% O₂)⁻¹. The detection limit (3× standard deviation of the background) was found to be ∼0.8% (v/v). The MMW technique employed is advantageous since, unlike common MMW techniques, there is no vacuum requirement. Application of this method, to the monitoring of oxygen in gas mixtures of practical importance, is proposed. Values of the oxygen spectral absorption coefficients of lines between 55 and 60 GHz were measured at reduced pressure and found to be within ±2% of previous literature values. A pressure correction coefficient for O₂ absorption at 60 GHz in the 45-121 kPa range was obtained and found to be (1.354±0.014)×10⁻⁴ m⁻¹ kPa⁻¹.     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting major components in bee pollen

In the present work, we study the use of near infra-red spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for determination of the major components in bee pollen. The method allows immediate control of the bee pollen without prior sample treatment or destruction through direct application of the fibre-optic probe to the sample.The regression method employed was modified partial least squares (MPLS). The calibration results obtained using 45 samples of bee pollen allowed the measurement of protein, moisture, ash, reducing sugars, and pH with multiple correlation coefficients (RSQ) and prediction corrected standard errors (SEPC) of 0.91, 0.56% for protein, of 0.78 and 0.49% for moisture; 0.92 and 0.049% for ash; 0.81 and 1.32 g of glucose/100 g of bee pollen; 0.84 and 0.15 for pH, respectively.The prediction capacity of the pattern was checked by applying it to samples of unknown pollen in external validation.     

辅酶Ⅰ在Co／CFUE上的电化学行为及应用

辅酶I(NAD+)在0.005moL/LTris 0.01moL/LNaCl溶液(pH7.0)中,于钴离子注入修饰碳纤维电极上出现一个S形的还原波,半波电位为-1.45V(vs.SCE)。峰电流与NAD+的浓度在2.38×10-5～4.76×10-4mol/L(r=0 9992)和4.76×10-4～1.78×10-3mol/L(r=0.9982)之间成线性关系,检出限为1.19×10-5mol/L,回收率在96.7%～103.4%之间。用线性扫描、循环伏安法研究了钴离子注入修饰碳纤维电极上NAD+的电化学行为。电极反应机理为:NAD++e NAD·;NAD·+e+H+ NADH;2NAD·→NAD2。另外,钴离子注入修饰碳纤维电极对NAD+具有电催化作用。     

氯磺化聚乙烯结构和性能研究Ⅰ.氯磺化反应及其对晶体结构的影响

氯磺化聚乙烯水解后是一种性能特异的离子交换膜。本文研究了低密度及高密度聚乙烯中空纤维氯磺化反应时间与交换容量之间的关系,并用红外光谱及广角X射线衍射法测定了氯磺化反应对聚乙烯晶体结构的影响。结果表明,氯磺化反应主要发生在聚乙烯的非晶区,最大交换容量及反应速度均与非晶区含量有关。反应对晶粒表面也有一定程度的侵蚀作用,随着交换容量的增加,结晶度下降,晶粒度减小。低密度及高密度聚乙烯的变化趋势相似,但前者比后者变化更显著。     

KINETICS OF DEPOSITION OF METAL IONS TO ACTIVATED CARBON FIBERS (ACFs) WITH FLUIDIZATION

1. INTRODUCTION Study on the deposition of metal ions on ACFs indicated that such a process consists of several consecutive steps [1]: (1) transfer of the solvated ions (metal ions) from the bulk solution to the proximity of the ACFs surface; (2) absorpt…     

我国化学纤维新品种的发展

本文紧紧围绕发展我国化纤新品种的现状和展望,提出由“产品先导型”向“技术先导型”、由“市场开发型”向“发展型”过渡的发展展望。按化纤新品种几种主要发展途径,侧重就我国化纤新品种的成就,如:合成新的高聚物,化学、物理(包括结构)改性和纱线、织物后整理等,特别对共聚、共混、多种复合技术改性等,进行了重点讨论。     

ADSORPTION CAPACITY OF ACTIVATED CARBON FIBER FABRIC IN CYANIDE LEACHING LIQUOR OF GOLD ORES

1. INTRODUCTION Reclamation of gold in liquid of gold with activated carbon fiber (ACF) is reported. ACF possessed numerous advantages, such as high adsorption capacity, great adsorption rate and high recovery of gold. It was generally considered tha…     

铬酸引发丙烯腈与苎麻纤维接枝共聚反应

棉、麻类织物通过与乙烯类单体接枝共聚可以提高染色性、皱折回复性、耐磨性、防污性等［‘j．纤维素接枝共聚物的合成始于50年代，目前研究最多的是乙烯类单体通过自由基活性中间体与纤维素进行接技共聚，但此法存在一个突出的问题是在接技共聚的同时生成大量均聚物．铬酸（下文用Cr’“表示）是公认的强氧化剂，据报道［’－‘j，它单独存在时并不能引发乙烯类单体聚合，如果用Cr‘”引发乙烯类单体与纤维素接技共聚，均聚物的生成量将会减少．本文以Cr’”为引发剂，将丙烯睛（AN）与艺麻纤维进行接技共聚，考查不同条件对接技率及均聚…