Cyanide-Free One-Pot Synthesis of Methacrylic Esters from Acetone

Methacrylic esters, represented by methyl methacrylate (MMA), are widely used as commodity chemicals. Here, the one-pot synthesis of methacrylic esters from acetone, a haloform and alcohols in the presence of an organic base is described. Using DBU as the organic base for the reaction of acetone, chloroform and methanol in acetonitrile afforded MMA in 66 % yield. When the solvent was replaced by benzonitrile, the product MMA was successfully purified by distillation. Applicability of this process to various alcohols was also investigated to show ethyl, phenyl, CF₃CH₂, and n-C₆F₁₃CH₂CH₂ esters were obtained in moderate yields. The use of bromoform instead of chloroform resulted in the improvement of the yield, for example, methyl and n-C₆F₁₃CH₂CH₂ esters up to 81 and 70 %, respectively. The reaction with deuterated starting materials acetone-d₆ and MeOH-d₄, with DBU in acetonitrile afforded deuterated MMA (MMA-d₈) in 70 % yield.     

Transition-metal,organic solvent and base free α-hydroxylation of β-keto esters and β-keto amides with peroxides in water

Without employing any transition metal, organic solvent and base, a facile, economical and environmentally friendly strategy has been developed for the α-hydroxylation of β-keto esters and β-keto amides with peroxides via radical cross-coupling reaction in water under open-air conditions. This protocol allows a convenient access to various α-hydroxy-β-keto esters and α-hydroxy-β-keto amides with up to 92% yield (34 examples). Moreover, the reaction was successfully scaled up to gram quantity and mechanistic studies showed the radical pathway was involved in this hydroxylation.     

Temperature program optimization by computer simulation for the capillary GC analysis of fatty acid methyl esters on biscyanopropyl siloxane phases

The selectivity of capillary columns coated with biscyanopropyl siloxane stationary phases for the separation of fatty acid methyl esters has been optimized by means of computer-assisted column temperature optimization software. Temperature programming rates yielding the highest resolution in the shortest analysis time were selected for split, splitless, and on-column injection operated in the constant pressure and pressure programmed modes.     

Analysis of free and esterified sterols in vegetable oil methyl esters by capillary GC

The introduction of quality standards for vegetable oil methyl esters is gaining in importance due to their increased use as diesel fuel substitutes and as technical products. Free and esterified sterols, the main constituents of the unsaponifiable matter in vegetable oils, are recovered in vegetable oil methyl esters and may influence the technical properties of vegetable oil methyl ester products. A rapid gas chromatographic method for the qualitative and quantitative determination of free and esterified sterols in vegetable oil methyl esters has therefore been developed. The concentration of the free sterols as well as their qualitative and quantitative composition and the concentration of the sterol esters have been determined in rape seed oil methyl ester samples by GC–FID. Prior to analysis, the free sterols were silylated with N,O-bis(trimethylsilyl)trifluoroacetamide with 1% of trimethylchlorosilane; betulinol was used as an internal standard. Calibration was performed by analysis of standard solutions containing β-sitosterol, cholesteryl stearate, and betulinol. The reproducibility of the quantitative results has been evaluated by repeated injections of the same test solution and by repeated complete analysis of the same sample.     

Esters of 4,5-dihydro-1H-imidazole-1-oxyl-3-oxide-carboximidic acid

Esters of 4,5-dihydro-1H-imidazole-1-oxyl-3-oxide-carboximidic acid were synthesized. Their structures and magnetic properties were investigated.     

液晶研究（Ⅰ）──4＇－酰基－4－羟基－1，1＇－联苯酯类液晶的合成与性质

以４＇－羟基联苯为原料合成了８种新型４＇－酰基－４－羟基联苯酯类化合物．除化合物５＿ｈ外，均为新的近晶相液晶化合物．它们具有较宽的相变温度范围和较高的热稳定性．用偏光显微镜和差热分析仪研究了它们的相行为，讨论了分子结构对液晶相行为的影响．     

环境样品中痕量邻苯二甲酸酯的分离与测定

本文研究了以小粒径（１０－４０μ）硅胶柱色谱分离富集、反相高效相色谱分析测定大气颗粒物、土主植物样品中痕量邻苯二甲酸酯的方法，方法操作简单，回收率高，空白值低，利用该方法分析了部分环境样品中邻苯二甲酯酯含量。     

Über Chalkogenolate. 206 [1]. N-Thioacetyldithiocarbamate und Ester der N-Thioacetyldithiocarbamidsäure

On Chalcogenolates. 206. N-Thioacetyl Dithiocarbamates and Esters of N-Thioacetyl Dithiocarbamic Acid Thioacetamide reacts with carbon disulfide in the presence of KH to form via the tetrabutyl ammonium salt dark yellow N-thioacetyl dithiocarbamates M[S₂C? NH? CS? CH₃], where M = K, Rb, Cs. The salts as well as the methyl and ethyl ester have been characterized by means of electron absorption, infrared, nuclear magnetic resonance (¹H and ¹³C), and mass spectra. Attempts to synthesize N-thioacetyl dithiocarbamic acid were not successful.     

Preparation and evaluation of thermally stable nano-structured self-doped polythiophene coating for analysis of phthalate ester trace levels

Nano‐structured self‐doped polythiophene (SPT) electrodeposited in the presence of fluorinated organic acid was applied as a thermally stable conductive polymer‐based solid‐phase microextraction (SPME) fiber candidate. Quantitative determination of trace levels of phthalate esters including dimethyl phthalate (DMP), diethyl phthalate (DEP), dibutyl phthalate (DBP), and diethylhexyl phthalate (DEHP) was carried out using this novel fiber, coupling with gas chromatography‐flame ionization detector (GC‐FID). The SPT coating was proved to be stable at high temperatures (～350°C) with a high extraction capacity and long lifetime (more than 60 times). Improved temperature resistance was obtained by the presence of sulfonated groups in the backbone of polymer. Thermal stability of novel SPT was superior to common polythiophene (synthesized in LiClO₄). The extraction procedure was optimized by means of the Taguchi orthogonal array experimental design with an OA₁₆ (4⁵) matrix including extraction temperature, extraction time, salt concentration, stirring rate, and headspace volume. The good linearity was obtained for most compounds with correlation coefficients (R²) of between 0.993 and 0.995. The detection limits were lower than 0.12 ng/mL for dimethyl phthalate, DEP, dibutyl phthalate, and diethylhexyl phthalate. The method was successfully applied to the analysis of water samples with the recoveries from 90±1 to 107±1%.