Evaluation of the parameters of the Bender equation of state for low acentric factor fluids and carbon dioxide

Volumetric properties of several low acentric factor fluids (Ar, CH₄, C₂H₆, Kr, N₂, Ne, O₂, Xe) as well as CO₂ are modeled using the Bender equation of state. This equation is a linear function of 19 adjustable parameters, which are evaluated from properties data, using a linear numerical procedure. The validity of the EOS is tested by calculating the Joule-Thomson inversion curve. A simple model is in particular used to correlate the inversion properties predicted by the Bender equation, expressed in term of reduced pressure as a function of reduced temperatures ranging from 0.8 to 6. The simple correlation reproduces accurately the used data. We employ data on state behaviour ρ(P,T) of homogeneous fluid phases, vapour-liquid equilibrium, second virial coefficient and the coordinates of the critical point.     

极性和非极性溶剂在聚乙烯中的无限稀释扩散系数的测定

 气相法研究小分子溶剂与高分子聚合物材料之间的相互作用是一个快速、准确、方便的方法 ,可以测量多种小分子溶剂在聚合物中的溶解、扩散参数。通过气相法测定了 5种小分子溶剂 (正己烷、正庚烷、正癸烷、乙醇和水 )在固定液聚乙烯中的保留时间和半峰宽 ,运用vanDeemter模型进行数据处理 ,得到上述 5种小分子在聚乙烯中的无限稀释扩散系数 ,获得了十分有意义的结果。     

Percolation behaviour of ultrahigh molecular weight polyethylene/multi-walled carbon nanotubes composites

The electrical conductivity of polymer/multi-walled carbon nanotubes (MWCNTs) composites in a powder and in a hot-pressed compacted state, prepared by mechanical mixing, was studied. The semicrystalline ultrahigh molecular weight polyethylene (UHMWPE) was used as a polymer matrix. The data clearly evidence the presence of a percolation threshold φ_c at a very small volume fraction of the MWCNTs φ in a polymer matrix, φ_c ≈ 0.0004-0.0007. The ultralow percolation threshold in UHMWPE/MWCNTs thermoplastic composites was explained by high aspect ratio of the nanotubes and their segregated distribution inside the polymer matrix. The method of composite preparation effects the values of percolation threshold concentration φ_c and critical exponent t. A noticeable positive temperature coefficient of resistivity (PTC effect) was observed in the region of temperatures higher than melting point. It was explained by influence of thermal expansion of the polymer matrix and independence from the melting process that is a result of specific structure of conductive phase.     

Diffusion in dilute aqueous acetic acid solutions at 25°C

A conductimetric technique has been used to measure diffusion coefficients for aqueous solutions of acetic acid at concentrations from 0.002 to 0.02 mol-dm^–3 at 25°C. The acetic acid component diffuses more rapidly at lower concentrations where a higher proportion of the slower acid molecules are converted by dissociation to acetate ions and highly mobile hydrogen ions. The observed concentration dependence of the diffusion coefficient verifies the limiting law for weak electrolyte diffusion. A new type of conductimetric diffusion cell with several practical advantages over earlier designs is described together with an improved procedure for the conductimetric determination of accurate diffusion coefficients for weak electrolyte systems.     

273.15 K下Li2B4O7-LiCl-H2O体系热力学性质的等压研究及离子作用模型

用等压法研究了273.15 K下Li₂B₄O₇-LiCl-H₂O体系不同质量摩尔浓度分数的等压平衡浓度和水活度; 计算了LiCl和Li₂B₄O₇混合盐溶液的渗透系数等热力学性质. 用273.15 K下的实验数据对Pitzer离子相互作用模型进行了参数化研究, 拟合求取了273.15 K下Pitzer离子相互作用参数, 用获得的参数计算了LiCl和Li₂B₄O₇在Li₂B₄O₇-LiCl-H₂O体系中的活度系数. 273.15 K下由相应的Pitzer模型计算的渗透系数值与实验结果一致. 这对完善含锂、硼盐湖卤水体系的热力学模型具有重要意义.     

Osmotic coefficients of vinylic polyelectrolyte solutions without added salt

 The osmotic pressures of –polyelectrolyte solutions without added salt was measured in the concentration ranges 0.001–0.02 and 0.2–1.9 mol kg^-1. Our results show that the osmotic coefficients φ_p were strongly dependent on the chemical structures of polyelectrolyte through the polyion radius and the interaction between the ionic moiety and counterions. The osmotic pressures in polyelectrolyte solutions without added salt, calculated on the basis of the counterion contribution, are in agreement with the experimental results. We conclude that the counterion contribution is dominant in the osmotic pressures and thus, the polymer contribution is negligible in the examined concentration range 0.2–1.9 mol kg^-1. The P–B approach gave a fair prediction of the absolute values of the osmotic pressures with λ=4.5, where λ is the charge density parameter, except for NaPA. In other words, the concentration dependence of the φ_p values can be explained in terms of the counterion contribution. Received: 11 June 1997 Accepted: 19 August 1997     

Dependence of the activity of a rhizopus lipase on microemulsion composition

Enzymatic hydrolysis of a model triglyceride, palm oil, was carried out with lipase fromRhizopus sp. in microemulsions with varying water content. The microemulsions were based on a nonionic surfactant, pentaethylene glycol monododecyl ether (C12 EO5), buffered water solution and an oil component consisting of isooctane and palm oil at a weight ratio of 20:1. The structure of the microemulsions was characterized using Fourier transform pulsed-gradient spin-echo¹H NMR. The rate of reaction decreased as the water content of the reaction medium was increased. The self-diffusion coefficient of water, D_w was found to be constant within the interval 1–20% water. The difference in reactivity is believed to be due to a difference in structure of the palisade layer between water and hydrocarbon microdomains. The nonionic surfactant was demonstrated to be unsuitable for enzymatic reactions since only partial hydrolysis was obtained in all experiments. The surfactant, however, did not cause enzyme deactivation, even at very high concentrations.     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and CO groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

Influence of a water vapor admixture in the carrier gas on capacity coefficients of polar organic compounds

The influence of a water vapor admixture in helium, nitrogen, and carbon dioxide on capacity coefficients of C₃−C₅ alcohols and pyridine during chromatography process in capillary columns with polar (PEG-20M) and nonpolar (SE-30) stationary phases was studied. The introduction of a water admixture into the carrier gas, increases the capacity coefficient of polar organic compounds on the capillary column with PEG-20M and has almost no effect on this value in the case of SE-30. The change in retention of polar organic compounds on the capillary column with the PEG-20M polar phase occurs due to a change in the properties of the stationary phase when it adsorbs water from the mobile phase. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2258–2261, November, 1998.     

Rate Coefficient for Self-Association Reaction of CF2 Radicals Determined in the Afterglowof Low-Pressure C4F8 Plasmas

We have analyzed decay kinetics of CF₂ radicals in the afterglow of low-pressure, high-density C₄F₈ plasmas. The decay curve of CF₂ density has been approximated by the combination of first- and second-order kinetics. The surface loss probability evaluated from the frequency of the first-order decay process has been on the order of 10^–4. This small surface loss probability has enabled us to observe the second-order decay process. The mechanism of the second-order decay is self-association reaction between CF₂ radicals (CF₂+CF₂C₂F₄). The rate coefficient for this reaction has been evaluated as (2.6–5.3)×10^–14 cm³/s under gas pressures of 2 to 100 mTorr. The rate coefficient was found to be almost independent of the gas pressure and has been in close agreement with known values, which are determined in high gas pressures above 1 Torr.