交叉增益调制型波长转换器噪声特性的研究

对基于半导体光放大器的交叉增益调制型波长转换器相向和同向两种工作方式进行了研究。实验上分别实现了两种工作方式在1550nm波段的波长转换,比较了相同外部条件下两种工作方式的噪声特性,在全面考虑放大自发辐射噪声及其消耗载流子,增益谱的色散性和有源区内部损耗等因素的基础上,运用放大器的分段模型,计算了不同条件下两种方式的输出噪声功率,结果表明：相向型工作方式受放大自发辐射噪声的影响要远大于同向工作方式,输出放大自发辐射噪声功率的大小主要取决于载流子浓度的高低,而载流子空间分布的不均匀程度则决定两种工作方式输出噪声功率的差值大小。     

35MeV/u 40 Ar+197 Au反应中热核的碎裂密度

许多提取核反应过程中熵产生的方法只适用于高能核反应过程 ,而约化d的产额方法可以用于较低能量的重离子核反应中 .对于 3 5MeV/u40 Ar+ 197Au的核反应过程 ,利用这种方法所得的熵和约化带电粒子多重性提取的熵结果一致 .对于后角热核发射体系 ,实验提取的核温度为 ( 4.7± 1 .2 )MeV ,熵为S/A =2 .5± 0 .5,根据实验提取的熵和核温度可以确定其碎裂密度小于 0 .1 ρ0     

35MeV/u~(40)Ar ~(197)Au中的熵产生

根据量子统计模型 (QSM )的计算分析 ,找到了一个提取核反应过程中熵产生的新的可观测量 .核反应过程中约化d的产额d/ (d t 3 He 4 He)和熵有单调的函数关系 ,并且和体系的碎裂密度 (ρ/ ρ0 )及体系的N/Z都无关 ,可以作为提取核反应过程中熵产生的一个观测量 .和目前已经有的其他方法相比 ,约化d产额这一提取熵方法可以用于较低能量的重离子核反应中 ,并且数据处理分析简单 .对于 35MeV/u4 0 Ar 197Au的核反应过程所提取的熵和利用约化带电粒子多重性提取的熵结果一致 .结合后角类靶热核发射体系实验提取的同位素核温度为 4 7±1 2MeV及S/A =2 5± 0 5 ,根据熵和核温度的关联关系 ,可以确定其Breakup密度接近但小于 0 1(ρ/ ρ0 )     

Changes in vocal intensity in Parkinson's disease following pallidotomy surgery

The present study was designed to examine changes in vocal intensity following unilateral posteroventral pallidotomy (PVP) in a large sample of speakers with Parkinson's disease (PD) that exhibited a range of hypokinetic dysarthria. Twenty-five persons with PD were recorded using a variety of speech tasks, once prior to and once following PVP. The pre-PVP vocal SPL was subtracted from the post-PVP vocal SPL to derive a relative change in vocal SPL. Mildly dysarthric participants had significantly greater relative increases in vocal SPL following PVP than either moderately or severely dysarthric participants who had reduced vocal SPL following PVP. If future results follow those observed in the present data, mildly dysarthric Parkinson's patients may benefit most from unilateral PVP perhaps due to less overall destruction of the basal ganglia sensorimotor control circuits involved in oral facial functions, thus increasing the chances to observe improvements postsurgery.     

用定性定量系列演示整治静电教学中的顽症

本文针对静电学教学中出现的一些重点、难点，提出了定性定量的演示方案。     

平行共轴线圈的磁场特征研究与实验设计

通过计算机及相关的传感器和数据采集接口辅助,研究了平行共轴双线圈间距分别为0.5R,R,1.5R时,轴线方向磁场强度的分布规律及特征.从平行共轴双线圈间距为R的亥姆霍兹线圈所形成的均匀磁场出发,结合理论推导,自己设计并组装了三线圈实验装置,实现了平行共轴三线圈均匀磁场区域扩大、强度增强的实验设计,在一定程度上弥补了传统亥姆霍兹线圈磁场测量的不足并有助于对其深入的理解和研究.     

Back focal plane imaging of Tamm plasmons and their coupled emission

The unique optical properties of Tamm plasmons (TPs) – such as flexible wavevector matching conditions including inplane wavevector within the light line, and existing both S‐ and P‐polarized TPs − facilitate them for direct optical excitation. The Tamm plasmon‐coupled emission (TPCE) from a combined photonic–plasmonic structure sustaining both surface plasmons (SPs) and TPs is described in this paper. The sensitivity of TPCE to the emission wavelength and polarization is examined with back focal plane imaging and verified with the numerical calculations. The results reveal that the excited probe can couple with both TPs and SPs, resulting in surface plasmon‐coupled emission (SPCE) and TPCE, respectively. The TPCE angle is strongly dependent on the wavelength allowing for spectral resolution using different observation angles. These Tamm structures provide a new tool to control the optical emission from dye molecules and have many potential applications in fluorescence‐based sensing and imaging.     

小麦超弱延迟发光测试系统

应用一种新型高灵敏度光电倍增管作为传感器,设计一套用于检测小麦超弱发光的光子计数测量系统,实现对储藏小麦超弱发光的定量测量.适当安排LED阵列分布,设计适合延迟发光需要的照明系统,通过对白光LED光源辐射等效单光子能量和流明效率的计算,建立起光照度与光子数强度之间的联系,实现了光源照射强度与样品延迟发光强度之间的定量比较.对不同光照强度下小麦样品延迟发光的测试和双曲函数拟合,探讨了小麦超弱延迟发光双曲函数拟合参量的变化规律;发现不同照射强度下存在不同的饱和照射时间;小麦超弱延迟发光强度曲线符合双曲衰减规律,超弱延迟发光持续时间达数小时.通过对光照时间和数据采集时间的精确控制,以及在拟合函数中设置延迟时间参量因子,实现了延迟发光测试数据对应时间点的精确标定.     

Synthesis of resonant cavities having continuum spectra by genetic algorithm

This paper proposes a novel method for generating continuum spectra with possible applications in WDM access networks. This new method would allow the development of a simple continuum laser structure with better performances in terms of cost and simplicity than those of present supercontinuum sources. In this aim, we will analyze the possibility to broaden the resonant modes of a Fabry–Perot cavity by operating only on the design of one of the cavity's Bragg mirrors. Firstly we considered the conditions which a Bragg grating must satisfy in order to broaden the resonant modes of a resonant cavity. Because an exact solution is not physical possible, the genetic algorithm is the best available tool for the design of such a grating. An active medium is then added inside the cavity and its behavior below threshold is simulated. The spectra thus simulated are continuum over 5–15 nm.