COUPLING EFFECTS OF VOID SHAPE AND VOID SIZE ON THE GROWTH OF AN ELLIPTIC VOID IN A FIBER-REINFORCED HYPER-ELASTIC THIN PLATE

The growth of a prolate or oblate elliptic micro-void in a fiber reinforced anisotropic incompressible hyper-elastic rectangular thin plate subjected to uniaxial extensions is studied within the framework of finite elasticity. Coupling effects of void shape and void size on the growth of the void are paid special attention to. The deformation function of the plate with an isolated elliptic void is given, which is expressed by two parameters to solve the differential equation. The solution is approximately obtained from the minimum potential energy principle. Deformation curves for the void with a wide range of void aspect ratios and the stress distributions on the surface of the void have been obtained by numerical computation. The growth behavior of the void and the characteristics of stress distributions on the surface of the void are captured. The combined effects of void size and void shape on the growth of the void in the thin plate are discussed. The maximum stresses for the void with different sizes and different void aspect ratios are compared.     

Preparation and properties of luffa fiber- and kenaf fiber-filled poly(butylene succinate-co-lactate)/starch blend-based biocomposites

Biodegradable poly(butylene succinate-co-lactate) (PBSL)/starch blends that contain various amounts of starch were prepared. In addition, luffa fiber (LF) and kenaf fiber (KF) were incorporated, individually, into PBSL/starch (70/30) blend to achieve biocomposites. The LF and KF were treated with NaOH_(aq) prior to their addition to the blend. The Young's modulus and flexural modulus of PBSL increased with the addition of starch and increased further after the formation of the biocomposites. The highest Young's modulus increment, which was found in the KF-added system, was up to a 2.2-fold increase compared with neat PBSL. The tensile/flexural/impact strength of PBSL declined after the formation of the blends. With the further addition of LF/KF, the said properties leveled off. The blends exhibited higher complex viscosity and dynamic storage modulus in the melt state than the neat PBSL, and the values further increased in the biocomposites. The crystallization temperature of PBSL slightly decreased in the blends. By contrast, the biocomposites showed an increment in PBSL crystallization temperature, from 73.0 °C (PBSL) to 75.3 °C (KF-added composite), thereby confirming the surface nucleation effect of LF/KF. The blends showed a higher degree of water absorption than PBSL. The formation of biocomposites led to an even higher degree of water absorption. The current approach of including LF/KF in the PBSL/starch blend to enhance the rigidity and biodegradability was advantageous in expanding the applications of PBSL.     

线缆系统电磁脉冲效应测量系统研制和试验

分析了实验室瞬态X射线产生的系统电磁脉冲(SGEMP)效应测试所面临的技术问题,提出了解决方法、措施以及实验室模拟瞬态X射线的SGEMP模拟试验方法。通过电子屏蔽、电磁屏蔽、光电隔离、信号对称提取等特殊技术处理,解决了SGEMP效应模拟试验方法和测量系统抗X射线、抗电磁辐射等技术问题,并在大型瞬态X射线模拟源上,测出了瞬态X射线辐照时金属腔内线缆的SGEMP效应波形及幅值。     

A Photo-Responsive Organogel Based on Pyrene-Substituted Acylhydrazone Derivative

A new simple pyrene-substituted acylhydrazone derivative, 4-(3,4-dioctyloxy) phenyl-1-pyrene acylhydrazone (PAH-8), was designed and synthesized. The PAH-8 can form thermo-reversible organogel in DMSO, and shows gelation-induced enhanced fluorescence emission. Xerogel exhibits ribbon-like fibrous aggregates with widths of 0.5-1 μm. The PAH-8 organogel indicates photo-responsive behaviors due to the trans-cis isomerizations of -C=N- bond upon exposure to visible or UV light. Upon visible light irradiation, the partial trans-cis isomerization of the -C=N- bond causes the fiber morphology to disappear, resulting in gel-sol transition, whereas the PAH-8 organogel exhibits few photoisomerizations from trans to cis transition without breakage of the gel state upon UV light irradiation.     

