SO2气体激光诱导色散荧光时间断层扫描研究

以纳秒Nd:YAG激光器的四倍频（266 nm）为激发源,利用门选通增强光学多通道光谱分析仪 (OMA),研究了SO2分子第一激发带粒子的荧光辐射与碰撞弛豫相结合的复杂退激发过程。通过对SO2分子第一激发带的激发及碰撞弛豫过程的时间断层扫描分析,可以将激光诱导色散荧光谱中以305.6 nm、337.2 nm为中心的荧光包络和以424.7 nm为中心的规则序列分别归属于B1B1、A1A2低振动能级和a3B1基振动能级到基电子态X1A1不同振动能级的荧光跃迁,由此可以确定大气污染气体SO2的诱导荧光的灵敏检测波长为425 nm;由规则序列的实验数据可以计算出SO2分子基电子态X1A1的对称振动和弯曲振动模式的基振动角频率分别为ω1= 1151.8±0.6 cm-1和ω2= 517.8±0.6 cm-1,两振动模式的非谐性常数分别为 = 8±0.6 cm-1和 = 9.2±0.6 cm-1。     

激波诱导下纳米铝粉与微米铝粉的爆炸特征对比研究

对比研究了入射激波诱导下纳米铝粉和微米铝粉与环氧丙烷混合物快速反应系统中的爆炸特征.利用多台单色谱仪同步采集技术实验测定了二种反应混合物在不同诱导激波中强度作用下的点火延迟时间.为获得爆炸系统内部信息利用扫描电子显微镜(SEM),X射线衍射分析仪(XRD),X射线能谱(XPS)对相应铝粉反应生成物的结构、态貌、表面氧化层厚度进行了表征和分析.结果表明:TEM结果表明纳米铝粉生成物为絮状、针状和纤维状,而微米铝粉生成物为球状且体积增大;XRD结果显示在压缩区、点火区、燃烧区、爆炸区、传播区、碎片压缩致冷区生 关键词： 诱导激波 点火 XPS能谱 铝粉     

第一性原理研究KDP晶体中Ba取代K点缺陷

 用基于第一性原理的CASTEP模拟了Ba替代K缺陷前后形成的电子结构和能态密度。发现晶体能带宽度降至6.4 eV左右,对应着380 nm的双光子吸收,这一结果可以解释掺Ba晶体在紫外波段的吸收现象。Ba替代K点缺陷仅使其周围的晶格及电子结构发生轻微畸变,对晶体整体结构影响不大。     

Spectral features of laser induced plasma from YBa2Cu3O7 and GdBa2Cu3O7 highT c superconductors

Laser induced plasma emission spectra from highT _c superconducting samples of YBa₂Cu₃O₇ and GdBa₂Cu₃O₇ obtained with 1.06μm radiation from a Q switched Nd:YAG laser beam has been analysed. The results clearly show the presence of diatomic oxides in addition to ionized species of the constituent metals in the plasma thus produced.     

脉冲激光辐照光学薄膜的缺陷损伤模型

建立了缺陷吸收升温致薄膜激光损伤模型,该模型从热传导方程出发,考虑了缺陷内部的温度分布以及向薄膜的传导过程,通过引入散射系数简化了Mie散射理论得出的吸收截面.对电子束蒸发沉积的ZrO₂:Y₂O₃单层膜进行了激光破坏实验,薄膜样品的损伤是缺陷引起的,通过辉光放电质谱法对薄膜制备材料的纯度分析发现材料中的主要杂质元素为铂,其含量为0.9％.利用缺陷损伤模型对损伤过程进行了模拟,理论模型和实验结果取得了较好的一致性.     

Induced focusing and conversion of a Gaussian beam into an elliptic Gaussian beam

We have presented an investigation of the induced focusing in Kerr media of two laser beams, the pump beam and the probe beam, which could be either Gaussian or elliptic Gaussian or a combination of the two. We have used variational formalism to derive relevant beam-width equations. Among several important findings, the finding that a very week probe beam can be guided and focused when power of both beams are well below their individual threshold for self-focusing, is a noteworthy one. It has been found that induced focusing is not possible for laser beams of any wavelength and beam radius. In case both beams are elliptic Gaussian, we have shown that when power of both beams is above a certain threshold value then the effective radius of both beams collapses and collapse distance depends on power. Moreover, it has been found that induced focusing can be employed to convert a circular Gaussian beam into an elliptic Gaussian beam.     

脉冲充磁的超导圆盘的电流密度和俘获场分布的研究

本从第一性原理出发，计算了充磁线圈产生的磁场，脉冲充磁的超导圆盘中的感应电流密度和俘获场分布．以超导体中的电流运动方程为基础，通过磁通动力学方程E=Ec(J/Jc)^n和物质方程B=μ0H表示超导圆盘的超导特性．计算表明第一个脉冲充磁电流的峰值和磁通蠕动指数对于超导圆盘中的感应电流分布非常重要．同时研究了充磁电流的宽度，波形，第二个充磁电流的峰值和充磁线圈的形状对于俘获场的影响．计算表明不断减小脉冲充磁电流峰值的反复充磁可以保持超导圆盘中的感应电流密度的平台在一确定水平．     

Dependence on substrate topography of growth of nanosized dendritic structures in an electron-beam-induced deposition process

Nanometer-sized W-dendrites are fabricated on Al₂O₃ substrates with an electron-beam-induced deposition process. Dependence of growth of nanodendrite on surface topography is investigated with transmission electron microscopy. It is confirmed that the nanodendrite grows on convex surfaces but not around a hole on a substrate. These are attributed to different distribution of charges on surfaces with different topographies during electron beam irradiation when charges are produced on the surface due to emission of second electrons. The charges accumulate on convex surface and do not distribute around a hole. Therefore, the nanodendrite grows on the former and not on the latter.     

Atomic coherence in nondegenerate four-wave mixing

Two-photon resonant nondegenerate four-wave mixing (NFWM) with the addition of a coupling field in Ba atomic vapour has been studied. We find that coherence of the atomic level transitions leads to suppression of the NFWM signal, giving rise to a dip with a linewidth that is linearly proportional to the intensity of the coupling field.     

脉冲激光诱导光纤损伤的测试方法

 针对传能光纤的高峰值功率激光损伤过程,研究了光纤损伤测试方法。实验装置搭建中增加了定位孔,有利于激光注入光纤对准;分别采用刀口法和CCD法对入射光束不同截面处光斑大小进行了测量,两种方法的测量结果基本一致。参考GJB1487-92激光光学元件测试方法和ISO11245光学表面的激光诱导损伤阈值测试方法,采用N-ON-1损伤测试和有效光斑面积计算方法对芯径为400 μm的石英包层阶跃折射率石英光纤进行了损伤阈值测试。实验发现：光纤损伤部位全部为入射端面,利用200倍显微镜观察光纤端面,出现明显永久性损伤点。最后采用统计学原理和线性拟合等方法得出测试光纤的端面零概率损伤阈值为3.85 GW/cm²。