短波通滤光片膜系设计

详细介绍用等效折射率概念设计短波通滤光片的原理和计算方法。根据原理和方法，选择二氧化钛（TiO2）作为高折射率材料、二氧化硅（SiO2）作为低折射率材料。首先从理论上计算出用这2种材料设计的波长λ=950～1150nm的短波通滤光片所需要的周期数，然后给出短波通滤光片的主膜系和光谱曲线。由于据此周期数设计出的膜系光谱曲线在750～810nm处的透过率不符合要求，因此对该膜系进行了改进。依照改进的设计进行多次制备，最终制备出了符合要求的短波通滤光片，找到了最佳制备工艺和方法。最后，对制备出来的短波通滤光片薄膜进行了各种环境实验。实验结果表明，膜层的各项指标符合设计要求。     

脉冲激光引信用PFM和PWM式LD驱动电路的研究

 在激光引信的通讯系统中，针对引信用脉冲式半导体激光器驱动电路的脉冲宽度、频率、功率可调的需要，根据LD驱动电路的工作原理，建立了LD驱动电路的一般模型。然后用电子多频振荡器提供驱动信号，用双MOS驱动器来驱动半导体激光器，通过大量的实验、仿真、分析、比较，设计出了方便可调的大功率LD的驱动电路，该电路的脉冲频率和脉冲宽度可方便调整。并且该驱动电路的频率调节范围大（10Hz~20kHz）；脉冲宽度可以从几ns到几百ns进行调节，大大提高了激光引信通讯系统的性能与可靠性。     

新型电感储能脉冲功率驱动源

提出了将传统单个储能电感利用传输线分隔成两部分的新型电感储能脉冲功率驱动源技术方案。理论分析表明,利用传输线电容的耦合延时作用,可有效对调制器输出脉冲波形进行整形,并且可以进一步提高能量转换效率,从而克服传统电感储能脉冲功率源输出波形质量差(类三角波波形)的缺点。基于该思想开展了实验研究,获得了电压约300 kV,电流约20 kA的电子束,并成功驱动S波段磁绝缘线振荡器获得了百MW量级的微波输出。     

Mathematical and physical modelling of the dynamic fluidic impedance of arteries using electrical impedance equivalents

In this work, a detailed mathematical and physical model for calculating the fluidic impedance of an artery is developed. Initially, the model calculates the impedance of a healthy artery, and then, it compares this with the alteration in the impedance of an artery with atherosclerosis. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface Acoustic Wave Characterization of Equivalent Young's Moduli for Patterned Films北大核心CSCD

Based on the equivalent elasticity theory for layered materials, the micro-mechanics equivalent models for single and dual damascene structures were established. The equivalent elastic constant of the patterned structure was introduced, to establish the propagation model for the surface acoustic waves propagating in the layered structure of the patterned film/ substrate, and the theoretical dispersion curves of the surface acoustic waves were calculated with Green’s function and the matrix method. The finite element method was used to calculate 24 numerical examples of damascene structures with different volume ratios, and the results were compared with those of the strain energy method. The results show that, the average relative errors of the equivalent Young’s moduli of the 300 nm-thick dual damascene film and the 100 nm-thick single damascene film are 2.06% and 2.27%, respectively. The research verifies the correctness of the equivalent patterned structure model and the feasibility of the surface acoustic wave method to characterize the mechanical properties of patterned films, and provides a reference for the development of suitable chemico-mechanical polishing technologies for patterned films under low pressure. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

海生物附著对钢板管椿腐蚀之影响

为了解海生物对钢板管椿腐蚀之影响 ,将SS4 1金属试片浸渍于高雄港 #1 4码头水深 3m处及实验室人造海水中 .试验期间 ,以DC直流动电位极化曲线扫描与AC交流电阻抗分析现场量测各试片的瞬间腐蚀速率 .结果发现 :宏观地看 ,海生物在金属 (或锈层 )表面的附著可以减缓金属腐蚀 ,但从微观 (micro)的观点推论 ,海生物在金属表面的附著亦可以造成氧差或浓度差异电池 ,促成局部腐蚀 .此外 ,等效电路的模拟 ,有助于了解海生物附著对金属腐蚀的影响 ,即随浸渍时间的延长 ,金属表面因锈层增厚且趋于致密 ,以致锈层电阻增加 ;又因海生物种类不同 ,含水量不同 ,海生物电阻可能会有极大的差异     

Direct numerical simulation methods of hypersonic flat-plate boundary layer in thermally perfect gas

High-temperature effects alter the physical and transport properties of air such as vibrational excitation in a thermally perfect gas,and this factor should be considered in order to compute the flow field correctly.Herein,for the thermally perfect gas,a simple method of direct numerical simulation on flat-plat boundary layer is put forward,using the equivalent specific heat ratio instead of constant specific heat ratio in the N-S equations and flux splitting form of a calorically perfect gas.The results calculated by the new method are consistent with that by solving the N-S equations of a thermally perfect gas directly.The mean flow has the similarity,and consistent to the corresponding Blasius solution,which confirms that satisfactory results can be obtained basing on the Blasius solution as the mean flow directly in stability analysis.The amplitude growth curve of small disturbance is introduced at the inlet by using direct numerical simulation,which is consistent with that obtained by linear stability theory.It verified that the equation established and the simulation method is correct.     

电流镜及其在多值I2L电路开关级设计中的应用

运用开关信号理论和有界算术运算理论，对电流镜的多种性质进行了讨论，并系统研究了利用电流镜实现电流信号的各种算术运算，其中倍除运算属于初次提出，最后通过N进制半加电路和N值比较电路等两个设计实例介绍了电流镜技术在I^2L电路开关级设计中的应用。     

神经元电生理学等效电路模型及参数特性研究

从考虑神经元轴突朗飞结的电缆模型入手,根据脑磁图和电磁场理论的“场路一致性”原理,讨论了应该从著名的Hodgkin-Huxley一阶静态等效电路扩展为二阶动态电路的合理性和必要性,并通过具体的计算实例进一步研究电生理学材料参数膜电容C 和电感L的频率特性,实验结果表明,有髓神经元纤维轴向信号传递速度越快,其电容和电感值就越小.     

薄膜介质层绕式Blumlein线理论与实验研究

对薄膜介质层绕式Blumlein线的特性参数进行了理论分析。采用Pspice软件对电路模型进行了计算,分析了开关电感、寄生电阻对负载输出波形的影响。结果表明:开关电感的存在使得负载波形前沿变缓,后延波形扭曲变差,寄生电阻会影响负载的电压输出效率。采用模拟软件对传输线中的电磁场分布进行了计算,结果表明薄电极边缘场畸变以及折叠弯曲部分的场变化是绝缘介质耐压必须考虑的因素。基于此理论分析,设计制作了一种新型薄膜介质Blumlein线,绝缘材料为聚酯薄膜,单层薄膜厚100μm,电极为厚50μm的铜皮,单元模块设计耐压50 kV。进行了三级模块串联叠加实验,充电25 kV,匹配负载输出60 kV,脉冲上升沿80 ns,脉冲宽度200 ns。