Nuclear Structure and Electromagnetic Transitions Investigation in Er Isotopes within Framework of Interacting Boson Model

Interacting Boson Model-2(IBM-2)is used to determine the Hamiltonian for Er nuclei.Fit values of parameters are used to construct the Hamiltonian,energy levels and electromagnetic transitions(B(E2),B(M1))multipole mixing ratios(δ(E2/M1))for some even-even Er nuclei and monopole transition probability are estimated.New ideas are used for counting bosons number at N=64 and results are compared with previous works.     

New method to solve electromagnetic parabolic equation

This paper puts forward a new method to solve the electromagnetic parabolic equation （EMPE） by taking the vertically-layered inhomogeneous characteristics of the atmospheric refractive index into account. First, the Fourier transform and the convo- lution theorem are employed, and the second-order partial differential equation, i.e., the EMPE, in the height space is transformed into first-order constant coefficient differential equations in the frequency space. Then, by use of the lower triangular characteristics of the coefficient matrix, the numerical solutions are designed. Through constructing ana- lytical solutions to the EMPE, the feasibility of the new method is validated. Finally, the numerical solutions to the new method are compared with those of the commonly used split-step Fourier algorithm.     

线缆系统电磁脉冲效应测量系统研制和试验

分析了实验室瞬态X射线产生的系统电磁脉冲(SGEMP)效应测试所面临的技术问题,提出了解决方法、措施以及实验室模拟瞬态X射线的SGEMP模拟试验方法。通过电子屏蔽、电磁屏蔽、光电隔离、信号对称提取等特殊技术处理,解决了SGEMP效应模拟试验方法和测量系统抗X射线、抗电磁辐射等技术问题,并在大型瞬态X射线模拟源上,测出了瞬态X射线辐照时金属腔内线缆的SGEMP效应波形及幅值。     

Flow‐Injection Online Reduction Atomic Fluorescence Spectrometry Determination of Se(IV) and Se(VI) with Electrochemical Hydride Generation

Abstract

A new flow‐injection online reduction electrochemical hydride generation system for the determination of Se(IV) and Se(VI) by atomic fluorescence spectrometry (AFS) was developed. In the system, an electromagnetic induction oven was used as heating resource to reduce Se(VI) to Se(IV) and a homemade tubular electrolytic cell as hydride generator. All analytical procedures were automatically controlled by a computer. The conditions of online reduction, including temperature, HCl concentration, and reduction time, have been studied in detail. The detection limits (3σ) of Se(IV) and Se(VI) in aqueous solution were 0.26 µg L^?1 and 0.23 µg L^?1, respectively. The precision for 11 replicate measurements of 50 µg L^?1 Se(IV) and Se(VI) was 2.2% and 2.5%. This proposed method has been applied to the determination of Se(IV) and Se(VI) in springwater samples.     

Microwave Synthesized In2S3@CNTs with Excellent Properties inLithium‐Ion Battery and Electromagnetic Wave Absorption

The three‐dimensional nanoflower‐like β‐In₂S₃ composited with carbon nanotubes (CNTs) has been synthesized by a single mode microwave‐assisted hydrothermal technique. The In₂S₃ and CNTs nanocomposites (In₂S₃@CNTs) were investigated as the anode materials of lithium batteries (LIBs) and the electromagnetic wave absorption materials. For LIBs applications, the In₂S₃@CNTs nanocomposite exhibited excellent cycling stability with a high reversible charge capacity of 575 mA⋅h⋅g^–1 after 300 cycles at 0.5 A⋅g^–1. In addition, the In₂S₃@CNTs used as electromagnetic wave absorber displayed a maximum reflection loss of –42.75 dB at 11.96 GHz with a thickness of 1.55 mm.     

镍锌铁氧体/膨胀石墨/聚苯胺复合物的电磁损耗性能

用化学共沉淀法和原位乳液聚合法分别制备了镍锌铁氧体(Ni_xZn_1-xFe₂O₄)、Ni_0.7Zn_0.3Fe₂O₄/膨胀石墨(NZF/EG)二元复合物及其聚苯胺(PANI)包覆的三元复合物(NZF/EG/PANI)。用现代测试技术表征了样品的组成、结构、形貌和电磁性能。结果表明,NZF粒子较好地嵌入到EG的层间,PANI对NZF/EG的包覆效果良好;三元复合物的磁性能随磁性组分含量的减小而减弱,而电导率与EG和PANI的导电性及其相对含量相关联;复合物的电磁损耗性能优良,其中三元复合物优于二元复合物。含PANI 70wt%的NZF/EG/PANI三元复合物,制样厚度分别为1.5、2.0和2.5 mm时,其反射损耗峰值(有效带宽)分别为-19.99 dB(5.82 GHz),-20.33 dB (4.08 GHz)和-25.28 dB(3.67 GHz),具有优良的电磁波吸收效果。     

纳米镍钴铁氧体空心微球的制备与性能

以乙二醇为溶剂,氯化铁、氯化钴、氯化镍和醋酸铵为反应试剂,采用溶剂热法制备纳米Ni_xCo_1-xFe₂O₄(x=0、0.3、0.5、0.7、1)铁氧体空心微球,研究镍含量对铁氧体空心球的磁性与吸波性能的影响。借助X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、振动样品磁强计(VSM)和网络分析仪对试样的物相组成、微观形貌和电磁特性进行表征。结果表明制备的镍钴铁氧体为尖晶石结构,且形貌为空心球,粒径在200 nm左右。当x=0时,镍钴铁氧体空心球饱和磁化强度最大为81.7 emu·g^-1,反射损耗在1 658.8 MHz有最小值为-16.9 dB。     

Unveiling the correlation between non‐diffracting tractor beam and its singularity in Poynting vector

This paper investigates the singular optics of nonparaxial light beams in the near field when the light behaves as a tractor beam. New insights into the optical pulling force, which is usually represented by integrating the stress tensor at a black box enclosing the object, are interpreted by the optical singularity of the Poynting vector. The negative nonconservative pulling force originates from the transfer of the azimuthal Poynting vector to the longitudinal component partly owing to the presence of a scatterer. The separatrice pattern and singularity shifts of the Poynting vector unanimously exhibit a differentiable near‐field distribution in the presence of optical pulling force. A new method is established to calculate the near‐field optical force using the differential Poynting vector in the far field. The results obtained provide a clear physical interpretation of the light–matter interaction and manifest the significance of singular optics in manipulating objects.

     

Facile Fabrication of PBS/CNTs Nanocomposite Foam for Electromagnetic Interference Shielding

In order to reduce the pollutants of environment and electromagnetic waves, environment friendly polymer foams with outstanding electromagnetic interference shielding are imminently required. In this paper, a kind of electromagnetic shielding, biodegradable nanocomposite foam was fabricated by blending poly (butylene succinate) (PBS) with carbon nanotubes (CNTs) followed by foaming with supercritical CO₂. The crystallization temperature and melting temperature of PBS/CNTs nanocomposites with 4 wt % of CNTs increased remarkably by 6 °C and 3.1 °C compared with that of pure PBS and a double crystal melting peak of various PBS samples appeared in DSC curves. Increasing the CNT content from 0 to 4 wt % leads to an increase of approximately 3 orders of magnitude in storage modulus and nearly 9 orders of magnitude in enhancement of electrical properties. Furthermore, CNTs endowed PBS nanocomposite foam with adjustable electromagnetic interference (EMI) shielding property, giving a specific EMI shielding effectiveness of 28.5 dB cm³/g. This study provides a promising methodology for preparing biodegradable, lightweight PBS/CNTs foam with outstanding electromagnetic shielding properties.