Surface modification for nano‐lignocellulose fiber through vapor‐phase‐assisted surface polymerization

This study addresses the inherent issues surrounding surface modification methods of nanofibers and proposes an environmentally friendly and less toxic strategy for the surface modification of hydrophilic nanofiber. From the continuation of our previous work, which discussed the easy production of nanofiber (average size: 127 nm) from oil palm mesocarp fiber (OPMF), in this work, the surface of nanofibers (M‐IL‐OPMF) were modified through vapor‐phase‐assisted surface polymerization (VASP) to improve the affinity of interface between the polymer grafted M‐IL‐OPMF and non‐polar matrix. VASP of ε‐caprolactone was successfully proceeded from the [M‐IL‐OPMF] at 70 °C for 24 h and 72 h, and compositions were estimated to be 35.7% fiber/64.3% polymer and 27.8% fiber/72.2% polymer. To confirm the grafting of PCL, size‐exclusion chromatography (SEC) and Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetry (TG), and dispersibility test in hydrophobic solvent were carried out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2575–2580     

级联光栅结合Sagnac环的可调谐光纤激光器

提出并验证了一种单-双波长可调谐掺铒光纤激光器。利用级联光纤布拉格光栅(Cascaded Fiber Bragg gratings,Cascaded FBGs)结合Sagnac环结构所产生的复合滤波效应,实现较高精细度滤波,并通过调节环内偏振控制器(Polarization Controller,PC),引入双折射效应,得到波长可调谐的光纤激光器。基于耦合模理论并使用传输矩阵法对该结构的传输特性进行了分析,在此基础上搭建实验系统,验证了理论分析的正确性。实验结果表明:通过调节PC,激光器输出激光的波长范围约为1 555.644～1 556.112 nm,双波长间隔的可调范围约为0.108～0.452 nm,单-双波长的边模抑制比(SMSR)均高于40 dB;在稳定性测试中,输出单-双波长激光的波长最大漂移量小于0.008 nm。该方法具有结构简单、调谐方便、易于实现且精细度较高的优点,可应用于密集波分复用及全光通信系统等领域。     

Enhanced mechanical properties of unidirectional basalt fiber/epoxy composites using silane-modified Na+-montmorillonite nanoclay

This study explores the effects of 3-glycidoxypropyltrimethoxysilane (3-GPTS) modified Na-montmorillonite (Na-Mt) nanoclay addition on mechanical response of unidirectional basalt fiber (UD-BF)/epoxy composite laminates under tensile, flexural and compressive loadings. Fourier transform infrared (FT-IR), X-ray diffraction (XRD) and simultaneous thermal analysis (STA) data confirmed the reaction mechanism between the silane compound and Mt. It was demonstrated that addition of 5 wt % 3-GPTS/Mt resulted in 28%, 11% and 35% increase in flexural, tensile and compressive strengths. Scanning electron microscopy (SEM) clarified the improvement in the adhesion between the basalt fibers and matrix in the case of Mt-enhanced epoxy specimens. Also, a theoretical route based on a Euler-Bernoulli beam-based approach was employed to estimate the compressive properties of the composites. The results demonstrated good agreement between theoretical and experimental approaches. Totally, the results of the study show that matrix modification is an effective strategy to improve the mechanical behavior of fibrous composites.     

UHMWPE纤维的超临界CO_2辅助渗透预处理研究

利用Minitab软件设计实验,以超高分子量聚乙烯纤维(UHMWPE)为原料,研究了在不同的超临界CO_2流体状态下,处理压力、温度和时间等因素对三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)渗入率的影响,确定了最佳因素设置范围;通过单因子实验优化了超临界CO_2处理工艺,并对经过电子束辐照的UHMWPE纤维凝胶含量和蠕变率进行了测试。研究结果表明:处理温度对TMPTMA的渗入率影响最大,其次为压力,时间的影响最小,确定了最优工艺条件为处理压力25MPa,温度80℃,时间30min;TMPTMA渗入率越高,电子束辐照后UHMWPE纤维的增感辐照交联效应和抗蠕变效果越好。