Speciation of selenium(IV) and selenium(VI) in environmental samples by the combination of graphite furnace atomic absorption spectrometric determination and solid phase extraction on Diaion HP-2MG

A simple solid phase extraction procedure for speciation of selenium(IV) and selenium(VI) in environmental samples has been proposed prior to graphite furnace atomic absorption spectrometry. The method is based on the solid phase extraction of the selenium(IV)-ammonium pyrrolidine dithiocarbamate (APDC) chelate on the Diaion HP-2MG. After reduction of Se(VI) by heating the samples in the microwave oven with 4 mol l⁻¹ HCl, the system was applied to the total selenium. Se(VI) was calculated as the difference between the total selenium content and Se(IV) content. The experimental parameters, pH, amounts of reagents, eluent type and sample volume were optimized. The recoveries of analytes were found greater than 95%. No appreciable matrix effects were observed. The adsorption capacity of sorbent was 5.20 mg g⁻¹ Se (IV). The detection limit of Se (IV) (3sigma, n = 11) is 0.010 μg l⁻¹. The preconcentration factor for the presented system was 100. The proposed method was applied to the speciation of selenium(IV), selenium(VI) and determination of total selenium in natural waters and microwave digested soil, garlic, onion, rice, wheat and hazelnut samples harvested various locations in Turkey with satisfactory results. In order to verify the accuracy of the method, certified reference materials (NIST SRM 2711 Montana Soil, NIST SRM 1568a Rice Flour and NIST SRM 8418 Wheat Gluten) were analyzed and the results obtained were in good agreement with the certified values. The relative errors and relative standard deviations were below 6 and 10%, respectively.     

Faster GC analyses performed by flow programming in short capillary columns

The technique of programming the carrier gas flow rate in gas chromatography, especially in connection with the use of capillary columns shorter than 10 m can significantly accelerate GC analyses. Equations for calculation of the parameters of the exponential flow function and retention data are described. The effects of flow programming in a short capillary column are shown in a few chromatograms. Different programming rates are tested and compared with temperature programming.     

Packings and stationary phases for biopolymer separations by HPLC

Summary Packings and stationary phases applied to high resolution separations of proteins, enzymes, and nucleic acids must satisfy a series of distinct criteria that are different from those usually required by HPLC of low molecular weight non-biologically active analytes. These requirements have been met through substantial improvements in classical gel media together with novel developments in silica supports, and have led to a family of products with tailor-made and reproducible properties. Supports consisting of cross-linked organic gels, and inorganic materials (mostly silicas) are now available with graduated particle sizes, pore sizes, porosities and surface areas as well as non-porous beads. A whole range of stationary phases, such as reversed phase, hydrophobic interaction, ion exchanger and affinity packings, were designed for application as chemical sensors for biopolymer recognition in adsorptive chromatography. The phase systems are operated in the gradient mode, giving high resolution and high peak capacities. In addition, aqueous liquid-liquid partitioning systems have been developed for the fractionation of proteins and nucleic acids. Size exclusion media complete the set of HPLC variants enabling a discrimination of proteins according to their size and shape in an isocratic elution mode. Basically, protein purification and isolation is a multistage process where-by the HPLC variants are combined in a logistic sequence, utilizing the different selectivities of the phase systems and thus maximising resolution, speed and throughput.     

N，N-二丁基癸酰胺萃取硝酸有机相结构研究

利用界面张力、电导、FT-IR等研究了不同硝酸浓度下萃取有机相的微结构。利用Gaussian曲线拟合处理N，N-二丁基癸酰胺(DBDEA)的羰基吸收峰，结果表明体系中存在多种以氢键结合的物种如DBDEA·HNO₃、(DBDEA)₂·HNO₃等。在较高酸度下有机相中萃取剂分子自组装成小的聚集体-反相胶团，极性核由水、硝酸和萃取剂高电荷密度的极性部分构成。     

Crystallite Nanosize Effect on the Structural Transitions of WO3 Studied by Raman Spectroscopy

Nanocrystallites of tungsten oxide samples of 2, 4, 16, 35 and 60 nm of diameter were prepared by cryosol and pyrosol techniques. The pressure- and temperature-induced phase transitions of these samples were monitored by Raman spectrometry from 0.1 MPa to 34 GPa and from 77 to 1200 K. The tetragonal (α)-orthorhombic (β)-monoclinic (γ) transitions in these nanometric samples are strongly downshifted in temperature by comparison with the bulk WO₃. For instance, the tetragonal phase which exists above 1171 K for the bulk tungsten oxide can be stabilized at 700 K for the 35 nm sample. In the same way, the monoclinic P2₁/n-monoclinic P2₁/c high-pressure-induced transition is slightly shifted from 0.1 GPa to a higher pressure (1.5 GPa). The discussion of these transition-line shifts is based on thermodynamic considerations in which the surface energy of crystallites plays an important role.     

用三组份同时分离法氨化萃取分离Gd—Tb—Dy

用普通分馏萃取工艺分离物质一次只能分离两个组份,若连续分离多种物质,则需很长工艺流程.文献[1]报导了用N_(26?)萃取分离La-Pr-Nd的三出口串级实验结果.本文报导用氨化HEH(EHP)同时萃取分离Gd-Tb-Dy的串级试验结果.     

Li-LSX沸石中阳离子分布与空分性能的研究

利用静态交换与动态柱交换的方法对低硅KNaX沸石进行Li~+交换．用XRD， ICP测定样品的晶相及化学红外光谱对LSX在Li~+交换中的骨架振动进行了研究．结 果表明：在Li~+交换过程中，谱峰的位移与本身性质有关，而且与LSX骨架中的离 子位置有关．还探讨了在高交换度的Li-LSX样品上的空分性能布的关系．     

质子化硼烷正离子体系电子结构的理论研究

本文用a b initio计算法和近似a b initio计算法(PRDDO)研究了质子化硼烷正离子体系的电子结构,给出了一些正离子体系的优化几何构型并讨论了它们的成键情况。计算的硼烷分子质子亲和势与实验值相当吻合。