75°前缘后掠角细长三角翼失速特性实验研究

本文简介了前缘后掠角为７５°的平板三角翼在西北工业大学ＮＦ－３低速风洞中的测力和相关的激光片光流动显示实验，给出了部分实验结果，并与文献［１－３］的结果进行了比较，虽然各种来源的结果存在着明显的差异，但ＮＦ－３风洞两种测试手段的实验结果却具有良好的相关性。     

Interaction of a Streamwise Vortex with an Oblique Shock Wave

Interaction of a supersonic streamwise vortex with an oblique shock wave is considered. A mathematical model of the streamwise vortex is constructed. Three interaction regimes (weak, moderate, and strong) are found. It is shown numerically that vortex breakdown is possible in the case of strong interaction. The influence of the governing parameters on the interaction type is studied. It is shown that the main effect on the interaction type is exerted by the streamwise velocity and angle of the wedge forming the shock wave. The effect of splitting of the primary vortex on the shock wave in the case of moderate and strong interaction regimes is found.     

Analytical potential of a laser ablation–glow discharge–optical emission spectrometry system for the analysis of conducting and insulating materials

The analytical capabilities of a glow discharge (GD) as a secondary source for excitation/ionization of the material provided by laser ablation (LA) have been compared to conventional laser induced breakdown spectroscopy (LIBS). In LA–GD both sources can be independently adjusted to optimize the sampling process and then its subsequent excitation. This could involve a number of analytical performance advantages, such as reduced matrix dependence, greater precision and sensitivity than those encountered in LIBS. For such purpose, an ablation chamber design including two electrodes to generate the GD discharge has been built and assayed. A comparison between LIBS and LA–GD–OES has been carried out, both, under reduced argon and helium atmospheres. Different sets of samples (conducting reference materials, glass and fluorine pellets) have been used to evaluate the novel coupled technique. The LA–GD coupled system has shown to provide lower detection limits. In addition, best linear correlations between intensities and concentrations and lower matrix effects have also been found using the coupled system. Moreover, special advantages of the LA–GD–OES have also been demonstrated for the analysis of fluorine.     

Research on mechanical and dielectric properties of XLPE cable under accelerated electrical‐thermal aging

Research into the electrical‐thermal aging properties of cross‐linked polyethylene (XLPE) cable has great significance, because of its wide application. This study conducted accelerated electrical‐thermal aging tests on 10‐kV XLPE cable in order to assess the cable's mechanical and dielectric properties. After being aged by applying 34.8‐kV AC voltage at the four temperatures of 90, 103, 114, and 135°C, the cable samples were taken out in five stages according to the aging time and cut into slices. The slices were conducted experiments to test the breaking elongation, tensile strength, gel content, breakdown voltage, and frequency spectrums of the dielectric constant and dielectric loss. The results demonstrate that the mechanical strength and gel content of XLPE vary greatly under different aging temperatures, a finding that is associated with the crystallization characteristics of the material. The breakdown voltage shows a slight decreasing trend with aging time. The dielectric constant decreases with aging time in high‐frequency areas (10³–10⁶ Hz), while the dielectric loss factor increases with aging time at low frequencies (10^?2–0 Hz). These two parameters can be used to characterize the degree of aging in cable. Copyright © 2016 John Wiley & Sons, Ltd.     

Flow produced in a conical container by a rotating endwall

Numerical calculations have been carried out for flow in a truncated cone generated by rotation of one endwall. For both convergent (radius increasing with approach to the rotating endwall) and divergent geometries, vortex breakdown is suppressed beyond a certain angle of inclination of the sidewall. At the same time Moffat eddies of increasing strength and extent appear in the corner between the sidewall and the non-rotating endwall. For the divergent geometry, a zone of recirculation appears on the sidewall and eventually merges with the Moffat eddies. The flow phenomena identified from streamline patterns are consistent with the calculated variation of pressure around the periphery of the computational domain.     

