析相光度法测定铜（Ⅱ）的研究

本文研究了Ｃｕ（Ⅱ）－ＰＥＧ（聚乙二醇－２０００）－Ｚｉｎｃｏｎ（锌试剂）－（ＮＨ４）２ＳＯ４体系的析相光度法并应用于测定Ｃｕ（Ⅱ）。最宜酸度为ｐＨ５．５～８．５（ＫＨ２ＰＯ４－Ｋ２ＨＰＯ４）缓冲溶液）其络合物的最大吸收位于６１０ｎｍ，表观摩尔吸光系数为４．０×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，Ｃｕ（Ⅱ）浓度在０～１．５ｍｇ／Ｌ范围内服从比尔定律，铜与Ｚｉｎｃｏｎ形式组成为１：２的稳定的蓝色络     

Mercury extraction by ionic liquids: temperature and alkyl chain length effect

The preliminary results described here show the complete transfer of Hg(II) ions, in the absence of a chelating agent in 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids; the lag time required to gain the quantitative metal ion partition turned out to be strongly dependent both on alkyl chain length on the imidazolium ring and on the working temperature.     

在线萃取流动注射分光光度法测定二羟基苯磺酸钙中微量对苯二酚

用在线萃取-流动注射分光光度法(FISP)测定了作为杂质与2,5-二羟基苯磺酸钙共存的对苯二酚。专门设计并制作了与流动注射分光光度测定单元组合在一起的在线萃取流路,对苯二酚用乙醚萃取进入有机相并在此相中于其吸收峰297.5 nm波长处测定其吸光度,通过萃取基体成分,即2,5-二羟基苯磺酸钙的干扰,由于其在乙醚中不溶解而得以消除。对苯二酚的吸光度与其相应浓度在3.5×10-6~5.0×10-4mol.L-1之间呈线性关系,相关系数达0.999 4。该方法的检出限为2.53×10-6mol.L-1。应用此方法分析了来自不同批次的3个试样,所得结果的RSD在0.69%~1.65%之间,且其值与药典法所测得结果相符。     

一个新的铀（Ⅵ）三元协萃体系

研究了由４，４＇－癸二酰－双－（１－苯基－３－甲基－５－吡唑啉酮）（ＤＢＰＭＰ，简作Ｈ２Ａ），氧化三辛基膦（ＴＯＰＯ），吡啶（Ｐｙ）组成的三元体系从硝酸溶液中对铀的协同萃取，斜率法确定萃合物组成为ＵＯ２Ａ．ＴＯＰＯ．Ｐｙ，制取了固体协萃配合物，并用元素分析、ＩＲ及ＨＮＭＲ等进行了表征。     

Solid Phase Extraction and Flame Atomic Absorption Spectrometric Determination of Trace Amounts of Zinc and Cobalt Ions in Water Samples

A simple and rapid method for the preconcentration of Co²⁺ and Zn²⁺ as their 2-guanidino-benzimidazole chelates is proposed using an octadecyl silica cartridge. The retained analytes were recovered with a mixture of 5mL of 0.01M HNO₃ and 5mL of methanol. The metal ions in the effluent were determined by flame atomic absorption spectrometry. The effect of different parameters, such as sample matrix, amount of ligand, type of eluent for elution of ions from cartridge, flow rates of sample solution and eluent, breakthrough volume, and limit of detection, were evaluated. The effects of various cationic and anionic interferences on the percent recovery of Co²⁺ and Zn²⁺ were also studied. Quantitative extraction efficiencies were obtained by elution of the cartridge with a minimal amount of solvent. Hence, with a typical preconcentration factor of 50, the limits of detections of the proposed method are 0.26 and 1.62ngmL^–1 for Zn²⁺ and Co²⁺, respectively. The method was applied to the determination of zinc and cobalt ions in different water samples.     

Semi-micro solvent extraction as a rapid and efficient preconcentration technique for the determination of n-alkanes in oil-contaiminated water and soil samples by capillary gas chromatography

Summary In this study, a rapid and efficient semi-micro extraction procedure is presented for the extraction of some higher n-alkanes from water and soil samples. In the case of water samples n-hexane was used as the organic phase in a phase volume ratio (volume of aqueous phase/volume of organic phase) higher than 285, while in the case of soil samples, extraction with n-hexane was carried out in the presence of an excess of 2 M NaCl solution. The extraction rate from soil samples is very high and is better than Soxhlet extraction, comparable with supercritical fluid extraction. High preconcentration factor in water samples allows the limits of detection to be in the ng.mL⁻¹ level with the use of gas chromatographic analysis. Flame ionization detector was used for monitoring the analytes. The obtained recoveries of all studied compounds from both water and soil samples are higher than 90%. This method was successfully used to determine some n-alkanes in municipal wastewater and contaminated soil.     

