一种可实现薄膜厚度在线测量的方法

介绍了一种测量固体薄膜厚度的光学方法。该方法具有测量速度快、可实现在线测量等特点。为解决薄膜生产过程中厚度在线检测问题,构造了一套软硬件实验系统,利用该系统进行实验的结果表明:在10~100μm厚度范围,测量误差小于10%,满足实际生产需要。     

非相干光纤激光组束中光栅参数的确定

光栅衍射效率是非相干光纤激光组束系统的关键,理论分析和数值仿真表明光栅衍射效率随着光栅频率和光栅厚度的减小而增大。全面综合考虑光栅频率应该选取在200mm-1和400mm-1之间,光栅厚度在1mm到2mm之间。同时提出了一种不等间隔方法提高系统总体衍射效率,该方法较等间隔条件下衍射效率提高了0.1651。     

Scaling and self-similarity in Pb<Subscript>1-x</Subscript>Fe<Subscript>x</Subscript>S nanoparticle films

This paper addresses the issues of scaling and self-similarity in typical nanoparticle films. The role played by microscopic processes contributing to growth on these issues is probed. While we perform this investigation for a specific system viz., Pb_1-xFe_xS nanoparticle films for clarity of the procedures, the analysis is general and can be applied to a variety of systems obtained using different deposition techniques.     

Effect of film thickness on interface and electric properties of BiFeO3 thin films

Bismuth ferrite (BFO) thin films were fabricated by RF-magnetron sputtering deposition method on Pt/Ti/SiO₂/Si(1 0 0) substrate. The effect of the thickness of BFO films varying from 85 to 280 nm on electrical properties was investigated. Saturated coercive fields were found to increase with the BFO film thickness. The dielectric constant of BFO thin films measured at 1 kHz decreased with decreasing thickness from 98 to 86, while tangent losses increased from 0.013 to 0.021. The presence of bismuth oxide at the interface between BFO films and Pt bottom electrodes was responsible for the high leakage currents in thin BFO thin films as was demonstrated by X-ray diffraction, grazing-incident X-ray diffraction, and secondary ion mass spectroscopy analysis.     

Assessing the Apparent Effective Thickness of the Supported Hybrid Bilayer Membranes Consisting of Octadecanethiol and Phospholipid by ac Impedance Spectroscopy

The electrochemical behavior of the gold electrode modified by hybrid bilayer membranes in different concentrations of Fe(CN)₆^3?/Fe(CN)₆^4? was investigated by electrochemical impedance spectroscopy and cyclic voltammetry technology. The electron transfer between gold and the redox species separated by the hybrid bilayers assembly was completed by an electron tunneling process. A detailed equivalent circuit for electron transport across the HBMs is proposed. It was found that the apparent effective thickness of the hybrid bilayer membranes was lower than that of the sum of the chain length of octadecanethiol and phospholipid so some possible collapsed sites might exist at the hybrid bilayer membranes.     

Properties of mixed protein/surfactant adsorption layers

The adsorption isotherms, adsorption kinetics and surface rheological properties of β-lactoglobulin, β-casein, in the absence and presence of Tween 20 were measured. To study the adsorption process (isotherms and kinetics) at the water–air interface the pendant drop technique (axial drop shape analysis, ADSA), and ring tensiometry were used. The surface shear rheological parameters were measured with a torsion pendulum set-up. Also, data of the equilibrium film thickness and surface diffusion coefficients obtained from fluorescence recovery after photobleaching (FRAP) measurements are used to understand the competitive adsorption mechanism. The adsorption process and shear rheological behaviour of the studied systems show a rather complex behaviour which depends most of all on the system's composition. At high protein or surfactant content the behaviour is controlled by the main component while for the more mixed systems the adsorption process is complex and consists of partial adsorption, surfactant–protein interaction and protein rearrangement as a function of surface coverage. The results obtained illustrate that all these processes must be taken into account in future new theoretical models to be derived for such systems.     

浅谈高等教育心理学在大学物理实验教学中的应用——在牛顿环实验中的尝试

随着现代教育的发展,关注大学生的学习心理研究,提高全体学生的学习效率和效果,教育心理学逐步走入课堂,越来越被教育工作者所重视。许多教师广泛采用教育心理学的原理和理论结构来指导自己的教学实践,并且取得了令人满意的成效。本文采用理论联系实际的方法,对高等教育心理学在牛顿环实验教学中的应用进行了有益探索。     

An iterative calculation to derive extinction-to-backscatter ratio based on lidar measurements

The aerosol optical thickness (AOT) is an important parameter for understanding the radiative impact of aerosols. AOT based on lidar measurements is often limited by its finite detection range. In this paper, we have reported a method of fitting and iterative calculation to derive the extinction profile of background aerosols from 0 to 30 km at 532 nm, which is virtually the AOT of the entire atmosphere. The mean extinction derived from this method at the ground level tallies with visibility measurement and it is also consistent with the sun-photometer data, within experimental error. These data have been further treated to study the dust cases. For most of the cases, transmission losses were determined to estimate the extinction as well as lidar ratio. The result of the analysis shows that for background aerosols, a mean lidar ratio of 47±15 sr was found. For dust layers, a mean lidar ratio of 44±19 sr and an optical thickness of 0.53±0.49 were determined at 532 nm.     

具有电子旋转方向的旋转间断的稳定性

用一维混合粒子编码研究了具有电子旋转方向的对称和非对称旋转间断的稳定性。发现在相对窄的过渡层厚度下,具有电子旋转方向的旋转间断是不稳定的,它趋向于发展成离子旋转方向的旋转间断和一些MHD波。这个发展过程部分地受到电子温度的限制。当过渡层厚度增加到足够宽时,电子旋转方向的旋转间断变成稳定的。本文简单地讨论了导致这种旋转间断不稳定的可能原因。     

光学材料热光系数的精确测量——“热光系数仪”

本文介绍用于光学材料系数精确测量的“热光系数仪”。该仪器采用两种干涉仪组合、微机控制和数据采集处理等设计方案,实现了高精度测量。低温区热膨胀系数α、折射率温度系数β热光系数W的测量精度可达±3×10~(-7)°C~(-1)。