CuSO_4溶液中Cu元素浓度的激光诱导击穿光谱测量研究

利用激光诱导击穿光谱技术对CuSO4溶液中的Cu元素浓度进行实验测量。利用配置的七种浓度的CuSO4溶液,采用统计探索性数据分析方法给出了Cu元素定标曲线,其拟合度系数R2大于0.98,激光诱导击穿光谱的平均相对偏差值为6.9%,Cu元素的平均最小检测限为12ppm。利用去一交互检验方法采用分析谱线CuⅠ324.75nm和CuⅠ327.40nm对应的七种溶液的平均测量相对误差分别为6.52%和5.86%。当Cu元素浓度在10ppm时实验相对误差较大,其值为10.3%,而浓度达到2 000ppm时相对误差值减小,仅为1.1%,说明LIBS技术在溶液较低元素浓度检测方面的准确度有待提高。研究结果表明激光诱导击穿光谱技术在环境水污染重金属元素检测方面具有潜在的应用前景。     

阶梯AlGaN外延新型Al0.25Ga0.75N/GaNHEMTs器件实验研究

本文报道了作者提出的阶梯AlGaN外延层新型AlGaN/GaN HEMTs结构的实验结果. 实验利用感应耦合等离子体刻蚀(ICP)刻蚀栅边缘的AlGaN外延层, 形成阶梯的AlGaN 外延层结构, 获得浓度分区的沟道2DEG, 使得阶梯AlGaN外延层边缘出现新的电场峰, 有效降低栅边缘的高峰电场, 从而优化了AlGaN/GaN HEMTs器件的表面电场分布. 实验获得了阈值电压-1.5 V的新型AlGaN/GaN HEMTs器件. 经过测试, 同样面积的器件击穿电压从传统结构的67 V提高到新结构的106 V, 提高了58%左右; 脉冲测试下电流崩塌量也比传统结构减少了30%左右, 电流崩塌效应得到了一定的缓解.     

纳秒激光诱导等离子体发射光谱中的自吸收效应

为了减小激光诱导等离子体发射光谱中光谱线的自吸收效应,提高激光光谱分析技术对物质中高含量元素的检测水平,实验采用了一种平面反射镜装置约束等离子体,比较了有或无平面反射镜装置时光谱线的线型变化。实验表明,在无平面反射镜装置时,样品元素Al,Mg和Mn的光谱线半高全宽度分别为0.16,0.24,0.058nm,而采用由四块平面反射镜组成的装置在空间上约束激光等离子体时分别为0.11,0.13,0.047nm。结果表明,光谱线的自吸收明显减小,谱线线型变得比较锐且强度显著提高。通过观测等离子体照片,测量等离子体温度和电子密度,分析讨论了激光光谱自吸收效应降低的原因。     

Breakdown potential modelling of austenitic stainless steel

The breakdown potential is a crucial factor in the study of pitting corrosion resistance of stainless steel. This work aims to demonstrate the advantage of different chemometric techniques to estimate the breakdown potential of austenitic stainless steel. In order to predict pitting corrosion behaviour of stainless steel, a total of 60 samples of this alloy were subjected to electrochemical tests varying chloride ion concentration, pH and temperature. The experimental values of the breakdown potential, in addition to the tested environmental factors, were used to construct the predictive models based on support vector machines and artificial neural networks. A multiple‐comparison study based on statistic tests was applied to determine the optimal configuration for each technique. According to the results, support vector machines became a suitable and reliable technique to be applied in the modelling of the breakdown potential of austenitic stainless steels. This technique outperformed the models based on artificial neural networks and provided a useful tool to compare the pitting corrosion resistance of stainless steel in different environmental conditions without recourse to polarization tests. Therefore, this model presented a relevant meaning in science and engineering applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Integrated analytical methodologies for the study of corrosion processes in archaeological bronzes

The investigations on structure and micro-chemical composition of archaeological metal alloys are needed in archaeometry. The aim of this study is devoted both to acquire information about their provenance and production technology, and to improve our understanding about the corrosion processes. In this paper we present the study of the corrosion phenomena of bronze samples, laboratory-made according to binary, ternary and quaternary alloys typical of Roman archaeometallurgical production through an integrated methodology based on the use of non or micro invasive physical techniques. Among the analysed samples, two were artificially aged through burial in the archaeological site of Tharros, along the west coast of Sardinia (Italy). The corrosion products, typical of the bronzes in archaeological sites near the sea, have been characterized by non invasive and micro-destructive measurements. In particular, the corrosion patinas were examined through optical microscopy, scanning electron microscopy and microanalysis, X-ray fluorescence and laser ablation spectroscopy. The use of integrated technologies allowed us to determine both the elemental composition and surface morphology of the patina, highlighting the correlation between patina nature and chemical composition of the burial context. Moreover, data obtained by the laser-induced breakdown spectroscopy along the depth profile on the samples, have yielded information about the stratigraphic layers of corrosion products and their growth. Finally, the depth profiles allowed us to verify both the chemical elements constituting the patina, the metal ions constituting the alloy and the occurrence of migration phenomena from bulk to the surface.