The assessment of compliance with legal limits. Part 2. How to consider both type I and type II errors when working in the concentration domain

Considering the uncertainty of measurement when assessing compliance with reference values given in compositional specifications and statutory limits is still a controversial matter. In theory, assessing compliance requires considering both type I (false positive) and type II (false negative) errors. The more the concentration of the analyte in the sample under investigation is close to the allowed concentration limit, the more critical it is to consider both types of errors. This paper describes how this could be done. The matter is discussed in the light of the most recent literature information.     

能动抛光磨盘的变形实验研究

 能动抛光磨盘实时产生不同的表面变形，在对大口径非球面光学元件进行精磨和抛光时实现与工件表面良好的大尺寸吻合，可以消除传统光学加工采用小尺寸磨头时带来的高频残余误差并提高加工效率。以加工直径1.3m左右，F/2的抛物面光学元件为例，对能动磨盘在不同离轴度时能够产生的变形进行了计算和实验。结果表明，能动磨盘能够以较高精度产生旋转对称或非对称的抛物面形状。对能动磨盘产生变形后的残余误差进行了分析。     

考虑防御系统延迟使其预测误差最大的突防弹道设计

对中段多脉冲机动突防弹道的设计问题进行了研究。采用的原理与方法有别于成熟的航天器多脉冲变轨,而是基于路径规划的思想对弹道设计问题简化。考虑敌方防御系统延迟,改进多脉冲点火模型,并基于变射面的思想对关机点参数进行了设计及优化。然后,从使敌方预测误差最大的角度提出评价函数,并利用遗传算法进行优化。最后,给出了一种同时满足导弹机动突防与打击精度要求的多脉冲弹道设计方法。从模型的可行性,方法的有效性、灵活性、迭代效率及精度等方面进行了仿真验证分析。在PC机仿真中,20 s内就设计出一条保证打击精度的中段突防弹道。结果表明,建立的模型是可行的,提出的突防弹道设计方法是快速有效的。     

A high‐precision instrument for mapping of rotational errors in rotary stages

A rotational stage is a key component of every X‐ray instrument capable of providing tomographic or diffraction measurements. To perform accurate three‐dimensional reconstructions, runout errors due to imperfect rotation (e.g. circle of confusion) must be quantified and corrected. A dedicated instrument capable of full characterization and circle of confusion mapping in rotary stages down to the sub‐10 nm level has been developed. A high‐stability design, with an array of five capacitive sensors, allows simultaneous measurements of wobble, radial and axial displacements. The developed instrument has been used for characterization of two mechanical stages which are part of an X‐ray microscope.     

Quintic hyperbolic nonpolynomial spline and finite difference method for nonlinear second order differential equations and its application

An efficient numerical method based on quintic nonpolynomial spline basis and high order finite difference approximations has been presented. The scheme deals with the space containing hyperbolic and polynomial functions as spline basis. With the help of spline functions we derive consistency conditions and high order discretizations of the differential equation with the significant first order derivative. The error analysis of the new method is discussed briefly. The new method is analyzed for its efficiency using the physical problems. The order and accuracy of the proposed method have been analyzed in terms of maximum errors and root mean square errors.     

Mehr-Detektor-Anordnung für die Koinzidenzmessung von Positronenstrahlern

Procedures are given for the title compounds, which allow their preparation in high chemical purity and without any depletion of the ¹⁵N-content. A nitrogen isotope exchange between NOBF₄ and ¹⁵N₂O₃ was found, but it is too slow for preparative purposes.     

Sensitivity analysis for a type of statically stable sailcrafts

Two types of sensitivities are proposed for statically stable sailcrafts.One type is the sensitivities of solar-radiation-pressure force with respect to position of the center of mass,and the other type is the sensitivities of solar-radiation-pressure force with respect to attitude.The two types of sensitivities represent how the solar-radiationpressure force changes with the position of mass center and the attitude.Sailcrafts with larger sensitivities undergo larger error of the solar-radiation-pressure force,leading to larger orbit error,as demonstrated by simulation.Then as a case study,detailed formulas are derived to calculate the sensitivities for sailcrafts with four triangular sails.According to these formulas,in order to reduce both types of sensitivities,the angle between opposed sails should not be too large,and the center of mass should be as close to the axis of symmetry of the four sails as possible and as far away from the center of pressure of the sailcraft as possible.     

三线摆实验中摆角偏大产生的误差及修正方法

研究了三线摆实验中摆角偏大(5°θ20°)时对测量转动惯量产生的误差和修正办法。实验发现随着摆角的增大,测得的圆盘转动惯量也会相应偏大,从而导致测量误差增大。文章通过进一步的理论分析解释了这一现象,并对测量结果进行了系统误差修正。     

镜面偏心测量光学系统设计及其杂光分析

为了解决现有镜面偏心测量设备存在的问题,本文研究了一种采用切换镜头和调焦相结合的方法来设计的镜面偏心测量光学系统,使用这个光学系统,既能使被测镜面的曲率半径扩展到-∞~+∞范围,又能保证测量精度。通过Lighttools软件对这个光学系统进行光线追迹,分析其杂光分布,结果表明:准直镜头内部多次反射产生的杂光强度很低,可以忽略。而当被测镜头中存在相邻球心像距的镜面时,产生的杂光强度比较大,在后续的图像处理过程中,必须增强目标图像的对比度。利用研制的镜面偏心测量设备进行测量实验,结果进一步验证了杂光分析的正确性。