35Cl NQR studies of 1‐chloro‐2,4‐dinitrobenzene and 1,2‐dichloro‐3‐nitrobenzene as a function of pressure and temperature

The temperature and pressure dependences of ³⁵Cl nuclear quadrupole resonance (NQR) frequency and spin–lattice relaxation time (T₁) were investigated for 1‐chloro‐2,4‐dinitrobenzene and 1,2‐dichloro‐3‐nitrobenzene. T₁ was measured in the temperature range 77–300 K. Furthermore, the NQR frequency (ν) and T₁ for these compounds were measured as a function of pressure up to 5.1 kbar at 300 K. Relaxation was found to be due to the torsional motion of the molecule and the reorientation motion of the nitro group. By analysing the temperature dependence of T₁, the activation energy for the reorientation motion of the nitro group was obtained. The temperature dependence of the average torsional lifetimes of the molecules and the transition probabilities W₁ and W₂ for the Δm = ±1 and Δm = ±2 transitions, were also obtained. Both compounds showed a non‐linear variation of NQR frequency with pressure. The pressure coefficients were observed to be positive. A thermodynamic analysis of the data was carried out to determine the constant‐volume temperature coefficients of the NQR frequency. The spin–lattice relaxation time T₁ for both the compounds was found to be weakly dependent on pressure, showing that the relaxation is mainly due to the torsional motions. Copyright © 2002 John Wiley & Sons, Ltd.     

A novel route to prepare pH- and temperature-sensitive nanogels via a semibatch process

A novel method via a semibatch process in the absence of surfactant has been adopted to prepare pH- and temperature-sensitive nanogels. The shape, charge distribution, temperature, and pH-induced volume phase transition behavior of the latexes were investigated by scanning electronic microscopy, zeta potentials, dynamic laser light scattering, and UV/vis spectroscopy. It was found that, in the absence of surfactant, with increasing the amount of AAc from 5 to 20 mol% of N-isopropylacrylamide (NIPAM), the hydrodynamic diameters (D_H) decrease from 230 to 60 nm. With increasing pH value from 3 to 11, the D_H values increase slightly, which is different than the dramatic increase seen when using a conventional batch method with a range from 680 to 1700 nm. However, at pH 3, the turbidity curves of these kinds of particles increase dramatically at temperatures between 33 and 37 °C, while remaining constant at first and then increasing directly at pH 11. Furthermore, the distribution of carboxylic groups located not only on the interior but also on the exterior of colloidal particles as a result of adoption of the semibatch method, other than simple surface distribution of poly(NIPAM-co-AAc) latexes via the batch method.     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Studies of the naturally occurring biomethylation of selenium and the determination of the products

A systematic study of the biomethylation of selenium and the determination of the methylated species indicates preliminarily that selenium is susceptible to natural biomethylation under certain environmental conditions. Detectable levels of methylated selenium species, including dimethyl selenide [(CH₃)₂Se], dimethyl diselenide [(CH₃)₂Se₂] and dimethylselenone [(CH₃)₂SeO₂] have been detected by gas chromatography – graphite furnace atomic absorption spectrophotometry (GC – GF AA) from a variety of environmental samples. Findings of naturally methylated selenium species from both soil samples and related air samples suggest that there may exist a localized cycle of selenium between ground soil and the ambient air. Factors that influence the sensitivity and accuracy for the determination of alkyl selenide compounds by GC – GF AA have also been investigated. Flashlike injection mode and addition of about 10% of hydrogen gas to the argon carrier gas provide for highly sensitive detection. Reproducible determination can be obtained with a precision of about 6% and the detection limits are 0.3 ng Se m^?3.     

空腔靶能量吸收,转换特性实验研究

本文介绍空腔靶设计的物理思想、及能量吸收特性、X光转换特性和堵腔特性的实验研究方法,给出了实验观察到的一系列物理现象,通过对现象的分析而得出空腔靶的能量吸收和X光转换明显优于平面靶;利用相对孔径较大的聚焦透镜打空腔靶有利于改善靶的能量吸收和转换特性的结论。     

Shear buckling modes of cylindrical sandwich shells under external pressure, tension-compression of bearing layers with unequal forces, and inhomogeneous across-the-thickness temperature

Equations are set up for describing, in a correct statement and with an accuracy sufficient in actual practice, the shear buckling modes (BMs) of cylindrical sandwich shells with a transversely soft core of arbitrary thickness. Based on them, solutions are obtained to a number of problems on the buckling instability according to shear modes under some force and thermal loadings. It is found that the BMs occur in the shell along the circumferential and axial directions if, in the precritical state, a normal compressive stress arises in the transverse direction. It is shown that this condition is fulfilled in the following cases: in axial tension of the shell with unequal forces applied to the end faces of bearing layers (the parameter of critical load is maximum if the tensile forces are equal); under external (internal) pressure; on cooling the outer and heating the inner layers. The results obtained are presented in the form of simple analytical formulas for determining the corresponding critical parameters of the force and thermal actions.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 37–48, January–February, 2005.     

Fluctuations of order parameters in the highT c superconductors

Recently we have proposed a phenomenological approach in terms of two coexisting macroscopic order parameters corresponding to the superconducting and insulating states and have discussed the electrodynamical responses of the superconducting ceramics. In this paper we discuss the fluctuations of the order parameters both in static and dynamical situations in the mean field approach and obtain results for the electrical conductivity which possesses anomalies as in granular materials.     

Analysis of aluminum alloys by resonance-enhanced laser-induced breakdown spectroscopy: How the beam profile of the ablation laser and the energy of the dye laser affect analytical performance

In resonance-enhanced laser-induced breakdown spectroscopy, the sample was ablated by a laser pulse and the expanding plume was photoresonantly rekindled by a dye laser pulse. By sampling aluminum alloys for Mg, Pb, Si, and Cu, we showed that for the ablation step, Gaussian beams gave 2 to 3× better signal-to-noise ratio (SNR) than non-uniform beams. For the rekindling step, if no further sample destruction was allowed, dye laser pulses that intercepted the plume transversely gave 6 to 12× higher SNR than the longitudinal case. By combining Gaussian beams and transverse rekindling, the mass limit-of-detection for Mg was about 100 amol while non-resonant analysis was 10× more destructive. Sub-monolayer of oxides grown on laser-cleaned aluminum surfaces was detected by monitoring the AlO emissions of rekindled plumes; without resonant enhancements, they were not detectable no matter how destructive was the analysis. Time resolved studies showed that the Gaussian beam produced less dispersed plumes and that a stronger dye laser beam directed transversely heated up a bigger plume mass without over-heating the plume core. The analyte emissions were sustained while the continuum background remained low.     

Controlled Synthesis of CdClOH Sub-nanocones by Low-temperature Solution Process and Their Transformation into CdS Hollow Sub-nanocones

Novel CdClOH sub‐nanocone crystals were successfully synthesized on a large scale by a facile solution‐based method using polymers as crystal growth modifiers. The crystals showed cone‐like morphology. Some factors affecting the morphology and size of the product, such as reaction temperature, concentrations of polyacrylamide (PAM), and pH value of the solution, were systematically studied. Experiments implied that polymer PAM played a key role in the formation of CdClOH sub‐nanocones. A possible formation mechanism of CdClOH sub‐nanocones was suggested based on nucleation‐etching process‐recrystallization in a mild aqueous solution. Furthermore, the as‐prepared CdClOH sub‐nanocones could be further transformed into CdS hollow sub‐nanocones by an anion‐exchange reaction.