Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy

ABSTRACT

The effect of transition elements, specifically Mn, Cr, V, and Mo, on dispersoid formation and mechanical properties in 6082 aluminum alloy was studied. The elevated-temperature mechanical properties were evaluated based on the compressive yield strength and creep resistance. The results indicated that the addition of Mn to the 6082 alloy resulted in the formation of a large number of the thermally stable α-Al(MnFe)Si dispersoids, thereby significantly improving the elevated-temperature mechanical properties of the alloy. Subsequent additions of Cr, V, and Mo increased the amount of Mn-bearing intermetallic phases, which decreased the supersaturation levels of Mn and Si in the α-Al, and consequently decreased the volume fraction of the dispersoids. The alloys containing Cr, V, and Mo exhibited similar yield strengths at 300°C and higher yield strengths at room temperature compared to the alloy containing only Mn. The size effect of the smaller dispersoids containing Cr, V, and Mo together with the solid-solution hardening of these elements could balance out the strength decrease resulting from the decreased volume fraction of the dispersoids. The additions of Cr, V, and Mo significantly increased the creep resistance of the Mn-containing 6082 alloy. Vanadium induced the highest creep resistance followed by Cr and Mo. Solute atoms of these elements with low diffusivity in the aluminum matrix contributed significantly to increasing the creep resistance at 300°C.     

Mechanical characterization of a new Kevlar/Flax/epoxy hybrid composite in a sandwich structure

Natural fibers are inexpensive, biodegradable, and have similar specific properties to some synthetic fibers. Hardly any previous investigations exist of a composite made of multiple layers of pure Kevlar fiber fabric and pure Flax fiber fabric in a “sandwich structure”, but it only measured impact properties. The composite was made of 12 Flax/epoxy layers at the core in 3 possible configurations (i.e. [0]_12F, [0/90]_6F, or [±45]_6F) that were sandwiched by 2 Kevlar/epoxy layers (i.e. plain weave) on each side. This study showed maximum change in the mechanical properties with respect to Flax/Epoxy for tension (+137.85% in E_T, and +171.22% in σ_UT), compression (+171.22% in E_c, and −10.6% in σ_UC), 3-point bending (−11.54% in E_B, and +2.19 in σ_UB), torsion (−5.31% in G, and 395.82% in τ), and water absorption (60.04%). This novel hybrid composite may be useful for research and industry applications.     

Evidence for Non-Innocence of a β-Diketonate Ligand

β-Diketonates, such as acetylacetonate, are amongst the most common bidentate ligands towards elements across the entire periodic table and are considered wholly redox-inactive in their complexes. Herein we show that complexation of 1,1,1,5,5,5-hexafluoroacetylacetonate (hfac⁻) to Cr^II spontaneously affords Cr^III and a reduced β-diketonate radical ligand scaffold, as evidenced by crystallographic analysis, magnetic measurements, optical spectroscopy, reactivity studies, and DFT calculations. The possibility of harnessing β-diketonates as electron reservoirs opens up possibilities for new metal–ligand concerted reactivity in the ubiquitous β-diketonate coordination chemistry.     

On generalized Nash equilibrium problems with linear coupling constraints and mixed-integer variables

ABSTRACT

We define and discuss different enumerative methods to compute solutions of generalized Nash equilibrium problems with linear coupling constraints and mixed-integer variables. We propose both branch-and-bound methods based on merit functions for the mixed-integer game, and branch-and-prune methods that exploit the concept of dominance to make effective cuts. We show that under mild assumptions the equilibrium set of the game is finite and we define an enumerative method to compute the whole of it. We show that our branch-and-prune method can be suitably modified in order to make a general equilibrium selection over the solution set of the mixed-integer game. We define an application in economics that can be modelled as a Nash game with linear coupling constraints and mixed-integer variables, and we adapt the branch-and-prune method to efficiently solve it.     

Synthesis,characterization and cytotoxicity of new 2‐isonicotinoyl‐N‐phenylhydrazine‐1‐carbothioamide and its metal complexes

The reaction of the newly synthesized ligand, 2‐isonicotinoyl‐N‐phenylhydrazine‐1‐carbothioamide (H₃L), with acetate salt of Co (II), Cu (II),Ni (II) and Zn (II) led to isolation of four solid complexes. The ligand and complexes structure elucidation were based on elemental analyses, spectral analyses (IR, UV–Visible, ¹H and¹³C‐NMR, MS and ESR), TGA, molar conductivity and magnetic moments measurements. The results indicated that the ligand exists in the thioketo form, while on coordination to the metal ions; it behaves as mono‐negative bidentate chelate and exists in enol form. The optical band gap measurements of the ligand and its metal complexes are in the range 3.83–4.48 eV indicating their semi‐conducting character. The cytotoxicity examination of H₃L and its Zn (II) complex showed that the ligand have very strong cytotoxicity against both HCT‐116 and HEPG‐2 cell lines while, Zn (II) complex has moderate activity.     

