Two-photon absorption in quadrupolar pi-conjugated molecules: influence of the nature of the conjugated bridge and the donor-acceptor separation

Quadrupolar-type substitution of pi-conjugated chromophores with donor and acceptor groups has been shown to increase their two-photon absorption (TPA) response by up to two orders of magnitude. Here, we apply highly correlated quantum-chemical calculations to evaluate the impact of the nature of conjugated bridge and the charge-transfer distance on that enhancement. We compare chromophores with phenylenevinylene-, thienylenevinylene-, polyene-, and indenofluorene-type backbones substituted by dimethylamino and cyano groups. In all compounds, we find a strongly TPA-active A(g) state (either 2A(g) or 3A(g)) in the low-energy region, as well as a higher lying TPA-active state (mA(g)) at close to twice the energy of the lowest lying one-photon allowed state; the smaller energy detuning in the mA(g) states results in very large TPA cross sections delta. We also investigate the influence of the degree of ground-state polarization on TPA. Independent of the nature of the backbone and the donor-acceptor separation, delta displays the same qualitative evolution with a maximum before the cyanine-like limit; the highest TPA cross sections are calculated for distirylbenzene- and polyene-based systems.     

Formation of Negative Hydrogen Ions in a Ne–H2 Hollow Cathode Discharge

The formation of negative hydrogen ions in a conventional hollow cathode discharge has been investigated. A mixture of Ne and H₂ proved to be more advantageous compared to pure hydrogen. The study has been performed by solving the electron Boltzmann equation, coupled with a system of balance equations for neon and hydrogen neutral and charged particles. The vibrational distribution function of hydrogen has been calculated. Our calculations show unusually high population of vibrationally excited hydrogen molecules in a Ne–H₂ mixture, which explains the high density of negative hydrogen ions under optimal conditions (total gas pressure of few Torr, hydrogen number mole fraction of 1–10% and discharge current of 10–100 mA). Line intensities originating from highly excited neon states vs. hydrogen pressure have been calculated and a comparison with existing experimental results has been made.     

激光诱导等离子体中的电子密度和电子温度的测量

脉冲激光诱发等离子体的谱诊断技术用来对其电子密度和电子温度的测量结果与理论计算进行了比较，同时讨论了运用这个方法的物理条件．     

Ab initio calculations of small hydrides including electron correlation

Five different structures of CH₅ ⁺ and one structure of CH₅ ^– are calculated using a gaussian basis both in the SCF approximation and with the inclusion of electron correlation in the independent electron pair approximation (IEPA). While on SCF level the C _sstructure of CH₅ ⁺ has to lowest energy, the energy difference between the C _sand C _2vstructures becomes negligible if correlation is included. In contrast to this the approach of a proton to CH₄ at large and intermediate distances is most favorable towards a corner of the CH₄ tetrahedron which means a structure. The decomposition of CH₅ ⁺ into CH₃ ⁺ and H₂ requires 20kcal/mol on SCF level and 40 kcal/mol if correlation is included.     

Structure of Charge Transfer Reaction Complexes Formed in Anionic Polymerization of Isoprene

A new mechanism is suggested for the anionic polymerization of isoprene. The key moment of this mechanism is thermal electron excitation of the complex of a living polymer with a monomer to the low lying S₁ (T₁) state involving a charge (electron) and (Li⁺) cation transfer from the terminal unit to the monomer molecule. It is stated that the probability of chemical bonding depends on the spin density on the radical centers of reactant molecules and on the geometry of the reaction complex. The semiempirical AM1 and ab initio 6-31G* quantum-chemical calculations revealed strong interaction for the ground electronic state of the complex (5-10 kcal/mole) and low energies of the excited triplet levels (<10 kcal/mole).     

Poly(methyl methacrylate)/silica/titania ternary nanocomposites with greatly improved thermal and ultraviolet-shielding properties

Poly(methyl methacrylate) (PMMA)/silica/titania ternary nanocomposites with covalent bonding interaction between polymer and inorganic phases have been prepared using a novel non-hydrolytic sol-gel method. Transmission electron microscope (TEM) image of silica/titania binary inorganic component indicates a core-shell-like structure. Scanning electron microscope (SEM) images suggest that the well dispersed silica/titania particles in the hybrid are on the nanometer-scale. The transparencies of nanocomposites are maintained in visible region while the absorption band in ultraviolet (UV) region is red shifted with increasing inorganic content. The thermogravimetric analysis (TGA) results show that the thermal stability of PMMA copolymer increases dramatically with the addition of silica/titania moieties both in nitrogen and in air.     

