安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

Highly tilted antiferroelectric (R) enantiomers useful for the formulation of eutectic mixtures

ABSTRACT

Novel chiral three-ring (R) enantiomers were synthesised using optically active (R)-(?)-2-octanol. Properties, such as the sequence of phases, the transition temperatures and enthalpies, were tested by a polarising optical microscope and differential scanning calorimeter. An antiferroelectric smectic phase (SmC_A*) with a direct transition from the antiferroelectric to the isotropic phase (SmC_A*-Iso) was observed for three esters with an achiral C₃F₇CH₂O(CH₂)₃O– terminal chain. Bi- and multicomponent mixtures with a broad temperature range of the antiferroelectric phase and good electro-optical properties were formulated. Helical pitch of pure esters and mixtures was measured by spectrophotometry method.     

The effect of the counterion composition on the chain restriction in the cationic polymerization of isobutylene

The effects of the nature of halogens in the initiatingtert-butyl halide-aluminum-containing Lewis acid system on the number average molecular weightM _n and the structure of end groups of polyisobutylene macromolecules obtained in the cationic polymerization of isobutylene in hexane at -78 °C were studied. An increase inM _n is observed in the transition from chlorine to bromine and iodine, accompanied by a decrease in the fraction of end C=C groups and an increase in the relative content of C-Hal groups (Hal = Cl, Br, and I). When atoms of different halogens are present in the counterion, more bulky atoms preferentially participate in the formation of the end groups. The results are interpreted within the framework of the principle of hard and soft acids and bases.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1184–1187, May, 1996.     

控制异丁烯阳离子聚合终止方式的新方法—活性中心转化法

控制异丁烯阳离子聚合终止方式的新方法──活性中心转化法曹宪一，王强，武冠英（北京化工大学高分子材料研究所，北京，１０００２９）关键词异丁烯，阳离子聚合，活性中心转化自八十年代中期Ｈｉｇａｓｈｉｍｕｒａ及Ｋｅｎｎｅｄｙ等人陆续发现乙烯基醚类单体及异丁烯...     

Design and fabrication of 2 kHz nematic liquid crystal variable retarder with reflection mode

ABSTRACT

This study proposes a simple method of designing a high-speed liquid crystal variable retarder (LCVR) with reflection mode. First, a series of simple formulas is provided for analysing the effects of tilt incidence and birefringence of the liquid crystal on the phase retardation and response time of the LCVR. Then, a reflective LCVR is fabricated to validate the theoretical analysis. Measured results show that the response speed can reach 2.7 kHz with a phase retardation of 1 λ. Furthermore, the theoretical curve is close to the measured curve while the incident angle is less than 10°. However, the theoretical and measured values show a considerable difference under a large incident angle. This problem is discussed, and a modified method is given. This work is helpful for the design and fabrication of high-speed LCVR.     

恒电流库仑法测定基准试剂三氧化二砷的含量

用恒电流库仑法测定基准试剂三氧化二砷的含量，以恒电流通过含有碘化钾，基准试剂三氧化二砷试样的弱碱性水溶液，利用工作电极铂阳极上电生滴定剂I2与亚砷酸盐定量反应，以死停终点法确定滴定终点，测量出电解电流和电解时间，根据法拉第电解定律并利用EXCEL计算出基准试剂三氧化二砷的含量。方法的回收率为100％。     

Cationic polymerization of hydrocarbon monomers induced by complexes of acyl halides with Lewis acids 5. Polymerization of isobutylene in the presence of the complexes of benzoyl chloride with aluminum bromide

Polymerization of isobutylene inn-hexane at -78 °C in the presence of the complex of benzoyl chloride with AIBr₃ (1 : 2) was investigated. The results were compared to those obtained previously for the polymerization of this monomer induced by the complex of acetyl bromide with AlBr₃. Both complexes initiate the polymerization only by acyl cations. The number average molecular weight (M _n ) of the polymer linearly increases as the degree of isobutylene conversion increases. The polymerization restarts after repeated addition of the monomer, andM _n continues to increase linearly. The efficiency of the initiaton by the benzoyl chloride complex does not exceed 6.2 %; the reaction has the second order with respect to the initiator in the case of PhCOCI · A1₂Br₆; and the chain-propagation rate constant is 13.9 L mol^–1 s t. The use of PhCOCI Al₂Br₆ as the initator of the polymerization of isobutylene allows one to prepare macromolecules with very low contents of the terminal C=C double bonds and with narrow molecular weight distributions. Unlike the MeCOBr·AlBr₃ complex, PhCOCl · AlBr₃ does not initiate polymerization of isobutylene.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1175–1179, May, 1996.     

Description of the turbidity measurements near the phase transition temperature of poly(N-isopropyl acrylamide) copolymers: the effect of pH, concentration, hydrophilic and hydrophobic content on the turbidity

Absorbance values between 300 and 800 nm of aqueous solutions of poly(N-isopropyl acrylamide-co-itaconic acid-9.80), poly(N-isopropyl acrylamide-co-itaconic acid-52.05) and poly(N-isopropyl acrylamide)s containing Tegomer H-Si 2111 end groups and/or blocks were measured using a Shimadzu 160-A UV-visible spectrometer. Turbidities obtained from these absorbance values were used to interpret the macromolecular phase transition from a hydrophilic to a hydrophobic structure of the polymers. The effects of comonomer type and content, concentration of the solutions, pH and temperature on the coil-globule transition were discussed in terms of turbidity form factor, β related to size and shapes of particles and calculated by using the simplified form of Debye equation.The results presented in this work show that the presence of Tegomer H-Si 2111 (Si containing end groups and/or blocks) or high amount of itaconic acid (IA) in the chains prevent a collapse transition from hydrated extended coils to hydrophobic globules, which aggregate and form a separate phase (β<2). Furthermore, it was observed that in the case of concentrated solutions intermolecular hydrophobic interactions between isopropyl groups overcame the repulsive forces resulting from the ionized carboxylic acid groups of IA or surface active nature of Si containing hydrophobic groups (β>2). This stage of the transition corresponds to macroscopic phase separation after an intramolecular process.     

Exact rotamer optimization for protein design

Computational methods play a central role in the rational design of novel proteins. The present work describes a new hybrid exact rotamer optimization (HERO) method that builds on previous dead-end elimination algorithms to yield dramatic performance enhancements. Measured on experimentally validated physical models, these improvements make it possible to perform previously intractable designs of entire protein core, surface, or boundary regions. Computational demonstrations include a full core design of the variable domains of the light and heavy chains of catalytic antibody 48G7 FAB with 74 residues and 10(128) conformations, a full core/boundary design of the beta1 domain of protein G with 25 residues and 10(53) conformations, and a full surface design of the beta1 domain of protein G with 27 residues and 10(60) conformations. In addition, a full sequence design of the beta1 domain of protein G is used to demonstrate the strong dependence of algorithm performance on the exact form of the potential function and the fidelity of the rotamer library. These results emphasize that search algorithm performance for protein design can only be meaningfully evaluated on physical models that have been subjected to experimental scrutiny. The new algorithm greatly facilitates ongoing efforts to engineer increasingly complex protein features.