An efficient, recoverable fluorous organocatalyst for direct reductive amination of aldehydes

A commercially available perfluorooctyl aniline and phenyl isothiocyanate were reacted under mild conditions to give 1-[4-(perfluorooctyl)phenyl]-3-phenylthiourea as an analogue of thiourea-based organocatalyst. This fluorous organocatalyst was successfully employed to direct reductive amination of aldehydes. It could be readily separated from reaction product by fluorous solid phase extraction for direct use.     

Optimization of supercritical fluid extraction of saikosaponins from Bupleurum falcatum with orthogonal array design

Supercritical fluid extraction (SFE) was used to extract saikosaponins a, c and d from the root of Bupleurum falcatum. An orthogonal array design L₉(3)⁴ was employed as a chemometric method for the optimization of the SFE conditions. The effects of four factors including pressure (30–40 MPa), temperature (40–50°C), ethanol concentration (60–100%) and time (2.5–3.5 h) on the yields of saikosaponins were investigated by a preparative SFE system in the SFE mode. Under the optimized conditions, namely 35 MPa of pressure, 45°C of temperature, 80% of ethanol concentration and 3.0 h of time, the yields of saikosaponin c, saikosaponin a, saikosaponin d, total saikosaponins and SFE extract were 0.16, 0.12, 0.96, 1.24 and 16.48 mg/g, respectively. Determinations of the saikosaponins were performed by HPLC.     

Optimized ultrasound‐assisted extraction procedure for the analysis of opium alkaloids in papaver plants by cyclodextrin‐modified capillary electrophoresis

This study investigated the use of ultrasound‐assisted extraction to improve the extraction efficiency of morphine, codeine and thebaine from the papaver plants. Extraction conditions such as type of solvent, temperature, duration, frequency and power level of ultrasonic were optimized and the influences of different parameters on resolution of alkaloids in CE were studied. The optimized condition for CE separation includes a sodium phosphate buffer (100 mM, pH 3.0) containing 5 mM α‐CD. The optimized extraction conditions for ultrasound‐assisted extraction was an extraction time of 1 h, an ultrasonic frequency of 60 kHz with water–methanol (80:20) at 40°C as the extraction solvent. The LOD for alkaloids was found to be 0.1 μg/mL at a signal‐to‐noise ratio of 3:1. The RSDs for peak areas were in the range of 1.4–4.4%. The amounts of opium alkaloids (mg/100 g dried sample) in four Iranian papaver plants were found to be in the range of 7.8–8.7 (morphine), 5.5–9.5 (codeine) and 1.4–10.4 (thebaine). It should be emphasized that no cleanup of the filtered extract was required; hence, direct determination after extraction drastically simplifies the analytical process.     

Composition and antioxidant activity of Thymus vulgaris volatiles: Comparison between supercritical fluid extraction and hydrodistillation

Supercritical fluid extraction (SFE) of the volatile oil from Thymus vulgaris L. aerial flowering parts was performed under different conditions of pressure, temperature, mean particle size and CO₂ flow rate and the correspondent yield and composition were compared with those of the essential oil isolated by hydrodistillation (HD). Both the oils were analyzed by GC and GC‐MS and 52 components were identified. The main volatile components obtained were p‐cymene (10.0–42.6% for SFE and 28.9–34.8% for HD), γ‐terpinene (0.8–6.9% for SFE and 5.1–7.0% for HD), linalool (2.3–5.3% for SFE and 2.8–3.1% for HD), thymol (19.5–40.8% for SFE and 35.4–41.6% for HD), and carvacrol (1.4–3.1% for SFE and 2.6–3.1% for HD). The main difference was found to be the relative percentage of thymoquinone (not found in the essential oil) and carvacryl methyl ether (1.0–1.2% for HD versus t?0.4 for SFE) which can explain the higher antioxidant activity, assessed by Rancimat test, of the SFE volatiles when compared with HD. Thymoquinone is considered a strong antioxidant compound.     