Influence of imide functionalized organo‐modified Mg‐Al layered double hydroxide on the thermal and mechanical properties of new aliphatic‐aromatic poly (amide‐imide)

A new dicarboxylic acid modified Mg‐Al LDH (DLDH) containing imide groups was prepared and its effects on the thermal and mechanical properties of the new synthesized aliphatic‐aromatic poly (amide‐imide) (PAI) were investigated via preparation of PAI/nanocomposite films by solution casting method. The results of X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) showed a uniform dispersion for LDH layers into the PAI matrix. For comparison, the effects of polyacrylic acid‐co‐poly‐2‐acrylamido‐ 2‐methylpropanesulfonic acid (PAMPS‐co‐PAA) modified Mg‐Al LDH (ALDH) on the PAI properties were also studied. The thermogravimetric analysis (TGA) results exhibited that the temperature at 5 mass% loss (T₅) increased from 277 °C to 310 °C for nanocomposite containing 2 mass% of DLDH, while T₅ for nanocomposite containing 2 mass% of ALDH increased to 320 °C, along with the more enhancement of char residue compared to the neat PAI. According to the tensile test results, with 5 mass% DLDH loading in the PAI matrix, the tensile strength increased from 51.6 to 70.8 MPa along with an increase in Young's modulus. Also the Young's modulus of PAI nanocomposite containing 5 mass% ALDH reduced from 1.95 to 0.81 GPa.     

Alternating Magnetic Field Controlled Targeted Drug Delivery Based on Graphene Oxide-Grafted Nanosupramolecules

Graphene oxide (GO)-grafted nanosupramolecules have recently emerged as neoteric nano drug carriers in the therapy of refractory diseases. Herein, a multicomponent nanosupramolecular drug carrier based on a targeted peptide and magnetic GO is reported, the drug-release behavior of which can be regulated by an alternating magnetic field (AMF). This multicomponent nanosupramolecular carrier is composed of β-cyclodextrin (β-CD)/nickel nanoparticle-modified graphene oxide (GONiCD) and mitochondrial ion-targeting peptide (MitP)-grafted hyaluronic acid (HAMitP). Owing to the host–guest interaction between β-cyclodextrin and the cyclohexyl groups on MitP, GONiCD and HAMitP could form supramolecular assemblies during the doxorubicin (Dox) loading process, which not only remarkably enhances the drug-loading capacity, but also improves the drug-release efficiency under AMF stimulus. During co-incubation with tumor cells, the Dox-loaded assemblies could strongly target the tumor mitochondria and damage both the mitochondria and the nuclei, owing to Dox release from the assemblies induced by AMF. This study sheds light on the exploration of peptide caps for controlled drug loading/release of supramolecular nanocarriers for efficient drug delivery and anticancer therapy.     

Observation of unusual Griffith’s phase behavior in quadruple perovskite oxide CaCu3Mn4O12 (CCMO) synthesized through chemical route

The CaCu₃Mn₄O₁₂ (CCMO) ceramic was successfully synthesized through the chemical route. The phase formation was confirmed by the X-ray diffraction pattern. Thermogravimetric (TGA), FT-IR, SEM, TEM, EDX, and XPS analysis were performed for investigation of the thermal behavior, phase identification, microstructural analysis, elemental analysis and oxidation state of the CCMO ceramic respectively. FT-IR spectra confirmed the existence of MnO₆ octahedral in body-centered cubic (BCC) complex perovskite oxide that resembles the CaCu₃Ti₄O₁₂ structure. The average particle size was observed by TEM in the range between 100 and 200 nm. AFM shows the average roughness of the surface was found to be in the range of 30 ± 5 nm. XPS and EDX studies confirmed the purity and oxidation state of the CCMO ceramic. The synthesized material shows very interesting unique Griffith’s phase (T_G) results that arise disorder in magnetic susceptibility in which ferromagnetic transition was to be observed in the paramagnetic region.