Thermal Effects of Microwave Energy in Agricultural Soil Radiation

The thermal treatment by millimeter waves for the soil disinfection can be one possible alternative to chemical treatments. This physical method is based on incrementing the soil temperature and its pathogens irradiating with high frequency electromagnetic waves. So the previous knowledge of the temperature distribution in the irradiated soil is essential for achieving an effective bad microorganism and weed seeds elimination. This report analyse the heating kinetic and spatial distribution of the maximum temperatures reached by the soil. It is presented a mathematic model about how are distributed the reached temperatures in the depth of the irradiated soil. This model concludes that when an orchard soil is irradiated superficially by microwaves, the microwaves have a big attenuation due to the soil dielectric properties and the water located in the pores of the most superficial layer. This fact causes a shield effect blocking the waves penetration in few centimetres. The heating by radiation is reduced to the superficial layer. The heating propagation in the depth is occurred by conduction following the Fourier equations.     

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

二分量高温超导机理

用两种电子态,讨论了金属—绝缘相变、反铁磁性—金属相变,以及相分离、正常态—超导态相变、非费米液体行为、高Tc等 关键词： 两种电子态 格林函数 玻色化 高温超导     

微型热驱动热声热机热端换热器的优化设计

该文基于热声环境,采用厘米级扁管和deltaE数值计算对微型热声换热器进行了优化设计。     

荧光光谱法研究蛋白质构象的电磁-温度协同效应

长期以来电磁生物效应受到人们普遍关注，近年来从各个角度进行了相关研究。电磁－温度协同效应是当前的热点。本研究通过电磁场及温度协同对蛋白质影响的研究，发现蛋白质在电磁场作用下的不可逆变性，而且这种变性也遵循Arrhenius规律，并进一步得出电磁－温度协同作用的蛋白质变性模型。本文从分子反应动力学的角度解释了电磁－温度协同效应，并对非热效应作了一定的探讨。     

Spectroscopy of the regenerative soot

The mechanisms and processes of the formation of the regenerative soot in a graphite hollow cathode discharge that produces and emits carbon clusters are presented. Mass spectrometry with a specially designed E×B velocity filter analyzes the entire range of the charged clusters from C ₁ to ∼C ₄₃₀₀. The state of the carbon vapour within the source is evaluated by using the characteristic line emissions from the carbonaceous discharge whose formative mechanisms depend upon the kinetic and potential sputtering of the sooted cathode. The carbonaceous discharge generates atomic and ionic C and its clusters C _m (m≥ 2), noble gas metastable atoms and ions, energetic electrons and photons in the cavity of the graphite hollow cathode. The parameters of soot formation and its recycling depend critically on the discharge parameters, the geometry of the hollow cathode and 3D profile of the cusp magnetic field contours. Received 2nd July 2001 and Received in final form 10 September 2001     

高温超导薄膜微波非线性研究的进展

文章介绍了高温超导薄膜微波非线性的主要特征，阐述了高温超导薄膜微波非线性产生的原因和相关的研究现状，指出了高温超导薄膜非线性研究中遇到的困难和尚未解决的问题．     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

The excited states of pyrazine: A basis set study

Summary Multiconfigurational second order perturbation theory (CASSCF/CASPT2) has been used to investigate the dependence of computed valence excitation energies and transition moments on the basis sets. Pyrazine has been selected as the test molecule. Atomic normal orbital (ANO) type basis sets are used throughout. Contractions of the structure (4s3p1d/2s) are found to be an optimal compromise between the quality and the size of the calculations and are capable of yielding results virtually identical to more extended basis sets.