腔靶等离子体辐射温度空间分布测量

本文描述了用膜吸收法测量激光等离子体辐射温度空间分布的原理和方法给出了柱形缝靶轴向辐射温度随空间位置变化的特征,对测量结果进行了分析讨论。     

Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。     

应变Si1-xGex层中p型杂质电离常温和低温特性

本文采用解析的方法计算了应变Si1-xGex层中p型杂质电离度与Ge组分x、温度T以及掺杂浓度N的关系.发现常温时,在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度的先变小,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加先变大,而后几乎不变;重掺杂时,杂质电离能变为0后,杂质电离度为1.低温下,轻掺杂时,载流子低温冻析效应较为明显,杂质的电离度普遍较小,当掺杂浓度大于Mott转换点时,载流子冻析效应不再明显,电离率迅速上升到1.在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度先变小,后变大,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加变大;重掺杂时,杂质电离能变为0后,杂质电离度为1.     

Thermal Effects of Microwave Energy in Agricultural Soil Radiation

The thermal treatment by millimeter waves for the soil disinfection can be one possible alternative to chemical treatments. This physical method is based on incrementing the soil temperature and its pathogens irradiating with high frequency electromagnetic waves. So the previous knowledge of the temperature distribution in the irradiated soil is essential for achieving an effective bad microorganism and weed seeds elimination. This report analyse the heating kinetic and spatial distribution of the maximum temperatures reached by the soil. It is presented a mathematic model about how are distributed the reached temperatures in the depth of the irradiated soil. This model concludes that when an orchard soil is irradiated superficially by microwaves, the microwaves have a big attenuation due to the soil dielectric properties and the water located in the pores of the most superficial layer. This fact causes a shield effect blocking the waves penetration in few centimetres. The heating by radiation is reduced to the superficial layer. The heating propagation in the depth is occurred by conduction following the Fourier equations.     

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.     

微型热驱动热声热机热端换热器的优化设计

该文基于热声环境,采用厘米级扁管和deltaE数值计算对微型热声换热器进行了优化设计。     

Spectroscopy of the regenerative soot

The mechanisms and processes of the formation of the regenerative soot in a graphite hollow cathode discharge that produces and emits carbon clusters are presented. Mass spectrometry with a specially designed E×B velocity filter analyzes the entire range of the charged clusters from C ₁ to ∼C ₄₃₀₀. The state of the carbon vapour within the source is evaluated by using the characteristic line emissions from the carbonaceous discharge whose formative mechanisms depend upon the kinetic and potential sputtering of the sooted cathode. The carbonaceous discharge generates atomic and ionic C and its clusters C _m (m≥ 2), noble gas metastable atoms and ions, energetic electrons and photons in the cavity of the graphite hollow cathode. The parameters of soot formation and its recycling depend critically on the discharge parameters, the geometry of the hollow cathode and 3D profile of the cusp magnetic field contours. Received 2nd July 2001 and Received in final form 10 September 2001     

Effect of distortion in electron impact excitation in Coulomb-projected Born approximation

We have calculated total and differential cross-sections for 1s →ns (n = 2, 3, 4) electron impact excitation of hydrogen and hydrogenic ions at various energies in Coulomb-projected Born approximation. Distortion due to static interactions, target polarization and exchange effects has been incorporated in the initial channel. The present calculations have been compared with other theoretical and experimental results.     

Exact solutions and geometric phase factor of time-dependent three-generator quantum systems

There exist a number of typical and interesting systems and/or models, which possess three-generator Lie-algebraic structure, in atomic physics, quantum optics, nuclear physics and laser physics. The well-known fact that all simple 3-generator algebras are either isomorphic to the algebra sl (2, C) or to one of its real forms enables us to treat these time-dependent quantum systems in a unified way. By making use of both the Lewis-Riesenfeld invariant theory and the invariant-related unitary transformation formulation, the present paper obtains exact solutions of the time-dependent Schr?dinger equations governing various three-generator Lie-algebraic quantum systems. For some quantum systems whose time-dependent Hamiltonians have no quasialgebraic structures, it is shown that the exact solutions can also be obtained by working in a sub-Hilbert-space corresponding to a particular eigenvalue of the conserved generator (i.e., the time-independent invariant that commutes with the time-dependent Hamiltonian). The topological property of geometric phase factors and its adiabatic limit in time-dependent systems is briefly discussed. Received 6 July 2002 / Received in final form 21 October 2002 Published online 11 February 2003