辐照对聚己内酯结构和性能的影响

研究了γ 辐照对不同分子量的聚己内酯 (PCL)的力学性能、热性能、结晶行为的影响 ,在此基础上 ,研究了辐射交联后的PCL的形状记忆行为 .研究结果表明 ,PCL的分子量越大 ,辐射交联所需的凝胶化剂量越低 .溶胶分数S +S1 2 与 1 D的关系很好地符合Charlesby Pinner关系式 ,说明PCL的辐射交联属于无规交联 .剂量对PCL的力学性能影响显著 ,剂量越大 ,抗张强度和断裂伸长率下降越多 ,但分子量较高的PCL的抗张强度受剂量的影响较小 .DMA分析表明 ,聚己内酯辐照交联后的弹性模量和耐热性能显著提高 .交联度较高的PCL表现出高弹态 ,可以拉伸 ,并具有较好的形状记忆行为 .DSC分析表明 ,辐射交联使PCL的结晶度有所增加 ,但也使结晶熔点有所降低     

碳点增强的Ru纳米颗粒复合材料用于碱性条件下高效电解水析氢

In the 21st century, hydrogen energy is a novel energy source. Its use is expected to mitigate the problems of environmental pollution and global warming caused by the excessive use of conventional fossil fuels. The hydrogen evolution reaction (HER) for water splitting has attracted considerable attention because of its environmental friendliness. To improve electrocatalyst performance and reduce operation cost, carbon-based metal hybrid materials exhibiting high efficiency and catalytic activity have been developed. Among them, carbon dots (CDs) have garnered significant research attention and have been widely applied in biosensing, bioimaging, and energy conversion/storage because of their facile synthesis, biocompatibility, tunable photoluminescence, excellent stability, and good electronic properties. CDs are widely used as carriers in the construction of electrocatalysts prepared from carbon-based metal hybrid materials. At present, it is believed that CDs exhibit excellent confinement effects, which can effectively inhibit the growth and agglomeration of metal nanoparticles, thereby preparing well-distributed carbon-based metal hybrid materials with a uniform and controllable size. However, the formation process of the small-molecule raw materials of CDs has not been elucidated. In this study, CDs and small-molecule raw materials from synthetic CDs were used as precursors to prepare nitrogen-doped CD-supported ruthenium nanoparticle (Ru@CDs) and small-molecule-supported ruthenium nanoparticle (Ru@Molecule) hybrid materials, respectively. The interaction between the small molecules and Ru in the process of CD formation and the effect on HER performance were explored. Moreover, we prepared different carriers such as metal organic frameworks(MOF), carbon nanotubes (CNTs), and graphene (GO)-supported ruthenium nanoparticle hybrid materials. Among them, Ru@CDs exhibited controllable size and excellent dispersibility and exhibited outstanding HER activity and good stability. Ru@CDs were found to require a low overpotential of 22 mV to reach a current density of 10 mA·cm⁻². Moreover, we observed the presence of an intermediate state between the molecules and CDs and demonstrated that the intermediate state exhibits no confinement effect. Furthermore, we found that with increasing calcination temperature, the intermediate state gradually changes to CDs. The unique spatial confinement between CDs and metal ions is key to the formation of monodisperse Ru nanoparticles. Our results confirmed that Ru@CDs serve as excellent HER catalyst supports. This work not only reveals the effect of the unique spatial confinement of CDs on the supported metals and their promoting effect on electrocatalytic activity but also provides guides the future development of CD-based metal hybrid electrocatalysts.     

Interfacial tension and fluorine evolution on a carbon anode

During electrolysis of molten KF-2HF, strongly adherent fluorine bubbles are generated at the surface of carbon anode. The current was passing even if the horizontal anode was fully covered with gas film. The formation and growth of gas bubbles were studied by transient electrochemical techniques. It was observed that the fluorine bubbles do not have the spherical cap shape predicted by the classical theory. The curvature radius of the interface profile is not constant, the edge of the bubble being flat with a contact angle close to zero. The results are interpreted in the frame of a model which takes into account the predominant role of the interfacial properties.     

Computer simulation of conformational movement based on interconversion phenomena

A computer method has been developed which is an alternative to molecular dynamics in the sense that it pictures conformational motion. It simulates propagation in conformational movement based on conformational interconversion phenomena. The method starts with the knowledge of the topology of the conformational potential energy hyper-surface, which is described by the minima and the transition states. The topology is obtained by the recently described software . The simulation of conformational motion is based on the Boltzmann statistics of movement between the minima and the transition states at a given temperature. The method is illustrated for methyl--glucopyranoside and - -galNAc(1-3)[- -Fuc(1-2)]Gal-O-Me molecules. Conformational transitions of hydroxyl groups as well as glycosidic linkages are discussed.     

