速调管输出间隙能量转换过程的二维数值分析模型

本文提出了分析速调管束波互作用能量转换的二维模型和假设，详细描述了在能量转换过程中的电子运动方程，并指出了能量转换的二维数值分析可能会对速调管基础理论的发展有所贡献的方面。     

HPLC-determination of nifedipine in plasma on normal phase

Summary For the determination of nifedipine in plasma a sensitive and selective method is required. The use of on-line pre-column enrichment, followed by reversed phase separation and UV-detection at 350 nm proved to be too susceptible. Therefore, detection was carried out after a post-column on-line reduction and photoreaction step using a fluorescence detector. Although this method proved to be extremely sensitive (limit of detection 0.1 ng/ml plasma) and selective, a number of problems cropped up caused by the reduction agent which finally prevented the procedure being used in routine analysis. As a consequence, the following method was developed. After liquid-liquid extraction of nifedipine a 1/3 of the extract was chromatographed on a normal phase (diOH) system and detected at 235 nm, because detection at 350 nm was not sensitive enough. This method has a limit of detection of 1 ng nifedipine/ml plasma and the calibration curve is linear up to 320 ng/ml. The recovery lies around 82% and the standard deviation for the range 6–320 ng/ml is less than 5%. So far about 2000 plasma samples have been analysed by this method.     

Determination of nonsteroidal antiinflammatory drugs in water samples using liquid chromatography coupled with diode-array detector and mass spectrometry

An analytical method for the determination of trace levels of six different nonsteroidal antiinflammatory drugs (NSAIDs) in water samples has been developed and validated. Environmentally relevant pharmaceuticals were chosen according to human consumption in Poland. Final analysis of the target compounds was performed by RP LC-diode-array detection-MS, whereas sample preparation included an SPE step. For this SPE step, a number of packing materials, such as LiChrolut RP-18, calixarene, Strata-X, BAKERBOND Narc-2, BAKERBOND Polar Plus, BAKERBOND styrene divinylbenzene-1, and Discovery DSC-18, were used, and their respective advantages and disadvantages in this study were discussed. The RP-18 phase was found to be the most retentive for all analytes. The detection limits for compounds in surface waters were varied from 0.005 for diflunisal to 0.095 microg/L for ibuprofen. The average recoveries of NSAIDs from the surface water samples ranged from 80 up to 103%. RSD value is relatively low (from 4% for fenoprofen up to 8% for ibuprofen). The performance of the method was tested with several environmental water samples.     

Development of a Solid-Phase Extraction Procedure for the Simultaneous Determination of Polyphenols, Organic Acids and Sugars in Wine

A solid-phase extraction (SPE) procedure that fractionates wine samples into 2 sub-samples containing sugars and organic acids (sub-sample 1) and low molecular weight polyphenols (sub-sample 2), respectively, together with rugged LC procedures for their analyses are described. Wine is adjusted to pH 2.5 and loaded on a styrene-divinylbenzene (SDB) cartridge. The organic acids and sugars are eluted with 20 mM sulphuric acid and the monomeric polyphenols with ethyl acetate. Glucose and fructose are analysed by normal phase LC with evaporative light scattering detection and the organic acids by ion exclusion chromatography with UV detection at 210 nm. Analysis of the phenolic fraction is performed by reversed phase LC with diode array detection. Recoveries and repeatabilitys for 27 standard compounds (2 sugars, 7 organic acids and 18 polyphenols) are presented. The method represents an improvement in terms of productivity and robustness compared to currently used procedures.     

Synergistic extraction of lanthanoids(III) with 2-thenoyltrifluoroacetone and benzoic acid: thermodynamic parameters in the complexation in organic phases and the hydration

In order to examine the reason why the magnitude of the synergistic effect observed in the extraction of lanthanoids(III) with a β-diketone and a monodentate Lewis base generally decreases along with increasing atomic number, the hydration number of the extracted species when lanthanoids(III) are extracted with TTA (2-thenoyltrifluoroacetone, HA) and benzoic acid (HB) into chloroform by Karl Fischer titration and the enthalpy change in complexation between LnA₃ and HB by calorimetric titration were determined across the lanthanoid series at 25 °C.It has been concluded that since the decrement of entropy change caused by the change in the number of released water molecules and in the coordination number of lanthanoids(III) upon complexation is larger than the increment of the enthalpy change, the values of the second formation constants of the complexes decrease with increasing the atomic number across lanthanoid series so that the magnitude of the synergistic extraction decreases with increasing the atomic number.     

Extractive Spectrophotometric Determination of Titanium in Silicate Rocks, Soils and Columbite–Tantalite Minerals

2,3-Dihydroxynaphthalene forms a strong chelate with titanium over the pH range 4 to 9. At pH 4–5, titanium is extracted into ethyl acetate along with iron, leaving behind V, Nb, Mo, and a host of elements present in complex matrices of rock samples. In the extract, titanium is easily separated from iron after raising the pH of the medium and re-extracting. The method is free from any interference. The sensitivity of the method is 3.2×10⁴ L·mol^–1cm^–1. The method has been applied to a number of diverse samples including rocks and minerals. The precision of the Ti method is excellent. This method has been compared with tiron, chromotropic acid, diantipyrilmethane (DAM) and other existing spectrophotometric methods used in the analysis of rocks, ores and minerals. The proposed method has definite advantages over most spectrophotometric methods in terms of sensitivity, selectivity, reproducibility and simplicity.     

