Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

Integrated chemical sensor array platform based on a light emitting diode, xerogel-derived sensor elements, and high-speed pin printing

We report a new, solid-state, integrated optical array sensor platform. By using pin printing technology in concert with sol-gel-processing methods, we form discrete xerogel-based microsensor elements that are on the order of 100 μm in diameter and 1 μm thick directly on the face of a light emitting diode (LED). The LED serves as the light source to excite chemically responsive luminophores sequestered within the doped xerogel microsensors and the analyte-dependent emission from within the doped xerogel is detected with a charge coupled device (CCD). We overcome the problem of background illumination from the LED reaching the CCD and the associated biasing that results by coating the LED first with a thin layer of blue paint. The thin paint layer serves as an optical filter, knocking out the LEDs red-edge spectral tail. The problem of the spatially-dependent fluence across the LED face is solved entirely by performing ratiometric measurements. We illustrate the performance of the new sensor scheme by forming an array of 100 discrete O₂-responsive sensing elements on the face of a single LED. The combination of pin printing with an integrated sensor and light source platform results in a rapid method of forming (∼1 s per sensor element) reusable sensor arrays. The entire sensor array can be calibrated using just one sensor element. Array-to-array reproducibly is <8%. Arrays can be formed using single or multiple pins with indistinguishable analytical performance.     

Green-synthesized,low-cost tetracyanodiazafluorene (TCAF) as electron injection material for organic light-emitting diodes

As facile,green,low-cost as possible:One more electron-deficient azaacene (TCAF) with deep LUMO (-4.52 eV), strong electronic affinity,excellent yield,and simple purification procedure was successfully created and explored as good electron injection material.It is believed TCAF would be a promising and pervasive acceptor material and bring in more significant achievements to green and sustainable organic electronics including OLEDs,OFETs,OPVs, and perovskite solar cells,etc.     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Determination of amino acids in tea leaves and beverages using capillary electrophoresis with light-emitting diode-induced fluorescence detection

The combination of capillary electrophoresis (CE) and light-emitting diode-induced fluorescence (LED-IF) detection has been demonstrated in the analysis of major amino acids in tea leaves and beverages. The separation efficiency of amino acids, which were derivatized with naphthalene-2,3-dicarboxaldehyde (NDA), depended on the capillary length and PEO concentration. We suggested that the interactions between the NDA derivatives and poly(ethylene oxide) (PEO) molecules are based on hydrogen bonding, hydrophobic patches, and Van der Waals forces. The magnitude of EOF and the interactions between them can be further controlled by the capillary length. The separation of 17 NDA-amino acids derivatives was completed within 16 min using 0.5% PEO and 60 cm capillary length. The relative standard deviations (R.S.D.) of their migration times (n = 5) were less than 2.7%. Additionally, the limits of detection at signal-to-noise ratio 3 for the tested amino acids ranged from 3.6 to 28.3 nM. Quantitative determination of amino acids in tea leaves and beverages was accomplished by our proposed method. This study showed that amino acid present in highest concentration in tea leaves and beverages is γ-aminobutyric acid and theanine, respectively. The experimental results suggest that our proposed methods have great potential in the investigation of the biofunction of different tea samples.     

Development of a stabilized low temperature infrared absorption cell for use in low temperature and collisional cooling experiments

We have constructed a stabilized low temperature infrared absorption cell cooled by an open cycle refrigerator, which can run with liquid nitrogen from 250 to 80K or with liquid helium from 80K to a few kelvin. Several CO infrared spectra were recorded at low temperature using a tunable diode laser spectrometer. These spectra were analyzed taking into account the detailed effects of collisions on the line profile when the pressure increases. We also recorded spectra at very low pressure to accurately model the diode laser emission. Spectra of the R(2) line in the fundamental band of 13CO cooled by collisions with helium buffer gas at 10.5K and at pressures near 1 Torr have been recorded. The He-pressure broadening parameter (gamma(0) = 0.3 cm(-1) atm(-1)) has been derived from the simultaneous analysis of four spectra at different pressures.     

Use of Extraction Disks for Trace Enrichment of Various Pesticides from River and Sea Water Samples

Abstract

C-18 Empore extraction disks were used for the isolation and trace enrichment of different groups of pesticides from river water and artificial sea water at concentration levels of 0.2, 5 and 20 μg/l [chlorotriazines, (atrazine and simazine), their dealkylated metabolites, (deethyl- and deisopropylatrazine), organophosphorus (parathion-ethyl), phenylurea (linuron), anilide (propanil), carbamate (aldicarb and carbofuran) and carbamate transformation products (aldicarb sulfoxide, aldicarb sulfone and 3-hydroxy-7-phenol carbofuran]. The extraction disks allowed high flow rates thus 51 samples could be processed within 2h. 30 min.

For most of the pesticides the recoveries, as determined by liquid chromatography with diode array detection (LC-DAD), varied from 74 up to 125% with coefficients of variations (CV) of 5-10%, whereas for the carbamate transformation products the recoveries were in the range of 30-35% having a CV of 17-21%. At spiking level of 0.2 μg/l the dealkylated triazine metabolites and the carbamate transformation products were not detected at all.     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092