Topological polymer chemistry by dynamic selection from electrostatic polymer self-assembly

A collection of recent developments in topological polymer chemistry is presented. First, topological isomerism occurring on randomly coiled, flexible polymer molecules having cyclic and linear structures is discussed. Second, an electrostatic self-assembly and covalent fixation strategy has been developed for the synthesis of polymeric topological isomers. These isomers have double cyclic, manacle-, and theta-shaped constructions, and are prepared by using either linear or star telechelic polymer precursors having moderately strained cyclic ammonium salt groups, which carry multifunctional carboxylate counteranions. A technique of reversed-phase chromatography (RPC) is demonstrated as an effective means to separate polymers with different topologies, especially polymeric topological isomers. A further extension of topological polymer chemistry has been observed by dynamic selection from electrostatic polymer self-assembly to enable the effective formation of tadpole-shaped, cyclic-linear hybrid topologies.     

多色蓝在核酸分子上的Langmuir聚集吸附

用微相吸附-光谱修正（MPASC）新技术研究核酸与多色蓝(PCB)探针分子间的相互作用，分析核酸分子内双静电膜的形成与Langmuir吸附的关联性.通过pH 7.24的介质核酸-PCB反应的光谱研究，测定了结合产物的物理化学参数：结合比1PCB:2DNA-PCB、1PCB:3RNA-PCB, 平衡常数KDNA-PCB=5.42×104， KRNA-PCB=2.82×104,摩尔吸收系数ε(DNA-PCB, 625 nm)=5.65×103（mo1－1•L ）•cm－1， ε(RNA-PCB, 625 nm)=3.85×103 （mol－1•L）•cm－1.结果表明， RNA分子仅形成约60％双螺旋结构链，核酸双螺旋每一周期的负静电沟最大聚集10个PCB分子.该吸附反应用于核酸样品测定，结果良好.     

Tuning the Hybridization of Local Exciton and Charge-Transfer States in Highly Efficient Organic Photovoltaic Cells

Decreasing the energy loss is one of the most feasible ways to improve the efficiencies of organic photovoltaic (OPV) cells. Recent studies have suggested that non-radiative energy loss ( ) is the dominant factor that hinders further improvements in state-of-the-art OPV cells. However, there is no rational molecular design strategy for OPV materials with suppressed . Herein, taking molecular surface electrostatic potential (ESP) as a quantitative parameter, we establish a general relationship between chemical structure and intermolecular interactions. The results reveal that increasing the ESP difference between donor and acceptor will enhance the intermolecular interaction. In the OPV cells, the enhanced intermolecular interaction will increase the charge-transfer (CT) state ratio in its hybridization with the local exciton state to facilitate charge generation, but simultaneously result in a larger . These results suggest that finely tuning the ESP of OPV materials is a feasible method to further improve the efficiencies of OPV cells.     

四氮大环-金属配合物与DNA作用的电化学及谱学研究

Mononuclear copper（Ⅱ）, nickel（Ⅱ） and cobalt（Ⅲ） tetracoordinate macrocyclic complexes were synthesized and spectroscopically characterized. The crystal structure of the three compounds were determined by X-ray crystallography. The electrochemical experimental results indicate that the three complexes could interact with DNA mainly by electrostatic interaction. The interaction of tetracoordinate macrocyclic cobalt（Ⅲ） complex with DNA was studied by cyclic voltammetry and UV-vis spectroscopy. The experimental results reveal that tetracoordinate macrocyc- lic cobalt（Ⅲ） complex could interact with DNA by electrostatic interaction to form a 1 ： 1 DNA association complex with a binding constant of 7.50 ×10^3 L·mol^-1.     

