Depth profiling of latex blends of fluorinated and fluorine‐free acrylates with laser‐induced secondary mass spectrometry

We explored phase separation and self‐assembly of perfluoroalkyl segments at the surface of polymer films obtained from latices of semifluorinated acrylate copolymers and the corresponding latex blends of nonfluorinated and semifluorinated polyacrylates. With laser‐induced secondary mass spectrometry the fluorine distribution was measured after annealing above the minimum film‐forming temperature of the polymers up to a depth of several micrometers. Depth profiles of a semifluorinated acrylate homopolymer and latex blends thereof with fluorine‐free alkylacrylates with 25, 50, and 75 mol % semifluorinated acrylate as well as a copolymer comprised of alkyl acrylate and semifluorinated acrylate (50/50 mol %) were investigated. In the case of latex blends containing both semifluorinated polyacrylates and fluorine‐free or low‐fluorine polymers, self‐assembly accounted for enrichment of the perfluoroalkyl segments at the surface. Coatings exhibiting low surface energy and having a substantially reduced total fluorine content were obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 360–367, 2003     

Studies on the Plasma Shielding of 1.06μm Laser on the Aluminum Target

ＳｔｕｄｉｅｓｏｎｔｈｅＰｌａｓｍａＳｈｉｅｌｄｉｎｇｏｆ１．０６μｍＬａｓｅｒｏｎｔｈｅＡｌｕｍｉｎｕｍＴａｒｇｅｔＬＵＪｉａｎ；ＮＩＸｉａｏｗｕ；ＨＥＡｎｚｈｉ（ＤｅｐａｒｔｍｅｎｔｏｆＡｐｐｌｉｅｄＰｈｙｓｉｃｓ，ＮａｎｊｉｎｇｏｆＳｃｉｅｎｃ...     

Mixing properties of mim diodes in the infrared

Point contact MIM diodes of different materials have been tested as harmonic mixers at 29 THz and 88 THz. From the analysis of the I-V static characteristic quantitative informations have been obtained about the effectiveness of the diodes as high order mixers.     

Experimental and computational studies of intracomplex reactions in Mg+(primary, secondary alkylamine) complexes induced by photoexcitation of Mg+

We report herein a comprehensive study of photoinduced reactions in complexes of Mg+ with primary (n-propyl- and isopropylamine) and secondary amines (dipropyl- and diisopropylamine) in the spectral range of 230-440 nm. Similar to the methyl- and ethylamine complexes studied previously, N-H bond activation of these complexes is very unfavorable. Instead, the C(alpha)-C, C-N, and C(alpha)-H bond-cleavage photoproducts are observed after photoexcitation of the Mg+ complexes (3(2)P<--3(2)S). For Mg+(primary amine) complexes, for example, Mg+-NH2CH2CH2CH3, and Mg+-NH2CH(CH3)2, the photoproducts resulting from C(alpha)--C rupture prevail after P(z) and charge-transfer excitations, whereas the Mg+ photofragment is predominant upon P(x,y) excitation. However, with further N-alkyl substitution, as in Mg+(secondary amine) complexes, for example, Mg+-NH(CH2CH2CH3)2 and Mg+-NH[CH(CH3)2]2, a novel intracomplex C-C coupling photoreaction dominates on P(x,y) excitation of Mg+, which is believed to arise from Mg+* insertion into the C-N bond. With P(z) and charge-transfer excitation, the Mg-R elimination photoproducts, arising from C(alpha)-C bond cleavage, predominate. The energetics and possible mechanisms of the intracomplex photoreactions are analyzed in detail with the help of extensive quantum mechanics calculations.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.     

Nonstationary Markov chains and convergence of the annealing algorithm

We study the asymptotic behavior as timet + of certain nonstationary Markov chains, and prove the convergence of the annealing algorithm in Monte Carlo simulations. We find that in the limitt + , a nonstationary Markov chain may exhibit phase transitions. Nonstationary Markov chains in general, and the annealing algorithm in particular, lead to biased estimators for the expectation values of the process. We compute the leading terms in the bias and the variance of the sample-means estimator. We find that the annealing algorithm converges if the temperatureT(t) goes to zero no faster thanC/log(t/t ₀) ast+, with a computable constantC andt ₀ the initial time. The bias and the variance of the sample-means estimator in the annealing algorithm go to zero likeO(t^–1+) for some 0<1, with =0 only in very special circumstances. Our results concerning the convergence of the annealing algorithm, and the rate of convergence to zero of the bias and the variance of the sample-means estimator, provide a rigorous procedure for choosing the optimal annealing schedule. This optimal choice reflects the competition between two physical effects: (a) The adiabatic effect, whereby if the temperature is loweredtoo abruptly the system may end up not in a ground state but in a nearby metastable state, and (b) the super-cooling effect, whereby if the temperature is loweredtoo slowly the system will indeed approach the ground state(s) but may do so extremely slowly.     

Miniature electrophoresis for speed and productivity

Attempts to miniaturize electrophoresis (EP) to save time or enhance productivity and efficiency remains a challenge for science and industry. Other advantages of miniaturization include: increased sensitivity, saving of reagents, greater yield of data, and enabling studies where only small samples are available. Since electrophoresis that takes hours may be reduced to a matter of minutes, the limitations of miniaturization in clinical, industrial, and research applications are evaluated. Clinical electrophoresis (EP) on cellulose acetate media can be performed in 3.5 min instead of 20–45 min and on SDS polyacrylamide gels in 15–30 min compared with conventional 3–8 h.     

The Photopolymerization Kinetics of Acryl amide Sensitized with Toluidine Blue-Alcoholamine Induced by He-Ne Laser

Toluidine blue(TB) is a good sensitizer for the polymerization of acrylnmide(AM) induced by He-Ne laser. With TB as a sensitizer and various alcoholamine as donors, the photoredox of TB and the polymerization kinetics of AM induced by He-Ne laser were investigated. It was found that either for the photoredox of TB or for the polymerization of AM, the activity of alcoholamine increases in the order of EOA相似文献   

Mechanism of silicon film deposition in the RF plasma reduction of silicon tetrachloride

Plasma-chemical reduction of SiCl₄ in mixtures with H₂ and Ar has been studied by optical emission spectroscopy (OES) and laser interferometry techniques. It has been found that the Ar:H₂ ratio strongly affects the plasma composition as well as the deposition (r _D) and etch (r _E) rates of Si: H, Cl films and that the electron impact dissociation is the most important channel for the production of SiCl_x species, which are the precursors of the film growth. Chemisorption of SiCl_x and the reactive surface reaction SiCl_x+H–SiCl_(x–1)0+HCl are important steps in the deposition process. The suggested deposition model givesr _D [SiCl_x][H], in agreement with the experimental data. Etching of Si: H, Cl films occurs at high Ar: H₂ ratio when Cl atoms in the gas phase become appreciable and increases with increasing Cl concentration. The etch rate is controlled by the Cl atom chemisorption step.