Numerical Study of the Near-Wall Gas-Droplet Jet in a Tube with a Heat Flux on the Surface

A model for calculating the flow of a turbulent mixture of air and suspended liquid particles injected into the near-wall region is developed within a unified approach of mechanics of heterogeneous media in the two-velocity and two-temperature approximation of the Eulerian approach. The influence of droplet evaporation in the near-wall jet on heat transfer between the two-phase gas-droplet flow and the wall is studied in the case of heat addition to the latter. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 1, pp. 5–17, January–February, 2006.     

Effect of NaCl and KCl doping on the growth of sulphamic acid crystals

The nonlinear optical single crystals of doped sulphamic acid (SA) were grown from aqueous solution by doping with NaCl and KCl using slow evaporation method. Powder X-ray diffraction studies confirm that the grown crystals belong to orthorhombic system. The density and melting point measurements of the grown crystals were determined by floatation technique and capillary tube method, respectively. The range of optical transmittance was ascertained by recording the UV–Vis–NIR spectrum. Atomic absorption study reveals the presence of dopants in the doped crystals. The thermal analyses indicated that the doped SA crystals are more stable than pure crystals. The Vicker's microhardness studies revealed that the dopants increased the hardness of the crystals. SHG efficiency studies of the crystals are found to be increased in the presence of NaCl and KCl dopants.     

Two-phase annular flow and evaporative heat transfer in a microchannel

A physical and mathematical model has been developed to predict the two-phase flow and heat transfer in a microchannel with evaporative heat transfer. Sample solutions to the model were obtained for both constant wall temperature and constant wall heat flux conditions. Results are provided for evaporation rate, liquid film thickness, liquid and vapor phase pressure and temperature distributions. In addition to the sample calculations that were used to illustrate the transport characteristics, computations based on the current model were performed to generate results for comparisons with the experimental results of Qu and Mudawar (2004) where two different mass flow rates of the working fluid were used in the experiment. The comparisons of total pressure drops with the experimental data of Qu and Mudawar (2004) cover the wall heat flux range of 142.71-240 W/cm² with a total channel mass flux of 400.1 kg/m² s and also the wall heat flu range of 99.54-204.39 W/cm² with total channel mass flux of 401.9 kg/m² s. The calculated results from the current model match closely with those of Qu and Mudawar (2004).     

Structural and optoelectronic properties of antimony tin sulphide thin films deposited by thermal evaporation techniques

Thin films of SnSb₂S₄ have been prepared on glass substrate by using thermal evaporation techniques. The films were annealed in argon gas at low pressure in sealed glass ampoules at 85 °C, 150 °C, 275 °C and 325 °C. XRD of the films reveal that the low temperature annealed films are poly crystalline while the as deposited films and high annealed films are in amorphous states. There is no adequate variation in the photoconductivity response of the amorphous and crystalline phases. The transmittance of the films is low and having no transmittance below 740 nm. The band gap calculated by ellipsometry technique is in the range of 1.82–3.1 eV. The films have n-type conductivity but the film annealed at 325 °C show p-type conductivity.     

Novel techniques for the prepartion of synthetic diamond

Abstract

The objectives of this work are two fold: (1) to study the effect of using oxygen-acetylene flame grown synthetic diamond as seed crystals for the high pressure-high temperature conversion of graphite into diamond and (2) to demonstrate the ability to produce small crystallites of diamond by a simple, electron beam evaporation technique. In each case, the production of diamond from graphite was confirmed.     

Beyond the Semiclassical Description of Black Hole Evaporation

In the semiclassical treatment, i.e. in a classical black hole geometry, Hawking quanta emerge from trans-Planckian configurations because of scale invariance. There is indeed no scale to stop the blueshift effect encountered in the backward propagation toward the event horizon. On the contrary, when taking into account the gravitational interactions neglected in the semiclassical treatment, a new UV scale could be dynamically engendered and could stop the focusing. To show that this is the case, we use the large-N limit, where N is the number of matter fields. In this limit, the semiclassical treatment is the leading contribution. Nonlinear gravitational effects appear in the next orders and in the first of these, the effects are governed by the two-point correlation function of the energy–momentum tensor evaluated in the vacuum. In this case they can also be obtained by considering light propagation in a stochastic ensemble of metrics whose mean fluctuating properties are determined by this two-point function.     

Correlation between structure and photoluminescence in amorphous hydrogenated silicon nitride alloys

As-deposited a-SiN_x:H (0.1<x<0.9) thin films prepared by evaporation of silicon under a flow of nitrogen and hydrogen ions exhibit visible photoluminescence at room temperature without any posttreatment. The nitrogen concentration was determined by X-ray photoemission spectroscopy. The structural characterization was performed with Fourier transform infrared absorption spectroscopy. The optical gap was obtained from transmission measurements in the ultraviolet–visible–near infrared range. These studies were correlated to the evolution of the photoluminescence properties.     

Electrostatic Charge Measurement and Charge Neutralization of Fine Aerosol Particles during the Generation Process

An aerosol charge analyzer has been constructed to measure the charge distribution of NaCl particles generated in the laboratory. A radioactive electrostatic charge neutralizer utilizing Po‐210 was used to neutralize the electrostatic charge of the particles. The atomization technique was used to generate NaCl particles with diameters of 0.2 to 0.8 μm, while the evaporation and condensation method was adopted to generate particles of 0.01 to 0.2 μm in diameter. The experimental data demonstrates that the absolute average particle charge depends on the particle diameter, and is higher than that calculated by the Boltzmann charge equilibrium for particles within the range of 0.2 to 0.8 μm. The charge increases with decreasing NaCl concentration. When these particles are neutralized using the Po‐210 neutralizer, it is found that the electrostatic charge reaches the Boltzmann charge equilibrium. For 0.01 to 0.2 μm NaCl particles generated using the evaporation and condensation method, test results show that the absolute average particle charge is higher than that calculated by the Boltzmann charge equilibrium for particles larger than 0.03 to 0.05 μm in diameter, while it is lower than that predicted by the Fuchs theory [1], for particles smaller than 0.03 to 0.05 μm. However, after charge neutralization, particles with diameter above 0.05 μm reach the Boltzmann charge equilibrium condition, and the charges for particles with diameters of 0.010 to 0.05 μm, agree well with Fuchs' theory.     

Optical measurements on semiconductor microcrystal beams generated by gas evaporation

We have developed a simple measurement method for measuring the optical spectra of free microcrystals, by combining the time-resolved and space-resolved spectroscopies with the gas evaporation method. The structure of the obtained spectra and their time- and space-dependencies indicate well the quantum-confinement effects of carriers and excitons in free semiconductors microcrystals.     

Triphasic FE Modeling of the Skin Water Barrier

A skin–air model is developed to model the water barrier function of skin. The skin model is a porous solid saturated with a monovalent salt solution. The air model is a vapor diffusion model in non-moving air. In vivo measurements of water loss from human skin under varying ambient conditions are used to validate the model.