Electronically-coupled MM quadruply-bonded complexes of molybdenum and tungsten

The reaction of M2(O2CBu(t))4 (M = Mo, W) with a dicarboxylic acid in toluene yields compounds of general formula [M2]-O2C-X-CO2-[M2] ([M2] = M2(O2CBu(t))3; X = conjugated spacer). The M2 units are electronically coupled via interactions between the M2 delta and dicarboxylate pi* orbitals, and the magnitude of this coupling is revealed by electronic structure calculations and spectroscopic data. These compounds show intense metal to ligand charge transfer (MLCT) absorptions in the visible region of the electronic spectrum that are temperature and solvent dependent. Evidence of electronic coupling is seen in their cyclic voltammograms, which show two successive one-electron oxidations. The extent of electronic coupling in the mixed valence radical cations [M2]-O2C-X-CO2-[M2]+, generated by oxidation with one equivalent of AgPF6 or FeCp2PF6, is evaluated by EPR and UV-vis-NIR spectroscopic data, and delocalized behavior is observed in compounds with W2 units separated by up to 13.6 angstroms. The simplicity of the frontier M2 orbital interactions with the bridge pi orbitals provides a convenient system with which to study electron transfer in mixed valence systems, as compared to the extensively studied, but more complicated, dinuclear t(2g)6/t(2g)5 mixed valence compounds. Oligomeric and polymeric compounds incorporating M2 units have also been synthesized, having general formula [M2(O2CR)2(O2C-Thio-CO2)]n (Thio = n-hexyl substituted ter- and quinque-thiophenes). They can be deposited as thin films by spin coating, and show photoluminescence and electroluminescence. These metallo-polythiophenes show potential for application in electronic materials. (     

Structural dependence of non-linear optical properties of 4-Dimethylamino-3-cyanobiphenyl

 4-Dimethylamino-3-cyanobiphenyl (4-DMA-3-CB) was characterized with respect to linear and nonlinear optical properties in a crystal as well as in solution. The crystal structure was studied dependent on the crystallization conditions. It is shown that the crystal structure exhibiting NLO-activity can completely be solved by a combination of electron diffraction and computer modeling. There are four molecules per unit cell in the space group Pna2₁ with dimensions a=10.28 Å, b=22.64 Å, c=5.27 Å. From this model structure the values and orientation of the dipole μ and static second order polarizability β can be calculated. Their relevance to the values obtained by a combination of polarization dependent measurements of Electric Field Induced Second Harmonic Generation (EFISH) and Hyper-Rayleigh-Scattering (HRS) in solution are discussed. The molecular second order polarizability tensor was found to be dominated by one single component. The orientations of the dipole and the vectorial parts of the second order polarizability delivered by the semiempirical calculations are in good agreement with the results of the EFISH and HRS-measurements and allow a deeper insight into the nonlinear optical properties of the crystal. Received: 15 April 1996 Accepted: 21 June 1996     

The study of electron beam flue gas treatment for coal-fired thermal plant in Japan

The fundamental research work with simulated coal-fired flue gas was performed in JAERI to get basic data for electron beam treatment of flue gas from thermal power plants in Japan. The standard condition of the experiments was set to be the same as that of next large scale pilot test in Nagoya. The concentrations of NO_x and SO_x were 225 ppm and 800 ppm, respectively. The temperature of the system was 65°C. The effect of multiple irradiation was observed for NO_x removal. The target SO_x and NO_x removals (94% and 80%, respectively) with low NH₃ leakage (less than 10 ppm) were achieved at 9 kGy irradiation with 0.9 NH₃ stoichiometry during 7 hours continuous operation. The facility for the pilot plant (12,000 Nm³/hr) has just built at the site of Shin-Nagoya power plant of Chubu Electric Power Company and will be started in full operation in November 1992.     

Electromagnetic interference shielding and radiation absorption in thin polypyrrole films

Results of permittivity measurements, electromagnetic interference shielding effectiveness, and heat generation due to microwave absorption in conducting polymer coated textiles are reported and discussed. The intrinsically conducting polymer, polypyrrole, doped with anthraquinone-2-sulfonic acid (AQSA) or para-toluene-2-sulfonic acid (pTSA) was applied on textile substrates and the resulting materials were investigated in the frequency range 1-18 GHz. The 0.54 mm thick conducting textile/polypyrrole composites absorbed up to 49.5% of the incident 30-35 W microwave radiation. A thermography station was used to monitor the temperature of these composites during the irradiation process, where absorption was confirmed via visible heat losses. Samples with lower conductivity showed larger temperature increases caused by microwave absorption compared to samples with higher conductivity. A sample with an average sheet resistivity of 150 Ω/sq. showed a maximum temperature increase of 5.27 °C, whilst a sample with a lower resistivity (105 Ω/sq.) rose by 3.85 °C.