Shot noise sets the limit of quantification in electrochemical measurements

Detection of single molecules, particles, and rapid redox events is a challenge of electrochemical investigations and requires either an amplification strategy or significant averaging for the electrochemical current to exceed the noise level. We consider the minimum number of electrons required to reach the limit of quantification in these electrochemical measurements. A survey of the literature indicates that the state-of-the-art limit in current detection for different types of measurements (e.g. voltammetry, single-molecule redox cycling, ion channel recordings of single molecules, metal nanoparticle collision, and phase nucleation) is independent of the nature of the measurement and increases linearly with reciprocal response time, Δt^?1, over ～5 orders of magnitude (from ～10 to ～10⁶ s^?1). We demonstrate that the practical limit of quantification requires cumulative measurement of ～2100 electrons during Δt and is determined by statistics of counting electrons, that is, the shot noise in the current.     

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响王卫华，贝建中，王智峰，王身国（中国科学院化学研究所北京１０００８０）关键词聚己内酯聚醚嵌段共聚物，共混物，电子能谱，表面性质，药物释放行为聚己内醋（ＰＣＬ）具有优良的药物通透性和生物相容...     

Voltammetric Behavior of Water‐Soluble Endohedral Metallofullerene Derivatives

Voltammetric behavior of water‐soluble endohedral metallofullerene derivatives Gd@C₈₂(OH)₅(NHCH₂COOH)₉ (GN) and Gd@C₈₂(OH)₆(NHCH₂CH₂SO₃H)₈ (GS) was characterized in 0.1 M KCl solution by CV and DPV. They showed similar redox behavior, that is, a reversible electroreduction process on HMDE was found; in the mean time, an irreversible oxidation process and an irreversible reduction process on GC electrodes were also observed. The results reveal that these two water‐soluble endohedral metallofullerene derivatives have good electron donating ability and poor electron accepting ability due to hydroxy groups, aminoacetic acid and aminoethyl sulfonic acid connected to the C₈₂ cage in comparison with Gd@C₈₂.     

Zur Struktur und Reaktivität des Diammoniumhexafluoromanganats(IV)

About the Structure and Reactivity of Diammonium Hexafluoromanganate(IV) Electrolytic oxidation of an aqueous suspension of MnF₂ containing NH₄F, and subsequent crystallization in 40% HF yields yellow crystals of (NH₄)₂MnF₆. It crystallizes in the hexagonal K₂MnF₆ type structure with the space group P6₃mc and a = 5.903; c = 9.565 Å; Z = 2. With in situ powder diffraction studies it is shown, that (NH₄)₂MnF₆ is gradually reduced in a NH₃ atmosphere between 30 and 230 °C to afford (NH₄)₃MnF₆, (NH₄)₂MnF₅, and finally NH₄MnF₃. (NH₄)₃MnF₆, thereby, forms a hitherto unknown cubic (a = 9.082 Å) high temperature modification with the cryolite type structure. Under N₂ the thermal decomposition of (NH₄)₂MnF₆ proceeds via NH₄MnF₄ to yield MnF₂.     

超高交联吸附树脂吸附对硝基苯乙酮的热力学研究

比较两种超高交联聚苯乙烯吸附树脂NJ-8、AM-1与Amberlite XAD-4(以下简称XAD-4)对对硝基苯乙酮的静态吸附行为，根据吸附等温线研究了吸附热力学性质．在298～318K和研究的浓度范围内，NJ-8，AM-1、XAD-4对对硝基苯乙酮的吸附平衡数据符合Freundlich吸附等温方程．结果表明：吸附为放热过程，适当降低温度有利于吸附．计算了对硝基苯乙酮在NJ-8，AM-1、XAD-4树脂上的吸附焓变、自由能变，吸附熵变．对吸附行为作了合理的解释。     

Mixtures of branched non-ionic oligo-oxyethylene surfactants in aqueous solutions — the effect of molecular geometry on LC phase behaviour 4

The LC phase behavior of ternary mixtures of the two corresponding branched non-ionic surfactants 1,3-bis-(methoxy-tetraoxyethylene)-2-propoxy-tetradecane (Y-surfactant) and 1,3-bis-(heptyloxy)-2-propoxyoctaoxyethylene mono-methyl ether (V-surfactant) and water were studied by polarizing microscopy. The two branched surfactants, which have different molecular geometries but nearly the same hydrophilic-lipophilic volume ratio, exhibit extremely different phase behavior in binary surfactant/water systems. For the ternary mixtures of Y- and V-surfactant and water we found-according to established packing models-a continuous stabilization of the cubic and hexagonal phases and a destabilization of the lamellar phase with increasing amount of Y-surfactant. On the other hand, we observed a thermal stabilization of the lamellar phase. The maximal transition temperatures of the lamellar phase pass a maximum with increasing amount of Y-surfactant.