聚乙炔的CH面外振动红外光谱研究

采用从头计算方法，计算了反式和顺式聚乙炔的氢原子在垂直于聚乙炔分子面方向振动的红外光谱，计算表明，Gibson等用红外吸收实验所测得的谱线的确是聚乙炔的CH面外振动产生的谱线，经100℃长时间加热后，顺式聚乙炔变为反式聚炔，但波数为740cm^-1的谱级仍保留5％的强度。     

126Cs的高自旋态能级结构

利用融合蒸发反应¹¹⁶Cd(¹⁴N,4n)¹²⁶Cs布居了¹²⁶Cs的高自旋态.观测到了100多条新的γ跃迁和相应的能级,建立了双奇核¹²⁶Cs由9个转动带构成的能级纲图.尝试性地指定了大部分能级的自旋和宇称以及各转动带的Nilsson单粒子组态.极大地丰富了已有的实验结果.     

Spectroscopic studies of new model compounds for poly[N,N′-bis(phenoxyphenyl)pyromellitimide]

New model compounds for poly[N,N′-bis(phenoxyphenyl)pyromellitimide] have been synthesized in order to investigate the formation of imine bonds which are proposed to form during the curing process and lead to crosslinking in the bulk polymer. Raman studies show that terminal amines can react with imide carbonyls during curing to form C?N bonds. The Raman band due to C?N appears at 1656 cm^?1 and the band due to C?O closest to the imine bond is observed at 1742 cm^?1. These results are in agreement with previously published results on vapor deposited polyimide films.     

一维应变压缩下TC4钛合金绝热剪切研究

 利用内径为57 mm的压缩气炮，在撞击速度为0.2~1.2 km/s（相应的靶中压力为3~15 GPa）范围内进行对称碰撞实验，以研究TC4（Ti-Al6-V4）钛合金在一维应变冲击压缩条件下的绝热剪切现象。对回收得到的受冲击样品，在扫描电镜（SEM）下进行细观金相分析。结果指出，一维应变冲击压缩条件下，TC4钛合金中绝热剪切带产生的对称碰撞速度阈值为500 m/s（相当于样品中的压力为5.87 GPa）；主剪切带与冲击方向约为45°角，带上有圆形和椭圆形两种孔洞且随碰撞速度的增大而增多和长大，这是典型的韧性损伤特征。随碰撞速度增大，产生与主剪切带成15°角的支剪切带。这些与理论预言相符。X射线能谱分析结果指出，剪切带内材料发生了(α+β)→β相的转变，是典型的相变带。剪切带的温度估算与实验提供的信息吻合。     

全同超形变带转动惯量的粒子数守恒计算

利用推转壳模型的粒子数守恒方法计算了超形变(SD)转动带¹⁹²Hg和¹⁹⁴Hg(1,2,3)的带首转动惯量.分析了带首附近的组态结构及带首转动惯量随对力强度的变化.带首转动惯量之差δJ₀对对力强度十分敏感,而对Nilsson能级参数K、μ及形变参数并不敏感.对力及堵塞效应是造成带首转动惯量差别的主要因素.但与正常形变核相比,对力强度似有较大程度减弱.     

光子晶体的原理与应用

光子晶体是一种在微米、亚微米等光波长量级上折射率呈现周期性变化的介质材料，它使某些频率范围内的光子态密度大大降低．甚至完全形成光子禁带．本文介绍了光子晶体的原理、制备及应用．     

冲击载荷下剪切断裂研究

利用Hopkinson压杆技术对单边平行双裂纹试样倒向加载，在较大的加载率范围，对Ti6Al4V钛合金和40CrNiMoA两种材料的动态剪切断裂行为进行了研究．实验结果表明：存在两类韧性剪切断裂模式，即常规的韧性剪切型断裂和绝热剪切断裂．常规剪切型断裂模式的断裂韧性KⅡd随加载率的提高而增大，而绝热剪切型的断裂韧性KⅡd则随加载率的提高而减小，并且，当加载率增大至某一临界值时，常规的韧性剪切断裂模式将转变为绝热剪切断裂破坏模式．     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

A method for determining optical constants, dimensions, and concentrations of “soft” absorbing particles in the brightening band region

We investigate the possibilities of creating a method for estimating the optical constants, dimensions, and concentrations of “soft” absorbing particles by applying a theoretical analysis of the angular dependence of the intergrated indicatrix, overall characteristics of light scattering, and absorption on the phase shift and diffraction parameter of particles in the brightening band region. We show that using the investigated optical characteristics, it is possible to determine the unknown parameters of a suspension from experimental data. Institute of Biophysics, Siberian Branch of the Russian Academy of Sciences, Akademgorodok, Krasnoyarsk, 660036, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 6, pp. 807–812, November–December, 1997.     

布里渊区内能带E(k)=E(-k)的对称性

说明了布里渊区内能带Ｅ（ｋ）＝Ｅ（－ｋ）的对称性是时间反演对称性的结果，而与晶体的空间对称性无关．并且证明了当晶体具有中心反演对称性时，布里渊区内能带是二重简并的．