飞秒激光脉冲在三能级有机分子介质中传播时的频谱分析

通过采用预估校正的时域有限差分法求解麦克斯韦-布洛赫方程,我们研究了飞秒激光脉冲在三能级有机分子(4,4-二甲氨基二苯乙烯分子)介质中传播时脉冲的频谱演化情况.在单光子共振情况下,即入射脉冲频率等于1、2能级之间的共振频率,对大面积入射脉冲,由于强的二次激发的作用,电场频谱中出现了在ω32附近振荡的频率成分,ω32是2、3能级之间的共振频率,说明对大面积入射脉冲二能级模型已经失效,需要采用多能级模型来描述分子介质.在双光子共振情况下,即入射脉冲频率等于1、3能级之间的共振频率的一半,由于介质中放大的自发辐射和四波混频的作用,部分入射脉冲能量转化为高频和低频电场成分的能量,分子介质表现出了很强的光功率限幅特性.     

极小孔半导体激光器近场区光场分布研究

利用时域有限差分法(FDTD)计算和分析了极小孔半导体激光器输出光端面附近的光场分布,指出小孔激光器近场区域光场分布的特点,讨论了小孔大小和金属厚度对光场分布和光源分辨率的影响,得到设计和制备极小孔半导体激光器的优化方法.     

Chemical Reactions in the Manufacture of Waveguides for Long Distance Optical Data Transmission

One of the modern high technologies which has advanced enormously in the last few years is glass fiber technology. This is used in the manufacture of glass fibers for lighting purposes and for the optical transfer of analog and digital data with a high transfer density. The technical demands made on the glass fibers required for data transfer, the optical waveguides, are extremely high and are already fulfilled to a large extent by industry. At present about four million kilometers of fiber, worth ca. 800 million DM are produced worldwide (10% in the Federal Republic of Germany). Numerous chemical processes take place during the manufacture of optical waveguides. However, in contrast both to the high and constantly growing demands on the quality and to the increasing production volume of such fibers, little is in fact known about the reactions involved. The present article will attempt to develop a picture of the multifarious reactions occurring in the course of this technical process on the basis of literature data and our own studies.     

Fabrication of ultrathin films with large third-order nonlinear optical properties.

An ultrathin composite film containing anionic Ag-His complexes (His: L-Histidine) and oppositely charged BH-PPV was fabricated by means of the electrostatic layer-by-layer self-assembly technique. UV/Vis spectra showed a continuous deposition process of Ag-His complexes and BH-PPV. The film structure was characterized by using small-angle X-ray diffraction, AFM, and SEM. The nonlinear optical properties of the ultrathin film were studied by using the Z-scan technique with a laser duration of 8 ns at a wavelength of 532 nm. The film sample exhibited a strong nonlinear saturated absorption, with an alpha2 value of -3.9 x 10(-5) mW(-1) and a self-defocusing effect with an n2 value of -4.78 x 10 (-12) m2W(-1).     

Novel fiber-optic biosensor based on immobilized glutathione S-transferase and sol–gel entrapped bromcresol green for the determination of atrazine

The aim of this work was to investigate, for the first time, the potential of the enzyme glutathione S-transferase I (isoenzyme GST-I) for uses in analytical chemistry. A novel fiber-optic biosensor for the detection and determination of the triazine herbicide atrazine was developed based on maize GST-I expressed in E. coli. The sensing bioactive material was a three-layer mini-sandwich. The enzyme was immobilized on the outer layer that consisted of a hydrophilic polyvinylidenefluoride membrane. This membrane was supported on an inner glass disk by means of an intermediate binder sol–gel layer that incorporated bromcresol green (BCG). The biosensor operated in a static mode at 25 °C and the rate of the enzymatic reaction, using atrazine as a substrate, served as an analytical signal. A calibration curve was obtained for atrazine, with analytically useful concentration range 2.52–125 μM. The sensor detection limit was 0.84 μM. The reproducibility of atrazine sensing was in the order of ±3–5%. The method was successfully applied to the determination of this herbicide in real water samples, without sample preparation steps. Atrazine recovery ranged between 85 and 110%. No interference from other pesticides, such as alachlor and carbaryl was observed in the absence of atrazine. The immobilized enzyme retained about 75% of its original activity after 1 month use. Simply unscrewing the terminal holding ring of the probe and placing a new bioactive sandwich could easily replace a deteriorated mini-sandwich.     