On‐line flow‐through extraction–preconcentration‐large volume injection‐RP LC for trace determination of pyrethroids in Slovak soil

A rapid micro‐analytical multiresidue method was developed for analysis of pyrethroids (kadethrin K, cypermethrin C and permethrin P) in soil micro‐sample (200 mg). It uses on‐line flow‐through extraction of soil micro‐samples (packed into a short glass column) with a methanol‐aqueous citric acid buffer mixture, successive on‐line SPE preconcentration of analytes from the extract and on‐line RP‐HPLC analysis with UV photometric detection. The separation of pyrethroids is performed on a Purospher RP‐18e column with methanol/water as mobile phase. Effects of sorbent placed at the bottom of a short column holding the soil sample and different kinds of on‐line SPE columns were tested. Besides, the influence of volume of the effluent on the pyrethroids recovery was also studied. Calibration curves were linear over the range assayed from 0.01 to 0.2 μg/mL with correlation coefficients of linear regression (least‐squares method) in the range 0.998–0.999. Recovery studies were carried out at 0.25–1.00 μg/g dry soil fortification level and obtained recoveries were for K 81–84%, C 56–59% and for P 58–63%. Achieved LOD (confidence band) of studied pyrethroids were for large‐volume injection (1 mL) 4.5 ng K, 3.7 ng C, 3.6 ng P or 27 ng/g K, 32 ng/g C and 29 ng/g P in dry soil “solid sampling HPLC”.     

基于聚酰胺6纳米纤维膜的固相萃取-高效液相色谱法测定兔血浆中酮康唑对映体

以基于聚酰胺6纳米纤维膜的固相萃取法,结合高效液相色谱手性流动相添加剂法测定了兔血浆中的酮康唑对映体的浓度。仅用1.5mg聚酰胺6纳米纤维膜、100μL甲醇即可完成目标物的富集和洗脱。酮康唑的2个对映体在50.0～400.0μg/L范围内呈良好的线性;方法的定量限为40.0μg/L;日内和日间精密度分别小于6.3%和8.6%;平均绝对回收率为79.4%～85.6%;平均相对回收率为90.0%～96.5%。本方法灵敏、准确、重现性好,符合生物样本中酮康唑对映体分析测定的要求。     

Pharmacophore mapping and electronic feature analysis for a series of nitroaromatic compounds with antitubercular activity

A five point pharmacophore was generated using PHASE for a series of nitroaromatic compounds and their congeners as antitubercular agents. The generated pharmacophore yielded significant 3D‐QSAR model with r² of 0.890 for a training set of 92 molecules. The model also showed excellent predictive power with correlation coefficient Q² of 0.857 for a test set of 31 compounds. The pharmacophore indicated that presence of a nitro group, a piperazine moiety, one aromatic ring feature and two acceptor features are necessary for potent antitubercular activity. The pharmacophore was supported by electronic property analysis using density functional theory (DFT) at B3LYP/3–21*G level. Molecular electrostatic profile of the compounds was consistent with the generated pharmacophore model, particularly appearance of localized negative potential regions near both the oxygen atoms of nitro group extending laterally to the isoxazole ring system/amide bond in the most active compounds. Calculated data further revealed that all active compounds have smaller LUMO energies located over the nitro group, furan ring, and isoxazole ring/amide bond attached to it. Higher negative values of LUMO energies concentrated over the nitro group are indicative of the electron acceptor capacity of the compounds, suggesting that these compounds are prodrugs and must be activated by TB‐nitroreductase. The results obtained from this study should aid in efficient design and development of nitroaromatic compounds as antitubercular agents. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Low-density extraction solvent-based solvent terminated dispersive liquid–liquid microextraction combined with gas chromatography-tandem mass spectrometry for the determination of carbamate pesticides in water samples

