手性铜催化剂的制备及在环丙烷羧酯酯不对称合成中的应用

３类手性配体ｄ－１０－樟脑磺酸及其衍生物，α－（－）－羟蒎酮及其衍生物，又恶唑啉６衍生物分别与铜（Ⅱ）形成手性铜配合物，催化重氮乙酸酯与１，１－二苯乙烯或异丁烯的环丙烷化加成反应，得到光学活性环丙羧酸酯，不对称诱导最高可达９５％ｅ．ｅ．。     

溶剂蒸气对聚对苯二甲酸乙二酯作用的差示扫描量热研究

用差示扫描量热(DSC)研究了几种有机溶剂蒸气对聚对苯二甲酸乙二酯(PET)的作用,表明可分为反应性的和非反应性的两种。同时,对于非反应性的作用,依冷结晶峰面积的变化,又可分为三种类型:冷结晶峰面积不变,经诱导期后下降,无诱导期而迅速下降。双冷结晶峰现象在一些非反应性溶剂处理过的PET试样的DSC曲线也观察到。     

The effect of annealing on the subsequent cold crystallization of amorphous poly(ethylene terephthalate)

Amorphous poly(ethylene terephthalate) was annealed at temperatures around the glass transition temperature and then heated up in differential scanning calorimeter at 20 °C min⁻¹. It was found that the annealing favored the subsequent cold crystallization and this effect became stronger with increasing annealing temperature. The experimental results were explained by considering the structural change during the annealing.     

聚酯-聚酯多嵌段共聚物的合成及其动态力学性能

聚酯-聚醚多嵌段共聚物的动态力学性能谱上有两个T_8,不宜做阻尼材料。本文报道聚对苯二甲酸乙二醇酯(PET)-端羟基聚己二酸乙二醇酯(PEA)共聚物(简称嵌段共聚酯),比聚醚-聚酯多嵌段共聚物有更好的相容性。我们研究了PEA的分子量,间苯二甲酸的用量对嵌段共聚酯的结晶度,以及结晶度对嵌段共聚酯的动态力学性能的影响。     

生物相容性BAB型两亲嵌段共聚物的合成及其自组装

Lys(z)-NCA was synthesized in the presence of triphosgene, amphiphilic triblock copolymers poly(N^c-CBZ-Lysine)-PEG-poly(N^c-CBZ-Lysine) were synthesized in DMF using amino-end ended PEG as initiator with the mechanism of anion ring opening polymerization. The structures of block copolymers were characterized by IR, ^1H-NMR,GPC and DSC. The results showed triblock copolymers with expected structure and low polydispersity in molecular weight could be synthesized by this method. At the same time, the self-assembling behaviors of block copolymer were investigated by TEM. A novel helical aggregates were found to be formed in DMF. Because of biocompatibility of two components of block copolymers, these block copolymers have potential applications in the field of biomaterials.     

Pd-SiW12/SiO2催化剂上乙烯直接氧化制乙酸的反应机理

 利用积分反应器和微分反应器对Pd－SiW12／SiO2催化剂上乙烯直接氧化生成乙酸的反应机理进行了探讨．乙烯在积分反应中氧化的主要产物为乙酸（选择性为77．6％），很少生成乙醛（选择性仅为8．1％）；而在微分反应中氧化的主要产物是乙醛（选择性为98．4％）．在微分反应中分别以乙醛和乙醇为主反应物时，乙醛氧化完全生成乙酸，选择性为100％，而乙醇氧化生成乙酸的选择性低于0．15％．可以认为，在Pd－SiW12／SiO2催化剂上，水蒸气存在下乙烯主要经由中间物乙醛而生成乙酸．通过对含有不同组分和不同还原条件处理的催化剂活性的比较，认为目的反应主要发生在Pd与SiW12相互接触的部位，催化剂中的Pd0是活性Pd物种的主要形态．     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.     

1,2-丁二醇共聚对聚对苯二甲酸乙二醇酯结晶行为及力学性能的影响

为了探索生物基乙二醇中的1,2-丁二醇(1,2-BDO)作为共聚单体对生物基聚对苯二甲酸乙二醇酯(PET)的结晶行为和力学性能的影响。 本文合成了生物基PET均聚物和不同1,2-BDO共聚单元摩尔分数的系列生物基PET共聚物(共聚单体摩尔分数分别为2.0%、2.7%和5.6%),并采用傅里叶变换红外光谱仪(FTIR)、差示扫描量热仪(DSC)和力学测试等技术手段研究了其结晶行为和力学性能。 结果表明,随着1,2-BDO共聚单元摩尔分数的增加,PET共聚物的熔融温度、结晶速率及结晶度均明显降低,表明1,2-BDO共聚单体的引入破坏了PET分子链的规整性,阻碍了PET链段的结晶。 PET材料的拉伸强度随着1,2-BDO共聚单元摩尔分数的增加而降低,而弯曲强度和弯曲模量略有升高。     

Investigation of the detection limit for the determination,by pyrolysis-capillary GC,of the thickness of ultra thin PMMA layers coated on to PET film

The determination of nanometer thick layers of poly(methyl methacrylate) coated on to the surface of poly(ethylene terephthalate) film has been investigated by high resolution pyrolysis gas chromatography without sample pretreatment or modification of the instrumentation used. A good linear relationship was observed between the quantity of the characteristic pyrolysate and the thickness of the poly(methyl methacrylate) layer; the detection limit was sufficient to enable the quantitation of poly(methyl methacrylate)-to-poly(ethylene terephthalate) film thickness ratios of 1:20000 in composite materials.     

热致液晶共聚酯酰胺／PET共混物的流变性能和原位增强特性

采用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了ＰＥＡ／ＰＥＴ共混物的流变性能，据此探讨共混物熔体的可纺性，讨论了共混物配比与复合纤维力学性能的关系，并且偏光显微镜，扫描电镜研究纤维的结构。结果表明，共混物的表观粘度低于ＰＥＴ的粘度，当ＰＥＡ为１０％，共混物的表观粘度达到最小值；且ＰＥＡ含量低于１０％时，共混物的可纺性即，表现出良好的原位增强效果。