Two-photon absorption in quadrupolar pi-conjugated molecules: influence of the nature of the conjugated bridge and the donor-acceptor separation

Quadrupolar-type substitution of pi-conjugated chromophores with donor and acceptor groups has been shown to increase their two-photon absorption (TPA) response by up to two orders of magnitude. Here, we apply highly correlated quantum-chemical calculations to evaluate the impact of the nature of conjugated bridge and the charge-transfer distance on that enhancement. We compare chromophores with phenylenevinylene-, thienylenevinylene-, polyene-, and indenofluorene-type backbones substituted by dimethylamino and cyano groups. In all compounds, we find a strongly TPA-active A(g) state (either 2A(g) or 3A(g)) in the low-energy region, as well as a higher lying TPA-active state (mA(g)) at close to twice the energy of the lowest lying one-photon allowed state; the smaller energy detuning in the mA(g) states results in very large TPA cross sections delta. We also investigate the influence of the degree of ground-state polarization on TPA. Independent of the nature of the backbone and the donor-acceptor separation, delta displays the same qualitative evolution with a maximum before the cyanine-like limit; the highest TPA cross sections are calculated for distirylbenzene- and polyene-based systems.     

几个金属卤素簇的合成与性能研究

The hydrothermal reaction of CuBr2 and CuBr with phen·H2O （phen= 1,10-phenanthroline） in a molar ratio of 1：1：1.5 gave birth to the first copper-halo cationic cluster [Cu2^Ⅱ Cu2^Br4 （phen）4 ] ^2＋（1） with tetranuclear anionic cluster [Cu4Br6]^2-. Changing the precursors or their molar ratios, two mononuclear complexes [Cu（phen）2Br]Br·H2O （2） and [Ni（phen）3][CuCl2]2 （3） as well as two unusual copper-halo chains found in polymers [Cu2Br2（phen）]∞ （4） and [Cu^ⅡCu3^ⅠBr2Ⅰ3 （phen）2 ]∞ （5） were obtained. The （Cu2Br2）∞ chain of 4 looks like a linearar ray of hexagons based on fused Cu3Br3 units, and the linear （Cu3Ⅰ3Br^-）∞ chain of 5 is an alternate combination of the rhombic Cu2I2 cores and the Cu4I4Br2^2- units. In addition, the hydrothermal reaction of CuBr2 with NA（NA=nicotinic acid） or INA （INA =isonicotinic acid） resulted in the syntheses of two compounds [CuBr（NA）] （6） and [CuBr（INA）]∞（7） containing staircase chain. Among them the third-order non-linear optical properties of 2, 5, 6 and 7 were investigated and all exhibit the reverse saturable absorption （α2〉0） and self-defocusing performance （n2〈0）.     

Structural dependence of non-linear optical properties of 4-Dimethylamino-3-cyanobiphenyl

 4-Dimethylamino-3-cyanobiphenyl (4-DMA-3-CB) was characterized with respect to linear and nonlinear optical properties in a crystal as well as in solution. The crystal structure was studied dependent on the crystallization conditions. It is shown that the crystal structure exhibiting NLO-activity can completely be solved by a combination of electron diffraction and computer modeling. There are four molecules per unit cell in the space group Pna2₁ with dimensions a=10.28 Å, b=22.64 Å, c=5.27 Å. From this model structure the values and orientation of the dipole μ and static second order polarizability β can be calculated. Their relevance to the values obtained by a combination of polarization dependent measurements of Electric Field Induced Second Harmonic Generation (EFISH) and Hyper-Rayleigh-Scattering (HRS) in solution are discussed. The molecular second order polarizability tensor was found to be dominated by one single component. The orientations of the dipole and the vectorial parts of the second order polarizability delivered by the semiempirical calculations are in good agreement with the results of the EFISH and HRS-measurements and allow a deeper insight into the nonlinear optical properties of the crystal. Received: 15 April 1996 Accepted: 21 June 1996     

Coherent anti-Stokes Raman Scattering Microscopy.

Coherent anti-Stokes Raman scattering (CARS) microscopy is presented as a new nonlinear optical technique. The combination of vibrational spectroscopy and microscopy allows highly sensitive investigations of unlabelled samples. CARS is an ideal tool for studying a broad variety of samples. The main drawback of the technique is its non-zero-background nature, which implies that the signal has to be detected against a nonresonant background. The need to solve this problem is reflected in the rapid technological developments that have been observed during the last decade. Recent results show that CARS microscopy has the potential to become an important complementary technique that can be used with other well-established microscopic methods. Although it has some limitations, it offers unique access to many problems that cannot be tackled with conventional techniques. For this reason, it can be expected that the impressive growth of the field will continue.