Influence of superalloy substrate roughness on adhesion and oxidation behavior of magnetron-sputtered NiCoCrAlY coatings

The present study has been conducted in order to determine the influence of superalloy substrate roughness on adhesion and oxidation behavior of magnetron-sputtered NiCoCrAlY coatings. Six types of coating samples with different substrate roughness were tested. The surface roughness and real surface area of both the substrates and coatings were studied by atomic force microscopy (AFM) techniques. The scratch tests performed at progressive loads were employed to evaluate the adhesion of the coatings. Cyclic oxidation tests were performed at 1100 °C in air for 50 cycles, each cycle consisting of 1 h heating in the tube furnace followed by 15 min cooling in the open air. The AFM measurements exhibit that the surface roughness of the sputtered NiCoCrAlY coating increases with the increasing of the superalloy substrate roughness. The NiCoCrAlY coatings present slightly lower roughness than the corresponding superalloy substrate. The scratch adhesion tests indicate that the coatings on substrates with a smoother surface possess better adhesion than on those with a rougher surface. Both the real surface area and oxidation weight gain of the coatings decrease with the decreasing of the superalloy substrate roughness. The NiCoCrAlY coating sputtered on the superalloy substrate with lower roughness provides relatively higher antioxidant protection than that provided by the coating with rougher substrate.     

Loschmidt echo of a central spin coupled to an XY spin chain: Role of three-site interaction

Effects of two types of three-site interaction, i.e., XZX+YZY and XZY−YZX, on Loschmidt Echo (LE) of a central spin coupled to an XY spin chain are studied. The dynamical evolution behaviors of the LE are investigated analytically and numerically. The XZX+YZY type of three-site interaction (α₁) can shift the critical points of the magnetic field λ. At the critical points |λ−α₁|=1, the decay of the LE is enhanced. The role of the XZY−YZX type of three-site interaction (α₂) depends on its strength. In some specific intervals, α₂ can remarkably delay the decay of the LE.     

Field history dependence of nonlinear dielectric properties of Ba0.6Sr0.4TiO3 ceramics under bias electric field: Polarization behavior of polar nano-regions

Nonlinear dielectric properties of Ba_0.6Sr_0.4TiO₃ ceramics prepared by citrate method were investigated under bias electric field with respect to field history. X-ray diffraction analysis and temperature dependence of the dielectric constant (ε_r) confirmed a macroscopically paraelectric state for the specimen at room temperature. A slim polarization versus electric field (P-E) hysteresis loop of the specimen at room temperature indicated the existence of polar nano-regions (PNRs) superimposed on the paraelectric background. The nonlinear dielectric properties in continuous cycles of bias field sweep displayed a strong sensitivity to the field history. This phenomenon was qualitatively explained in terms of an irreversible polarization evolution of the PNRs under the bias fields. A considerable decline of the tunability with the cycle number suggests an appreciable contribution of the PNRs to the dielectric nonlinearity. The polarization and size of the PNRs were determined by fitting the dielectric constants to a multipolarization mechanism model.     

非线性发展方程的Riemann theta 函数等几种新解

为了构造非线性发展方程的复合型无穷序列精确解, 获得了第二种椭圆方程的Riemann theta 函数等几种新解.在此基础上,利用第二种椭圆方程与Riccati方程的Bäcklund变换和解的非线性叠加公式, 借助符号计算系统 Mathematica, 以mKdV方程为应用实例, 构造了该方程的复合型无穷序列新精确解.这里包括Riemann theta 函数、Jacobi椭圆函数、双曲函数、 三角函数和有理函数,通过几种形式构成的复合型无穷序列新精确解. 关键词： 第二种椭圆方程 Riccati方程 非线性发展方程 Riemann theta 函数无穷序列解     

三核铁甲酸簇合物[Fe_3(μ_3-O)(μ-O_2CH)_6(H_2O)_2(O_2CH)]·2H_2O在乙炔、水汽体系中的反应行为

本文研究了[Fe_3(μ_3-O)(μ-O_2CH)_6(H_2O)_2(O_2CH)]·2H_2O(简称)在乙炔、水汽体系中的反应行为。发现当温度高于220℃,脱落部分配体的具有活化乙炔进行加成反应的性能。采用原位红外光谱法和气相色谱法对此反应过程进行了跟踪探索,报道了产物的定性及半定量结果。     

介观RLC并联电路量子效应

研究了介观RLC并联电路系统量子态随时间的演化，结果表明，在外加电源作用下，有耗散的RLC并联电路，系统将由初始的真空态演化到压缩态。     

Effects of the primary recoil spectrum on long-range migration of defects

Abstract

For quantitative predictions and comparisons of microstructures that evolve during exposure to different radiation environments at elevated temperature one needs to develop methods that go beyond those based on the number of displacements per atom. The number of freely migrating defects that contribute to the microstructural development is far less than the total number of defects produced, as has been recognized for some time from measurements of radiation-induced segregation and of radiation-enhanced diffusion. Defect production in various neutron and ion irradiation environments is discussed in light of this fact. A method to calculate the fraction of freely migrating defects from the cluster size distribution of defects produced in cascades is suggested. The results are in good agreement with available data.     

Study of defect evolution by TEM with in situ ion irradiation and coordinated modeling

The paper describes a novel transmission electron microscopy (TEM) experiment with in situ ion irradiation designed to improve and validate a computer model. TEM thin foils of molybdenum were irradiated in situ by 1?MeV Kr ions up to ～0.045 displacements per atom (dpa) at 80°C at three dose rates ?5?×?10^?6, 5?×?10^?5, and 5?×?10^?4?dpa/s – at the Argonne IVEM-Tandem Facility. The low-dose experiments produced visible defect structure in dislocation loops, allowing accurate, quantitative measurements of defect number density and size distribution. Weak beam dark-field plane-view images were used to obtain defect density and size distribution as functions of foil thickness, dose, and dose rate. Diffraction contrast electron tomography was performed to image defect clusters through the foil thickness and measure their depth distribution. A spatially dependent cluster dynamic model was developed explicitly to model the damage by 1?MeV Kr ion irradiation in an Mo thin foil with temporal and spatial dependence of defect distribution. The set of quantitative data of visible defects was used to improve and validate the computer model. It was shown that the thin foil thickness is an important variable in determining the defect distribution. This additional spatial dimension allowed direct comparison between the model and experiments of defect structures. The defect loss to the surfaces in an irradiated thin foil was modeled successfully. TEM with in situ ion irradiation of Mo thin foils was also explicitly designed to compare with neutron irradiation data of the identical material that will be used to validate the model developed for thin foils.