尖晶石锂锰氧化物锂离子嵌脱过程的交流阻抗谱研究

用粉末微电极研究了尖晶石锂锰氧化物在不同嵌锂状态下嵌脱锂过程的交流阻 抗图谱，提出了新的等效电路模型。描述锂离子在固体中扩散的Warburg阻抗与累 积或消耗的嵌入电容在Lix MnO4中的x≤0．5时串联，0．5＜x≤1时并联。用提出 的等效电路模型分阶段拟合了实验所得的交流阻抗谱，拟合值与实验值相当吻合， 由拟合结果得到不同电位下锂离子在表面膜中的迁移电阻和电容，界面电荷传递电 阻，双层电容，锂离子在固体中扩散系数和累积或消耗的嵌入电容。     

Towards advanced circuit board materials: adhesion of copper foil to ultra‐high molecular weight polyethylene composite

Polyethylene based composites are attractive materials for advanced circuit board applications because of their unique combination of properties: low dielectric constant and loss factor, light weight, high flexural modulus and low thermal expansion coefficient controlled in all spatial directions. This investigation describes a process to consolidate chopped fibers of ultra‐high molecular weight polyethylene concurrently with its bonding to a copper foil. Bonding is affected by a thin sheet of low‐density polyethylene, incorporating a crosslinking agent with a concentration gradient across the sheets thickness. In this single step process, the composite material is formed and bonded to the metal foil, achieving good adhesion without the use of extraneous glue. Copyright © 2002 John Wiley & Sons, Ltd.     

A practical synthesis of carbamates using an ‘in-situ’ generated polymer-supported chloroformate

A versatile method for the synthesis of carbamates from an ‘in-situ’ generated polymer-supported chloroformate resin is presented. BTC (bis-trichloromethyl carbonate) is used as phosgene equivalent to afford a supported chloroformate, which, by sequential ‘one-pot’ reaction with a variety of alcohols and amines, furnishes the corresponding carbamates in high yields and purities.     

甲烷氧化细菌催化二氧化碳生物合成甲醇的研究

甲烷氧化细菌中包含的甲烷单加氧酶(MMO)、甲醇脱氢酶(ADH)、甲醛脱氢酶(FaldDH)、甲酸脱氢酶(FateDH)经过一系列反应能够把甲烷深度氧化生成二氧化碳，并生成一定的能量物质．把二氧化碳还原为甲醇是一个需要能量的过程，目前还没有已知的有机体在温和条件下完成这一反应．研究发现，甲基弯菌Methylosi-nus trichosporium IMV 3011可以催化二氧化碳生物转化生成甲醇．在休眠的悬浮细胞中充人二氧化碳后，反应一段时间在反应液中检测到了甲醇．二氧化碳转化成甲醇是一个需要能量推动的反应，为了补充反应所消耗的能量．反应一段时间后需要用甲烷进行再生，以恢复细胞中的还原当量NADH．我们进行了反应再生的交替连续批式反应，甲醇积累量能够维持在一个比较稳定的水平．理论上，反应不会增加温室效应，这是一个有效的、环境友好的、可恢复的反应过程．     

Conductance studies in amide-water mixtures. II. Sodium salts inN,N-dimethylformamide-water mixtures at 35°C

Conductance data for sodium nitrite, chloride, and acetate in water andN,N-dimethylformamide (DMF)-water mixtures (74.82D42.48) for the concentration range 0.001–0.04N, as well as the densities, viscosities, and dielectric constants of the solvent mixtures at 35°C, are reported. The data have been analyzed by the Fuoss (1975) equation. The existence of a maximum in the viscosity at a 13 mole ratio of DMF and water is indicated. The Walden products for all the three salts pass through a maximum while the equivalent conductances show a minimum with increasing DMF content. The maxima in the Walden product are attributed to the dehydration of ions by the cosolvent (DMF).Part I:Indian J. Chem. 14A, 1015 (1976).Deceased.     

Bioanalytical methods applied to endocrine disrupting polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans. A review

The usual methods for determining polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and polychlorinated biphenyls (PCB) are generally expensive and time consuming. This fact has favored the development of faster and cheaper techniques, based on immunoassays and bioassays. This paper reviews these bioanalytical methods and their analytical importance at the present moment.     

等效剂在合成中的应用研究：Ⅵ.合成二氢茉莉酮的新途径

茉莉酮和二氢茉莉酮是一类名贵的香料,此类化合物的合成一直是人们所关注的问题。已有许多报道,其中包括庚醛、1-硝基庚烷与甲基乙烯基酮进行Michael加成和以硝代甘缩酮与庚醛进行硝-醛缩合制得1,4-二酮,再进行分子内缩合为二氢茉莉酮。这些合成方法,有的对反应条件要求较苛刻,不易操作,有的则反应步骤较多,收率低。最近,白俊才等以甲基乙烯基酮和1-己烯为原料,合成了二氢茉莉酮,此法虽然新颖,但氧硼杂环己烷中间体     

Ab initio studies on reaction H2C=C(OH)Li+CH3 + (CH3 -)

The possible structures and isomerizations of H₂C=C(OH)Li are studied theoretically by the gradient analytical method at RHF/6-31+G level. According to these results, reactions of H₂C=C(OH)Li with CH₃ ⁺ and CH ₃ ^- are investigated thoroughly. When H₂C=C(OH)Li reacts with CH ₃ ⁺ , H_zC=C(OH)Li firstly changes from structure1 to structure4, and then combines with CH₃ ⁺. In this reaction, the configuration of central carbon is retained. When H₂C=C(OH)Li reacts with CH ₃ ^- , structure1 firstly breaks its C-O bond to give contact ion-pair. Then through transition state16 which is similar to structure2, the attack of CH ₃ ^- from the opposite side of^-OH replaces^-OH group and inverts the configuration of carbenoid carbon atom. All the results show that the ambident reactivity of carbenoid has close relationship with the stability of special structures. Project supported by the National Natural Science Foundation of China (Grant No. 29773025).     

废弃线路板化学分析采样、制样及检测方法

介绍废弃线路板中有回收价值元素和有害物质分析的采样、制样及检测技术。样品经过分类采样、剪切破碎和高温灰化制样,采用样品全分析或副批混合样分析。通过提高称样量、多次测定求平均值的办法,火试金富集-重量法测定贵金属金、银。湿法王水溶解样品,碘量法测定主体元素铜。电感耦合等离子体发射光谱(ICP-AES)法测定其它杂质元素,被测元素质量浓度在0~10μg/mL范围内与光谱强度呈良好线性关系,相关系数均大于0.9998。测定结果的相对标准偏差小于10%(n=5),加标回收率为97.0%~102.5%。该方法简单、快速,有效地解决了线路板样品不均匀而难采样,以及硬度、韧性强制样难,金属易包裹难分解的技术瓶颈,测定结果准确,具有代表性。该方法适用于废弃线路板化学成分分析,其它废弃电子产品检测可参考此方法。     

Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.