β-PbO2/TiO2纳米管电极的制备及其电催化降解苯酚

采用阳极氧化法和脉冲电沉积制备出β-PbO2改性TiO2纳米管(β-PbO2/TiO2-NTs)电极,通过扫描电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等技术手段对制备的β-PbO2/TiO2-NTs电极的表面形貌和结构进行了表征。结果表明,该方法成功地将β-PbO2纳米颗粒分散在TiO2纳米管中,通过电催化降解苯酚评价了β-PbO2/TiO2-NTs电极的电催化活性,实验结果表明,在TiO2-NTs中电沉积β-PbO2提高了电极的电催化活性,对苯酚的降解达到83%。     

Ag/C包覆对Li[Li0.2Mn0.54Ni0.13Co0.13]O2电化学性能的影响

运用共沉淀和元素化学沉积相结合的方法,制备出了具有Ag/C包覆层的层状富锂固溶体材料Li [Li0.2Mn0.54Ni0.13Co0.13]O2.通过X射线衍射(XRD)、场发射扫描电子显微镜(SEM)、透射电子显微镜(TEM)、恒流充放电、循环伏安(CV),电化学阻抗谱(EIS)和X射线能量散射谱(EDS)方法,研究了Ag/C包覆层对Li[Li0.2Mn0.54Ni03Co013]O2电化学性能的影响.结果表明,Ag/C包覆层的厚度约为25 nm,Ag/C包覆在保持了固溶体材料α-NaFeO2六方层状晶体结构的前提下,显著地改善了Li[Li0.0Mn054Ni0.13Co013]O2的电化学性能.在2.0-4.8 V (vs Li/Li+)的电压范围内,首次放电(0.05C)容量由242.6 mAh·g-1提高到272.4 mAh·g-1,库仑效率由67.6％升高到77.4％;在0.2C倍率下,30次循环后,Ag/C包覆的电极材料容量为222.6 mAh·g-1,比未包覆电极材料的容量高出14.45％;包覆后的电极材料在1C下的容量仍为0.05C下的81.3％.循环伏安及电化学交流阻抗谱研究表明,Ag/C包覆层抑制了材料在充放电过程中氧的损失,有效降低了Li[Li02Mn0.54Ni0.13Co013]O2颗粒的界面膜电阻与电化学反应电阻.     

High‐Quality Three‐Dimensional Nanoporous Graphene

We report three‐dimensional (3D) nanoporous graphene with preserved 2D electronic properties, tunable pore sizes, and high electron mobility for electronic applications. The complex 3D network comprised of interconnected graphene retains a 2D coherent electron system of massless Dirac fermions. The transport properties of the nanoporous graphene show a semiconducting behavior and strong pore‐size dependence, together with unique angular independence. The free‐standing, large‐scale nanoporous graphene with 2D electronic properties and high electron mobility holds great promise for practical applications in 3D electronic devices.     

BiOI/Bi_2WO_6对甲基橙和苯酚的光催化降解及光催化机理(英文)

采用简单的沉积方法制备了不同碘化氧铋含量的BiOI/Bi2WO6光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HR-TEM)、紫外-可见漫反射光谱(UV-Vis DRS)和BET比表面积测量对其进行了表征。在紫外和可见光的照射下,使用甲基橙和苯酚的光催化降解评价了BiOI/Bi2WO6催化剂的光催化性能。结果表明:与商业P25和纯Bi2WO6相比,13.2%BiOI/Bi2WO6光催化剂具有更高的紫外和可见光催化性能。这明显增加的光催化活性主要归功于光生电子和空穴在Bi2WO6和BiOI界面上的有效转移,降低了电子-空穴对的复合。基于BiOI和Bi2WO6的能带结构,提出了光生载流子的一种转移过程。自由基清除剂的实验表明,·OH,h+,·O2-和H2O2,特别是h+,共同支配了甲基橙和苯酚的光催化降解过程。     

Interconnected sandwich structure carbon/Si-SiO2/carbon nanospheres composite as high performance anode material for lithium-ion batteries

In the present work,an interconnected sandwich carbon/Si-SiO2/carbon nanospheres composite was prepared by template method and carbon thermal vapor deposition（TVD）.The carbon conductive layer can not only efficiently improve the electronic conductivity of Si-based anode,but also play a key role in alleviating the negative effect from huge volume expansion over discharge/charge of Si-based anode.The resulting material delivered a reversible capacity of 1094 mAh/g,and exhibited excellent cycling stability.It kept a reversible capacity of 1050 mAh/g over 200 cycles with a capacity retention of 96%.     

