生物质快速热解制备液体燃料

本文回顾了生物质快速热解液化技术的国内外研究现状,重点叙述了初级生物油的化学组成和燃料性质,指出生物油是一种复杂的含氧有机混合物,具有水分含量高、氧含量高、热值低、酸含量高、安定性差和化石燃油不互溶等独特的性质;针对这些性质,介绍了几种常用的生物油精制提炼方法,包括催化裂解、催化加氢、高温热解气过滤、添加助剂、催化酯化、柴油乳化以及制备富氢合成气与费托合成,并分析了各种精制技术发展的关键问题。     

QuEChERS-在线凝胶色谱-气相色谱-质谱法测定大米、黍子和小麦中34种农药残留

采用QuEChERS方法结合在线凝胶色谱-气相色谱-质谱（GPC-GC-MS）系统,建立了大米、黍子和小麦中34种中高毒农药的快速筛查方法。研究了称样量、萃取剂、净化吸附剂种类对大米样品提取净化效果的影响并考察了基质效应和分析保护剂的使用效果,采用选择离子监测（SIM）模式,外标法定量。结果表明,34种农药在大米、黍子和小麦中的检出限分别为0.0281~5.30、0.0282~4.82、0.0273~5.13 μg/kg;在0.05 μg/g添加水平的平均回收率分别为94.5%~117.1%、83.1%~121.7%、93.1%~120.2%;相对标准偏差（RSD,n=6）分别为2.6%~14.5%、3.4%~15.1%、3.5%~15.2%。该方法消耗试剂少,分析成本低,符合绿色化学的理念,具有操作便捷、快速、通用性强等特点,适用于大米、黍子和小麦中34种农药残留的快速筛查与检测。     

快速气相色谱控制系统的设计与应用

设计了一种用于快速气相色谱(Fast gas chromatography,FGC)的新型控制系统。该控制器主要由色谱柱温度控制系统、自动进样及气路压力控制系统组成。其温度控制范围为30~160℃,升温速度约为3℃/s,温度控制精度为±0.5℃,载气压力控制范围为0~0.5 MPa。将本控制器应用于自制快速色谱,并用色谱对由直链正构烷烃(C1~C8)以及甲苯9种物质组成的标准样品进行测试。结果显示,色谱能在100 s内将此9种物质完全分开。     

Fe_3O_4 nano-whiskers by ultrasonic-aided reduction in concentrated NaOH solution

Fe 3 O 4 nano-whiskers were synthesized via ultrasonic-aided reduction of FeCl 2 ·4H 2 O with N 2 H 4 ·H 2 O in concentrated NaOH solution. Phase identification and morphology observation were conducted by X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE-SEM). Face scanning energy dispersive spectrum (face scanning EDS) and two-dimensional fast Fourier transform (2DFFT) for element distribution were carried out for confirming compos...     

非线性玻尔兹曼方程的傅里叶谱方法

玻尔兹曼方程作为空气动理学中最基本的方程之一,是连接微观牛顿力学和宏观连续介质力学的重要桥梁.该方程描述了一个由大量粒子组成的复杂系统的非平衡态时间演化:除了基本的输运项,其最重要的特性是粒子间的相互碰撞由一个高维,非局部且非线性的积分算子来描述,从而给玻尔兹曼方程的数值求解带来非常大的挑战.在过去的二十年间,基于傅里叶级数的谱方法成为了数值求解玻尔兹曼方程的一种很受欢迎且有效的确定性算法.这主要归功于谱方法的高精度及它可以被快速傅里叶变换加速的特质.本文将回顾玻尔兹曼方程的傅里叶谱方法,具体包括方法的导出,稳定性和收敛性分析,快速算法,以及在一大类基于碰撞的空气动理学方程中的推广.     

