热丝加热电流对CH薄膜沉积速率和表面形貌的影响

 热丝辅助裂解法是结合气相沉积制备聚对二甲苯薄膜和热丝化学气相沉积而形成的一种制-CH薄膜的新方法。热丝辅助裂解法的最大特点就是在保持低衬底温度情况下可以获得高沉积速率，而热丝加热电流对薄膜沉积速率和薄膜表面形貌具有重要影响。研究表明，热丝加热电流越大，薄膜沉积速率越高，在加热电流9A时，薄膜沉积速率可达0.002mm/min，同时薄膜表面粗糙度随之增加，薄膜表面也开始出现其它元素污染，因此，一般热丝加热电流选择为7A附近。     

A technique to construct symmetric variable-stepsize linear multistep methods for second-order systems

Some previous works show that symmetric fixed- and variable-stepsize linear multistep methods for second-order systems which do not have any parasitic root in their first characteristic polynomial give rise to a slow error growth with time when integrating reversible systems. In this paper, we give a technique to construct variable-stepsize symmetric methods from their fixed-stepsize counterparts, in such a way that the former have the same order as the latter. The order and symmetry of the integrators obtained is proved independently of the order of the underlying fixed-stepsize integrators. As this technique looks for efficiency, we concentrate on explicit linear multistep methods, which just make one function evaluation per step, and we offer some numerical comparisons with other one-step adaptive methods which also show a good long-term behaviour.

     

用迈克耳逊干涉仪测量气体折射率的误差的研究

研究在用迈克尔逊干涉仪测量气体折射率时存在的系统和方法误差，提出了误差修正方法。     

增长曲线模型中回归系数的广义根方估计

本文对增长曲线模型中的回归系数B提出了一种新的估计形式－广义根方估计的B（K），其中K＝diag(k1,k2,…，kp）并证明了通过广义根方偏参数ki(i=1,2,…，p）的适当选取可使得该估计在均方误差矩阵的意义下优于已有的LS估计和根方估计，及广义根方估计是可容许估计，本文还给出了选取广义根方偏参数的两种方法，算法及一个应用实例。     

加速牛顿迭代收敛的新方法

提出了加速牛顿迭代收敛的新思想，构造出一类加权牛顿迭代格式，通过选取最优加权因子，使得该格式具有高阶收敛性和较小的渐近误差常数。     

非线性不适定问题一种双循环的牛顿型迭代格式

本文研究非线性算子方程F(x)=y的解,结合最速下降法,Newton-Landweber迭代格式及正则化思想,在F满足适当的条件下,构造出新的双循环迭代格式。本文对格式的收敛性进行了严格论证,并估计出迭代格式的收敛精度。     

Al/Al2O3P金属基复合材料的静动态压缩性能及损伤分析

用气压浸渗工艺制备了体积分数40％～50％Al2O3颗粒增强纯铝基复合材料，使用了4种不同尺寸的Al2O3颗粒，其平均粒径分别为5μm、10μm、30μm和60μm．测定了这些复合材料的静、动态压缩性能，并通过材料压缩前后密度变化的测量定量表征了材料的累计损伤，结果表明，与基体材料相似，这些复合材料表现出明显的应变率敏感性；当增强颗粒平均粒径小于60μm时，材料的累计损伤基本与应变率无关，而主要取决于材料的应变．材料中颗粒的破裂主要是由颗粒间的相互作用引起的．较小尺寸颗粒增强的复合材料具有较高的流动应力和较小的累计损伤，并随着颗粒体积分数的增加，材料的流动应力和损伤率都相应增加．     

UPWIND FINITE VOLUME SCHEMES FOR SEMICONDUCTOR DEVICE

The mathematical model of semiconductor devices is described by the initial boundary value problem of a system of three nonlinear partial differential equations. One equation in elliptic form is for the electrostatic potential; two equations of convection-dominated diffusion type are for the electron and hole concentrations. Finite volume element procedure are put forward for the electrostatic potential, while upwind     

离轴非球面轮廓测量导轨直线度误差补偿模型

由于研磨阶段非球面的面形误差将由几十微米收敛到几个微米,因此采用高重复精度的离散测量技术是决定误差收敛效率、影响加工进程的关键。在新一代数控光学加工中心(FSGJ Ⅱ)上,设计了双测头对非球面进行面形定量检测的轮廓测量机构。通过对测头运动导轨在x、z方向的直线精度的分析,建立了导轨直线度误差补偿模型,以较低的成本实现了较高的测量精度。     

Synthesis and antibody conjugation of magnetic nanoparticles with improved specific power absorption rates for alternating magnetic field cancer therapy

Bionized nanoferrite (BNF) particles with high specific power absorption rates were synthesized in the size range of 20–100 nm by high-pressure homogenization for targeted cancer therapy with alternating magnetic fields. Several strategies were used to conjugate antibodies to the BNF particles. These strategies were compared using an immunoassay to find optimal conditions to reach a high immunoreactivity of the final antibody–particle conjugate.