铂纳米粒子和锰卟啉修饰的聚苯胺新材料的制备及表征

借助循环伏安电化学聚合制备了聚苯胺(PANi)/MnT1239卟啉复合材料,再利用还原恒电位沉积法负载铂纳米粒子(Pt NP),最终制备了聚苯胺/MnT1239卟啉/铂纳米粒子复合材料.电沉积铂之后聚苯胺/MnT1239卟啉材料发生明显样貌变化,棒状结构平均直径从90 nm增加到200 nm,材料具有较大的表面积,空间可负载性好.铂纳米粒子平均尺寸在20 nm,附着均匀,氧化峰电流在0.2 V处达到7.4 mA,电化学性能优良.     

Nd,Ce和La改性对Ni/SBA-15催化剂在CH4/CO2重整反应中性能的影响

以稀土金属Nd,Ce或La的氧化物为助剂,采用β-环糊精浸渍法对Ni/SBA-15催化剂进行了改性,并运用X射线衍射、N₂吸附-脱附、程序升温还原和热重等手段考察了改性的催化剂在CO₂重整CH₄制合成气反应中的催化性能. 结果表明,Nd等稀土金属氧化物的添加对催化剂孔结构和晶相结构等性质影响不大,但可影响NiO的还原; Nd的添加使NiO与载体之间以Ni-Nd-O形式相互作用,促进了活性组分NiO的还原. 其中,Nd的添加量为5-10 wt%时所制备的催化剂在重整反应中的催化活性最高,且具有很强的抗积碳性能. La和Ce氧化物促进的Ni催化剂也表现出类似的性质和催化性能.     

Mechanical study on the impact of an effective solvent support-removal methodology for FDM Ultem 9085 parts

The use of support material to produce Fused Deposition Modeling parts is often unavoidable. The support removal task tends to be laborious and time-consuming when no soluble support materials are available, which is the case of the high-performance thermoplastic Ultem™ 9085. This paper investigates the effect of different solvent/solvent mixtures on Ultem’s mechanical properties with the aim to identify a solvent capable of dissolving its support material (a polysulfone) without noticeably damaging the model material. To do so, initial solubility tests have helped narrow the list of solvent candidates. These have been followed by infrared analyses to identify the presence of dissolved polymers in the media, as well as scanning electron microscope micrographs to analyze the surface topography of the treated parts. Finally, tensile and flexural tests have permitted to quantify the change on Ultem’s mechanical properties as a function of the treatment time. Major findings include a reproducible method for softening or eliminating Ultem’s support material with non-significant changes in their mechanical properties. The outcome of this work represents a first step on the lookout for a solution to facilitate the removal of polysulfone and is considered of great interest for the scientific community due to the rise of Ultem as a structural material.     

流动控制沉积法制备PMMA叠层光子晶体薄膜及其光学性能研究

采用流动控制沉积法, 通过调控泵速和聚甲基丙烯酸甲酯(PMMA)胶体微球溶液的浓度, 制备出微球排列高度有序且薄膜紧密附着于基底的高质量光子晶体薄膜. 获得了制备高质量PMMA光子晶体薄膜的组装条件范围, 发现在该条件范围内, 当泵速或胶体微球溶液浓度一定时, PMMA光子晶体薄膜的厚度随胶体微球溶液浓度的增加或泵速的降低而增加. 研究了组装条件对PMMA光子晶体薄膜光学性能的影响, 发现光子禁带位置随光子晶体薄膜厚度增加或减少而红移或蓝移. 在此基础上, 控制组装条件得到了不同尺寸微球堆叠而成的叠层光子晶体薄膜, 并研究了其光学性能的变化规律. 结果显示, 叠层光子晶体薄膜的光子禁带峰为各层叠层光子晶体禁带峰的简单叠加, 且峰强度受光入射角方向影响.