发光二极管放电实验现象分析

利用直流电源对发光二极管(LED)的结电容充电,切断直流电源后对LED的电压-时间特性进行测量。当充电电压低于LED复合发光的门槛电压,LED的电压-时间特性与普通二极管的相似。当充电电压高于LED复合发光的门槛电压,首次观察到:开始放电的瞬间会出现一个快速下降过程,快速下降到门槛电压以下;LED上的电压越高,快速下降到的电压越低。对该现象进行分析,得到一些新的结论。当LED的正偏电压高于复合发光的门槛电压后,出现了注入到扩散区的非平衡载流子随正偏电压的提高而减小的现象,即dQ/du<0。     

Use of chemical etching of CR-39 foils at elevated temperature for fast neutron personnel monitoring in India

CR-39 Solid State Nuclear Track Detecting foils (SSNTD), along with 1 mm thick polyethylene radiator, sealed in triple laminated pouches, are used for country wide Fast Neutron Personnel Monitoring in India. With the present system of processing by elevated temperature electrochemical etching (ETECE) and evaluation using automatic image analysis, only 16 foils are processed at a time and it is useful over the dose equivalent range 0.2 mSv to 10 mSv. It has been reported that, by processing CR-39 of good detection efficiency by chemical etching at elevated temperature, more numbers of foils can be processed simultaneously. In the present study, CR-39 foils from Pershore Moulding (UK) have been chemically etched using 7 N KOH under various conditions of temperature and etching durations and evaluated using high magnification microscope. The duration of chemical etching, has been optimized at a constant temperature of 60°C for chemical etching process. The characteristics of the chemically etched CR-39 foils are compared with the characteristics of the CR-39 foils processed by the existing system of ETECE and the detailed results are presented in the full text of the paper. It has been observed that by chemical etching process, the dose equivalent range of CR-39 foils can be extended above 60 mSv.      

New parallel optimal‐parameter fast multipole method (OPFMM)

The three key translation equations of the fast multipole method (FMM) are deduced from the general polypolar expansions given earlier. Simplifications are introduced for the rotation‐based FMM that lead to a very compact FMM formalism. The optimum‐parameter searching procedure, a stable and efficient way of obtaining the optimum set of FMM parameters, is established with complete control over the tolerable error (ε). This new procedure optimizes the linear scaling with respect to the number of particles for a given ε. In addition, a new parallel FMM algorithm, which requires virtually no internode communication, is suggested that is suitable for the parallel construction of Fock matrices in electronic structure calculations. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1484–1501, 2001     

A Fast, Direct Algorithm for the Lippmann–Schwinger Integral Equation in Two Dimensions

The state-of-the-art, large-scale numerical simulations of the scattering problem for the Helmholtz equation in two dimensions rely on iterative solvers for the Lippmann–Schwinger integral equation, with an optimal CPU time O(m ³ log(m)) for an m-by-m wavelength problem. We present a method to solve the same problem directly, as opposed to iteratively, with the obvious advantage in efficiency for multiple right-hand sides corresponding to distinct incident waves. Analytically, this direct method is a hierarchical, recursive scheme consisting of the so-called splitting and merging processes. Algebraically, it amounts to a recursive matrix decomposition, for a cost of O(m ³), of the discretized Lippmann–Schwinger operator. With this matrix decomposition, each back substitution requires only O(m ² log(m)); therefore, a scattering problem with m incident waves can be solved, altogether, in O(m ³ log(m)) flops.     

Toeplitz预条件子的统一构造与性能分析

１．引言考虑线性方程组ＴＮｘ＝ｂ（１．１）其中ＴＮ＝（ｔｉ,ｊ）是ＮｘＮ对称正定（ＳＰＤ）Ｔｏｅｐｌｉｔｚ矩阵,即ｔｉ,ｊ＝ｔ｜ｉ－ｊ｜（ｉ,ｊ＝０,１,...,Ｎ－１）且ＴＮ的所有特征值均为正数,并表为ＴＮ：＝Ｔ（ｔ。,ｔｉ,...,ｔＮ－１）．如果我们用预条件子共轭梯度法（ＰＣＧ）求解方程组（１．１）,最关健的任务是构造出高效的预条件子．而预条件子最自然的选择似乎其逆矩阵易求且构成矩阵ＴＮ的某种最优逼近．由于循环矩阵ＣＮ的逆矩阵ＣＲ'仍为循环矩阵,因此ＣＮ和ＣＨ'与向量的乘积可通ｉｓ速Ｆｏｕｒｉｅｒ…