Sediment Matrix Induced Response Enhancement in the Gas Chromatographic–Mass Spectrometric Quantification of Insecticides in Four Different Solvent Extracts from Ultrasonic and Soxhlet Extraction

The performance of ultrasonic and Soxhlet extraction using hexane, dichloromethane, ethylacetate/methyl-tert-butylether (1/3, v/v) and hexane/acetone (1/1, v/v) for the analysis of seventeen insecticides in sediments was evaluated. The contents of the extracts differed severely. The extracts obtained with ethylacetate/methyl-tert-butylether (1/3, v/v) and hexane/acetone (1/1, v/v) were dark yellow to green, whereas the extracts obtained with dichloromethane and hexane were light yellow and clear respectively. This is due to higher solubility of matrix compounds in ethylacetate/methyl-tert-butylether (1/3, v/v) and hexane/acetone (1/1, v/v). High loads of coextracted matrix compounds lead to matrix effects in the evaporation step of GC–MS measurements. This is known as matrix induced response enhancement effect. Matrix effects and recoveries were checked by analysis of spiked sediments. The suitable choice of extraction method in connection with an appropriate solvent separates the analytes from matrix compounds. Matrix effects are reduced and recoveries of spiked samples are improved.Revised: 6 January and 2 May 2005     

Preconcentration of copper with multi-walled carbon nanotubes pretreated by potassium permanganate cartridge for solid phase extraction prior to flame atomic absorption spectrometry

A procedure for the preconcentration of copper was described in this paper using multi-walled carbon nanotubes (MWCNTs) oxidized by potassium permanganate as the adsorbent for the enrichment of trace copper in water samples. Important parameters, such as the sample pH, the concentration and volume of eluent, sample flow rate and volume, and interference of coexisting ions, were investigated. The obtained results indicated that proposed method possessed an excellent analytical performance. The linear range, the detection limit, and precison (RSD) were 1-100 ng/mL (R2 = 0.9993), 0.32 ng/mL and 2.88%, respectively. The results showed that copper could be adsorbed quantitatively on the pretreated MWCNTs with potassium permanganate, and proposed method was very useful in the monitoring of copper in the environment.     

A multisyringe flow-through sequential extraction system for on-line monitoring of orthophosphate in soils and sediments

A fully automated flow-through microcolumn fractionation system with on-line post-extraction derivatization is proposed for monitoring of orthophosphate in solid samples of environmental relevance. The system integrates dynamic sequential extraction using 1.0 mol l⁻¹ NH₄Cl, 0.1 mol l⁻¹ NaOH and 0.5 mol l⁻¹ HCl as extractants according to the Hieltjes-Lijklema (HL) scheme for fractionation of phosphorus associated with different geological phases, and on-line processing of the extracts via the Molybdenum Blue (MB) reaction by exploiting multisyringe flow injection as the interface between the solid containing microcolumn and the flow-through detector. The proposed flow assembly, capitalizing on the features of the multicommutation concept, implies several advantages as compared to fractionation analysis in the batch mode in terms of saving of extractants and MB reagents, shortening of the operational times from days to hours, highly temporal resolution of the leaching process and the capability for immediate decision for stopping or proceeding with the ongoing extraction. Very importantly, accurate determination of the various orthophosphate pools is ensured by minimization of the hydrolysis of extracted organic phosphorus and condensed inorganic phosphates within the time frame of the assay. The potential of the novel system for accommodation of the harmonized protocol from the Standards, Measurement and Testing (SMT) Program of the Commission of the European Communities for inorganic phosphorus fractionation was also addressed. Under the optimized conditions, the lowest detectable concentration at the 3σ level was ≤0.02 mg P l⁻¹ for both the HL and SMT schemes regardless of the extracting media. The repeatability of the MB assay was better than 2.5% and the dynamic linear range extended up to 7.0 mg P l⁻¹ in NH₄Cl and NaOH media and 15 mg P l⁻¹ whenever HCl is utilized as extractant for both the HL and SMT protocols.     

Quantification of free and total salicylic acid in plants by solid-phase extraction and isocratic high-performance anion-exchange chromatography

Salicylic acid (SA) is an important signaling compound in plants and is involved in various defense responses. Here we report a new method for quantification of free and total soluble SA in Arabidopsis thaliana with 5-fluorosalicylic acid (5-FSA) as internal standard. The SA was isolated from leaf extracts by solid-phase extraction with phenyl-phase cartridges and selectively eluted as the cationic iron(III)-complex. Recoveries of SA and 5-FSA were equal and exceeded 90%. Free SA was subsequently released from the iron(III)-complex by addition of 2,2-bipyridyl and high-performance anion-exchange chromatography was performed on an NH₂ column. The SA appeared as last peak with a retention time of 15 min, baseline-separated from other substances. On-line detection was performed fluorimetrically for both SA and 5-FSA at an excitation wavelength of 300 nm and an emission wavelength of 410 nm, because both substances give similar fluorescence spectra. The detection limit for SA was 5 ng g^–1 FW for a sample size of 100 mg. Thus the main advantages of the method are highly selective sample preparation, increased sensitivity, reduced analysis time compared with reversed-phase HPLC, and use of a novel internal standard detectable under the same conditions as SA. The techniques described are applicable to other plant materials.