A simple and fast method of low-density extraction solvent-based solvent terminated dispersive liquid–liquid microextraction (ST-DLLME) was developed for the highly sensitive determination of carbamate pesticides in the water samples by gas chromatography-tandem mass spectrometry (GC-MSMS). After dispersing, the obtained emulsion cleared into two phases quickly when an aliquot of acetonitrile was introduced as a chemical demulsifier into the aqueous bulk. Therefore, the developed procedure does not need centrifugation to achieve phase separation. It was convenient for the usage of low-density extraction solvents in DLLME. Under the optimized conditions, the limits of detection for all target carbamate pesticides were in range of 0.001–0.50 ng mL⁻¹ and the precisions were in the range of 2.3–6.8% (RSDs, 2 ng mL⁻¹, n = 5). The proposed method has been successfully applied to the analysis of real water samples and good spiked recoveries over the range of 94.5–104% were obtained.     

Application of a quick,easy, cheap,effective, rugged and safe-based method for the simultaneous extraction of chlorophenols,alkylphenols, nitrophenols and cresols in agricultural soils,analyzed by using gas chromatography–triple quadrupole-mass spectrometry/mass spectrometry

Due to the different physico-chemical properties of phenols, the development of a methodology for the simultaneous extraction and determination of phenolic compounds belonging to several families, such as chlorophenols (CPs), alkylphenols (APs), nitrophenols (NTPs) and cresols is difficult. This study shows the development and validation of a method for the analysis of 13 phenolic compounds (including CPs, APs, NTPs and cresols) in agricultural soils. For this purpose, a quick, easy, cheap, effective, rugged and safe (QuEChERS)-based procedure was developed, validated and applied to the analysis of real samples. A derivatization step prior to the final determination by gas chromatography (GC) coupled to a triple quadrupole analyzer operating in tandem mass spectrometry (QqQ-MS/MS) was performed by using acetic acid anhydride (AAA) and pyridine (Py). The optimized procedure was validated, obtaining average extraction recoveries in the range 69–103% (10 μg kg⁻¹), 65–98% (50 μg kg⁻¹), 76–112% (100 μg kg⁻¹) and 76–112% (300 μg kg⁻¹), with precision values (expressed as relative standard deviation, RSD) ≤ 22% (except for 4-chlorophenol) involving intra-day and inter-day studies. Furthermore, 15 real soil samples were analyzed by the proposed method in order to assess its applicability. Some phenolic compounds (e.g. 2,4,6-trichlorophenol or 4-tert-octylphenol) were found in the samples at trace levels (<10 μg kg⁻¹).     

Rapid magnetic solid-phase extraction based on magnetite/silica/poly(methacrylic acid–co–ethylene glycol dimethacrylate) composite microspheres for the determination of sulfonamide in milk samples

A novel magnetic solid-phase extraction (MSPE) sorbent, magnetite/silica/poly (methacrylic acid–co-ethylene glycol dimethacrylate) (Fe₃O₄/SiO₂/P(MAA-co-EGDMA)), was developed. This MSPE material was prepared by distillation–precipitation polymerization of MAA and EGDMA in the presence of Fe₃O₄/SiO₂ microspheres with the surface containing abundant reactive double bonds. The resultant sorbent material was characterized by elemental analysis, electron microscopy, X-ray diffraction and Fourier-transformed infrared spectroscopy. In this work, eleven sulfonamides (SAs) were selected as model analytes to validate the extraction performance of this new MSPE sorbent. Noticeably, the extraction can be carried out quickly, the extraction time for the SAs onto Fe₃O₄/SiO₂/P(MAA-co-EGDMA) sorbent can be clearly shortened to 0.5 min. The desorption solution of SAs was analyzed by LC–MS/MS, and the results showed that the recoveries of these compounds were in the range of 87.6–115.6%, with relative standard deviations ranging between 0.9% and 10.8%; the limit of detection were in the range of 0.5–49.5 ng/L.