Study on oxidation of polymers treated by high LET radiation

The oxidation of medical silicone rubber and segmented polyether urethane which were bombarded with 11.2 MeV Si⁺ or F⁺ at the dose of 5 × 10¹⁴ ions/cm² was studied. In XPS measurements, it was found that the oxygen concentration on the surface of the implanted polymeric membranes had been increasing in three months at least. ESR measurement showed that some free radicals existed in these membranes and their quantities decreased with time. Chemical analysis proved that peroxides were generated in the γ irradiated membranes. The reason for the increasing of oxygen concentration was that free radicals combined with oxygen in the air and produced peroxides on the membrane surface. Moreover, in order to demonstrate the radiation mechanism, low LET (γ rays) radiation of such polymeric membranes was carried out for comparison     

Synthesis and properties of allenic natural products and pharmaceuticals

Nowadays, about 150 natural products comprising an allenic or cumulenic structure are known. The chemistry of these compounds has turned out to be a very attractive and prolific area of interest: advances in the isolation and characterization of new allenic natural products have led to the establishment of efficient synthetic procedures which in many cases also open up an access to enantiomerically pure target molecules. Inspired by the intriguing biological activities of many allenic natural products, allene moieties are now systematically introduced in pharmacologically active classes of compounds (steroids, prostaglandins, amino acids, nucleosides). The functionalized allenes thus obtained often exhibit impressive activities as mechanism-based enzyme inhibitors, cytotoxic, or antiviral agents. A prerequisite for further developments in this field is the efficient stereoselective synthesis of allene derivatives.     

Synthesis of phthalide derivatives using nickel-catalyzed cyclization of o-haloesters with aldehydes

The reaction of o-bromobenzoate (1 b) with benzaldehyde (2 a) in the presence of [NiBr(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane) and zinc powder in THF (24 hours, reflux temperature), afforded 3-phenyl-3H-isobenzofuran-1-one (3 a) in an 86 % yield. Similarly, o-iodobenzoate reacts with 2 a to give 3 a, but in a lower yield (50 %). A series of substituted aromatic and aliphatic aldehydes (2 b, 4-MeC(6)H(4)CHO; 2 c, 4-MeOC(6)H(4)CHO; 2 d, 3-MeOC(6)H(4)CHO; 2 e, 2-MeOC(6)H(4)CHO; 2 f, 4-CNC(6)H(4)CHO; 2 g, 4-(Me)(3)CC(6)H(4)CHO; 2 h, 4-C(6)H(5)C(6)H(4)CHO; 2 i, 4-ClC(6)H(4)CHO; 2 j, 4-CF(3)C(6)H(4)CHO; 2 k, CH(3)(CH(2))(5)CHO; 2 l, CH(3)(CH(2))(2)CHO) also underwent cyclization with o-bromobenzoate (1 b) producing the corresponding phthalide derivatives in moderate to excellent yields and with high chemoselectivity. Like 1 b, methyl 2-bromo-4,5-dimethoxybenzoate (1 c) reacts with tolualdehyde (2 b) to give the corresponding substituted phthalide 3 m in a 71 % yield. The methodology can be further applied to the synthesis of six-membered lactones. The reaction of methyl 2-(2-bromophenyl)acetate (1 d) with benzaldehyde under similar reaction conditions afforded six-membered lactone 3 o in a 68 % yield. A possible catalytic mechanism for this cyclization is also proposed.     

A comparison between the SBR vulcanizates reinforced by magnesium methacrylate added directly or prepared in situ

The styrene-butadiene rubber (SBR) cured by dicumyl peroxide was reinforced by magnesium methacrylate [Mg(MAA)₂], which was added into SBR directly or prepared in situ in SBR through the neutralization of magnesium oxide (MgO) and methacrylic acid (MAA). The experimental results show that the SBR vulcanizates reinforced by Mg(MAA)₂ prepared in situ have better mechanical properties than those reinforced by Mg(MAA)₂ added directly. The SBR vulcanizates with Mg(MAA)₂ prepared in situ are semi-transparent, but those with Mg(MAA)₂ added directly are opaque. The Fourier transform infrared analysis shows that the polymerization conversion of Mg(MAA)₂ in the SBR vulcanizates with Mg(MAA)₂ prepared in situ is much higher than that in the SBR vulcanizates with Mg(MAA)₂ added directly. The scan probe microscopy photographs show that the particles in the SBR vulcanizates with Mg(MAA)₂ prepared in situ are much finer and disperse more evenly than that in the SBR vulcanizates with Mg(MAA)₂ added directly.     

