Synthesis and Luminescence Property of 4,4＇-Bis（2,2-di（4-fluorophenyl）vinyl）biphenyl for Organic Blue-Light-Emitting Diodes

The novel fluorinated distyrylarylene, 4,4＇-bis（2,2-di（4-fluorophenyl）vinyl）biphenyl （DFPVBi）, was synthesized and fully characterized. The structure was confirmed with IR, 1↑H NMR, 13↑C NMR, 19↑F NMR and MS analyses. Its electronic and photoluminescence properties were investigated by UV-Vis absorption, cyclic voltammetry and fluorescence spectroscopy. The energy levels of the highest occupied molecular orbital （HOMO） and the lowest unoccupied molecular orbital （LUMO） are --5.77 and --2.75 eV, respectively. The electroluminescence proper- ties of the organic light-emitting diode fabricated by DFPVBi were also studied. The device exhibits a pure blue emission peaked at 454 nm, which indicates a maximum luminance of 5872 cd/m ^2 at 14.2 V and a maximum current efficiency of 2.82 cd/A at 10V, respectively.     

Solid-state synthesis and properties of SmCoO3

In this paper, perovskite oxide SmCoO₃ was prepared by the solid-state reaction method using Co₂O₃ and Sm₂O₃ as raw materials. The structure and properties of the samples were investigated by XRD, Raman spectral techniques, and DC measurements and so on. The results of XRD and Raman spectra showed that the mixtures of Co₂O₃ and Sm₂O₃ can react to produce a single phase perovskite oxide SmCoO₃ around 1353 K. The single-phase SmCoO₃ changes from an insulator to a semi-conductor and transition occurs around 470 K. The thermal expansion coefficient (2.17 × 10⁻⁵ K⁻¹) of the single-phase SmCoO₃ is approximately equal to that of doped LaGaO₃, but much bigger than that of SDC(Ce_0.85Sm_0.15O₂) above 873 K.     

主链含膦酸酯的聚酸酐药物控制释放材料研究

通过二氯膦甲（乙）酸乙酯与对羟乙氧基苯甲酸反应，制备了二羧苯氧乙氧基膦甲（乙）酸乙酯，并其转化成混合醋酐并通过熔融缩聚，合成了主链含膦甲（乙）酸乙酯的聚酸酐，以二羧苯氧乙氧基膦甲（乙）酸乙酯，分别与１，３－双（４－羧基苯氧基）丙烷（ＣＰＰ）及癸二酸（ＳＡ）共聚，得到相应的共聚酸酐，对所合成的单体和聚合物的结构进行了表征，研究了它们的体外降解，酶促降解及其对抗肿瘤药物５－氟尿嘧啶和氨甲喋蛉的释放性能     

化学计量及其进展

扼要介绍了化学计量主要研究内容和量传方法。并从化学计量技术机构,基准、标准装置,标准物质,检定规程和化学计量学等方面,叙述了化学计量的进展概况。     

四苯基卟啉铂电致发光性能的研究

四苯基卟啉铂(PtTPP)可以作为红光掺杂材料制备有机电致发光器件，采用的器件结构为[ITO／CuPc／NPB／BePP2：PtTPP／LiF／Al]，其中BePP2：PtTPP的共沉积膜作为发射层．实验结果表明在发射层中存在着从BePP2到PtTPP的能量传递．通过改变掺杂层中PtTPP的浓度来考察器件的性能，当PtTPP的掺杂浓度在8％(物质的量比)时，器件呈现纯正的红光发射，发射峰位于668nm，器件的效率为0．004lm／W．     

Investigation on spontaneous ignition of two kinds of organic material with water

A systematic investigation was performed to elucidate the cause of spontaneous ignition of Refuse Derived Fuel (RDF) and Meat Bone Meal (MBM). Heat generation in both RDF and MBM with addition of water liquid and vapor at room temperature was determined by isothermal calorimetry. Compared with water liquid, the heat of wetting by sorption of water vapor at 80% relative humidity and 25 °C was larger, which can raise the temperature of RDF and MBM more than 30 and 56 °C, respectively. Heat generation due to fermentation occurred and the temperature of RDF and MBM reached or exceeded 80 °C after 5 days for RDF and 4 days for MBM at 100% RH. The spontaneous ignition for RDF and MBM results from heat of wetting and fermentation at room temperature and a further exothermic reaction at higher temperature.     

Synthesis and electrochemical properties of Zn3V3O8 as novel anode material

Zn₃V₃O₈ two-dimensional micro sheets are successfully synthesized by combination of solvothermal method and heat treatment. The Zn₃V₃O₈ has better electrochemical performances after calcinations.     

电化学合成镍配合物的研究

采用金属镍为“牺牲”阳极，首次在无隔膜电解槽中，电化学溶解金属镍一步 制备了纳米NiO前驱体Ni(Oet)2,Ni(Obu)2,Ni(Oet)2(acac)2，Ni(Obu)2(acac)2 [acac为乙酰丙酮基].产物通过红外光谱（FT-IR）、拉曼光谱（Raman spectrum） 进行表征。同时讨论了影响电合成镍醇盐及其配合物的关键因素。实验表明，防止 阳极钝化，温度控制在30-40℃，采用有机胺溴化物为导电盐，可以提高电合成效 率。     

反相液相色谱用球形共聚物柱填料

采用新颖聚合工艺制备用于反相高效液相色谱柱填料的乙基苯乙烯-二乙烯苯球形共聚物,不需使用备有高速搅拌的混匀器和特殊的筛析设备,聚合物粒径的95％在3～7μm之间,测算了渗透性、柱效和峰不对称性等柱参数,并通过分离实例说明该填料对胺类、酚类和芳烃类具有优良分离性能。     

电化学合成铜配合物的研究

采用金属铜为"牺牲"阳极,首次在无隔膜电解槽中,电化学溶解金属铜一步制备了纳米CuO前体Cu(OEt)2, Cu(OBu)2, Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac) (acac为乙酰丙酮基).产物通过红外光谱(FT-IR)、拉曼光谱(Raman spectrum)进行表征.同时讨论了影响电合成铜醇盐及其配合物的关键因素.实验表明,防止阳极钝化,温度控制在30～50 ℃,采用有机胺溴化物为导电盐, 电极电位控制在0.8～1.2 V之间,可以提高电合成效率.实验同时表明Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac)可作为制备含铜纳米材料前驱体.