Model of the Negative DC Corona Plasma: Comparison to the Positive DC Corona Plasma

A numerical model of the negative DC corona plasma along a thin wire in dry air is presented. The electron number density and electric field are determined from solution of the one-dimensional coupled continuity equations of charge carriers and Maxwell's equation. The electron kinetic energy distribution is determined from the spatially homogeneous Boltzmann equation. A parametric study is conducted to examine the effects of linear current density (0.1–100 A per cm of wire length), wire radius (10–1000 m), and air temperature (293–800 K) on the distribution of electrons and the Townsend second ionization coefficient. The results are compared to those previously determined for the positive corona discharge. In the negative corona, energetic electrons are present beyond the ionization boundary and the number of electrons is an order of magnitude greater than in the positive corona. The number of electrons increases with increasing gas temperature. The electron energy distribution does not depend on discharge polarity.     

基于三维静电势参数研究C60溶解性的构效关系

在量子化学从头算基础上,对一系列溶剂化合物分子进行了结构优化和三维静电势参数计算,运用多元线性回归分析和神经网络方法对C60在121种不同溶剂的溶解性与计算的结构参数进行了构效关系研究.用建立起来的QSPR 关系式对15种不同结构类型溶剂进行了预测,并阐述了C60溶质与不同溶剂之间的相互作用,获得了满意的结果.     

POLYCATION EFFECTS ON ELECTRONIC SPECTRA OF CONJUGATED POLYMERS IN PROGRAMMED ELECTROSTATIC ASSEMBLIES

A polysaccaride, chitosan, has been used to study polycation effects on electronic spectra of conjugated polymers in programmed electrostatic assemblies. Conjugated polyelectrolytes, poly[2-(3-thienyl)-ethanolhydroxycarbonylmethylurethane] (HPURET) and polydiacetylene from 5,7-dodecadiyn-1,12-bis-(hydroxycarbonylmethylurethane) (HP4BCMU), were assembled from aqueous solution alternately with the polycation, poly (diallydimethylammonium) chloride [PDADMAC], and with the polysaccharide cation, chitosan. Switching polycations did not significantly change the visible absorption spectra for HP4BCMU multilayers. The optical properties of the regiorandom polythiophene, HPURET, depend distinctly on the polycation and the pH of the solution, showing significant differences on visible absorption maxima of the assemblies ranging from 435 nm to 516 nm. After the assemblies were exposed to vapor of aqueous ammonia, they showed UV-vis maxima further red shifted and an enhanced emission intensity, compared to those of the original assemblies. A chitosan/HPURET complex was prepared as a precipitate from solution. Its visible absorption maximum is at 536 nm with a shoulder at 580 nm, reminiscent of regioregular poly(3-alkylthiophenes). This unusual sensitivity of conjugated polymers to polycations may have potential application in sensor devices.     

Toughening hydrogels by immersing with oppositely charged polymers

A very simple yet novel strategy to significantly enhance the mechanical properties of hydrogels is reported. Poly(acrylic acid) (PAA) hydrogels with aligned macroporous channels are immersed in the aqueous solutions of poly(dimethyl diallyl ammonium chloride) (PDMDAAC). Strong electrostatic interactions are formed between the anionic PAA and cationic PDMDAAC chains. In the resultant PAA/PDMDAAC hybrid hydrogels, the mass ratio of PDMDAAC to PAA is about 0.2 and PDMDAAC is uniformly distributed throughout the gels. The mechanical properties of the formed hybrid hydrogels are largely enhanced in comparison with the original PAA hydrogels. The hybrid hydrogels exhibit high tensile strengths (0.38–1.73 MPa), elastic moduli (0.21–1.59 MPa) and toughness (up to 3.0 MJ/m³), about several to more than 10 times those of the corresponding PAA hydrogels. In addition, the PAA/PDMDAAC hydrogels also show excellent and very rapid shape recovery ability in both air and deionized water. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2432–2441     

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8 ), isoamyltriphenylphosphonium perruthenate (ATP3, 7 ) and tetraphenylphosphonium perruthenate (TP3, 9 ) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2 ) and benzoyl peroxide (BPO, 10 ), whereas the most benign were observed to be Oxone ( 12 ), manganese dioxide (MnO₂, 13 ), and N-bromosuccinimide (NBS, 17 ).