液-液萃取电感耦合等离子体质谱法测定天然水中痕量稀土元素

建立了以单、二（2－乙基己基）磷酸酯混合螯合剂的庚烷溶液作为萃取剂，6.0mol/L HCl反萃取预分离富集，In和Rh做内,ICP-MS测定天然水中15种稀土元素的分析方法。方法的富集倍数为200倍，各元素的检出限范围在0.01-1.8ng/L之间，相对标准偏差RSD＜5％，萃取回收率＞93％。     

Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.     

带甲基侧基的环氧树脂增容剂对炭黑在丁苯橡胶中分散度的影响

用自制的带甲基侧基的环氧树脂(TMBP)作为界面增容剂, 从拉伸性能、键合胶含量、动态性能、扫描电镜和流变性能等方面, 研究了TMBP对炭黑在丁苯橡胶中分散度的影响, 并与市售通用双酚A型环氧树脂(E-51)和橡胶工业常用软化剂邻苯二甲酸二辛酯(DOP)进行了比较. 结果表明, 带甲基侧基的环氧树脂TMBP在提高炭黑分散性方面的效果远比E-51好， 其作用模式具有典型的增容特性.     

基于天然氨基酸的双环手性季铵盐相转移催化剂的合成及催化性能研究

以L－脯氨酸及L－羟基脯氨酸为原料合成了4个新型手性季铵盐磁相转移催化 剂，并用于催化不对称查耳酮环氧化反应，高产率得到相应环氧化合物，ee最高达 9％。     

Steam-carbon gasification catalyzed by calcium: Assessment of the porous structure of active carbons from plum stones and synthetic active carbons

A need for an elaboration of the methods for synthesis and characterization of activated carbons with a requisite porous structure has existed for a long time. One of the methods giving possibility for creating controlled mesopore and micropore structures deals with the steam gasification of various carbon materials. In this work the effects of calcium catalyst on the catalytic steam gasification of active carbons from plum stones and porous polymers are presented. Determination of micropores capacity and specific adsorption in mesopores have been performed by means of the _s method, but adsorption on the heterogeneous solids was described by the integral equation with various local isotherms. This equation has been solved by the regularization method. Based on this method the changes in structural parameters of active carbons depending on the amount of calcium catalyst were estimated.Nomenclature d width of slit-like micropore - F(x) distribution function of the half-width - p vapor pressure of sorbate - p/p _N relative pressure - PSAC Plum Stone Active Carbon - average pore radius, nm - S ₁ relative limit of the validity of experimental point on the adsorption isotherm in the computations by means of regularization method - SAC Synthetic Active Carbon - S _BET specific surface area calculated by means of BET method, m²/g - S _mes mesopore surface area, m²/g - S _mic micropore surface area, m²/g - T absolute temperature, K - V _mes sorption capacity of mesopores, cm³/g - V _mic sorption capacity of micropores, cm³/g - V _p sorption capacity of pores, cm³/g - w/w weight in weight concentration - x half-width of slit-like micropore, nm - x ₁ maximum of half-width of micropore slit, nm - average half-width of slit-like micropore, nm - X _min-X _max integration limits of thex Greek Letters Greek Letters variance of average half-width of slit-like micropore, nm² - local relative filling of micropores - total relative filling of micropores     

Ring‐Rearrangement Metathesis

Ring‐rearrangement metathesis (RRM) refers to the combination of several metathesis transformations into a domino process, in which an endocyclic double bond of a cycloolefin reacts with an exocyclic alkene. RRM has proven to be a powerful method for the rapid construction of complex structures. The extension of the basic ring‐opening–ring‐closing metathesis process by further metathesis steps as well as an examination of the driving forces, limits, scope, recent advantages, and future perspectives of these domino sequences is presented with various examples, thus reflecting the high efficiency and utility of RRM in organic synthesis.