An improved method for the analysis of major antioxidants of Hibiscus esculentus Linn

Major antioxidants of aqueous ethanol extract from Lady's Finger (Hibiscus esculentus Linn) were systematically investigated in this study. Firstly, high-performance liquid chromatography (HPLC) was applied to identify antioxidant peaks in a sample by spiking the sample extract with 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radical, which was prepared from manganese dioxide and ABTS. Secondly, in order to identify the elution period of major antioxidant peaks, the antioxidant capacities of different fractions from solid-phase extraction (SPE) were measured, and the chromatograms of fractions were also recorded. Lastly, multiple mass spectrometry (MS(n)) was used to elucidate the possible chemical structures of antioxidants, and nuclear magnetic resonance (NMR) was further applied for structure confirmation. The major antioxidant compounds in lady's finger were identified to be quercetin derivatives and (-)-epigallocatechin using HPLC-MS and HPLC-MS(n) (n = 2-4) techniques. It was found that about 70% of total antioxidant activity was contributed by four quercetin derivatives. The structures of major antioxidants, which were isolated by semi-preparative RP-HPLC with two tandem C18 columns, were further confirmed using UV-vis absorption spectroscopy and 13C NMR spectra. Quercetin 3-O-xylosyl (1' --> 2') glucoside, quercetin 3-O-glucosyl (1' --> 6') glucoside, quercetin 3-O-glucoside and quercetin 3-O-(6'-O-malonyl)-glucoside were first identified and characterized as major antioxidants in lady's finger.     

Dynamics of chelation-supercritical fluid extraction from wood fibers

The dynamics of supercritical fluid extraction (SFE) of the metal content of wood fibers chelated with lithium bis(trifluoroethyl) dithiocarbamate (FDDC) by supercritical (SF) CO2 was investigated experimentally by monitoring the spectra of the eluted metal complex as a function of time. The characteristic shape of the dynamic SFE curve was determined mainly by the flow conditions in the extraction vessel, the mass transfer resistance in the SF phase, and the solubility. High extraction yields of metal content were obtained in two-stage extraction including static (batch) and dynamic (semi-batch) stages. Increasing the length of the static stage increased the rate of dynamic elution of metal complex until it approached the dynamics of fluid displacement for a continuous stirred tank reactor (CSTR). In such cases, increasing the flow rate had no effect on the dynamic extraction curve when it was plotted using dimensionless time. Efficient chelation-SFE from wood fibers was obtained at a pressure of 20.3 MPa and with a static time of 30 min.     

Fluorimetric determination of aluminium in water by sequential injection through column extraction

A fluorimetric procedure for the determination of aluminium with matrix removal in drinking water is proposed. The system is based both on the solid phase extraction of aluminium on a new chelating resin (XAD-4 modified by grafting salicylic acid) and the fluorimetric detection of a complex formed between 8-hydroxyquinoline-5-sulfonic acid (HQS) and Al(III), after elution of the resin by hydrochloric acid. The sorption and elution of aluminium were studied in both competitive and non-competitive conditions, varying pH, flow-rates, volume and concentration of reagents, as well as time contact. The optimised procedure allows determination of Al³⁺ at the sub-ppb level (LOD: 0.2 g L^–1 for 1 ml of sample) within a working range of 0.2–500 g L^–1. The analytical procedure was successfully employed for the determination of aluminium in drinking water during and after flocculation/coagulation treatment processes.     

Determination of lead and nickel in Apple-Leaves and sea-water by electrothermal atomic absorption spectrometry after solid-phase extraction using Chromosorb-107 filled in a syringe

Lead and nickel were concentrated and separated after sorbing on Chromosorb-107 filled in a syringe prior to their determination by electrothermal atomic absorption spectrometry. To retain the analytes, the sample solution treated with or without ammonium pyrolidine dithiocarbamate (APDC) was drawn into the syringe filled with Chromosorb-107 and discharged back manually. Then the analyte elements were eluted by drawing and discharging the suitable eluent. The optimum experimental conditions for quantitative recoveries of analytes (amount of sorbent, pH of sample, concentration and kind of eluent, flow rates of sample and eluent and adding of the effect of complexing agent) were investigated. Nickel was quantitatively retained at pH6 irrespective of whether it was complexed with APDC while the quantitative sorption of lead was achieved at pH8 only if it was treated with APDC prior to passing through the sorbent. The lead and nickel retained on the sorbent were eluted drawing and discharging 4.5 M HNO(3), respectively. If the concentration of analyte elements in the sample were too low to be detected, then they were concentrated by increasing the ratio of sample value to eluent volume as needed. The lead and nickel in spiked sea-water samples and in certified reference Apple-Leaves (NIST SRM 1515) standards were quantitatively (95%) recovered with R.S.D. of around +/-2%.